This looks like the perfect solution for any noisy environment where communication is key. Like a sawmill or a factory of any kind, really. Or on the worksite where you have multiple workers on multiple floors. Have teams on different mesh groups and the foreman then can talk to each team. As you said, on the farm you can have the combine driver and truck driver actually able to communicate easily. What a concept! Thanks for making this video. Very good quality as always. :)
I work for a Electricity Distribution Network on the powerlines...We are trialing 10 sets to fit on our existing Petzl helmets and they are a game changer! Very impressive piece of kit highly recommend. Improves safety ten fold in all aspects of our work
As an arborist ive got the protos helmet as like most arborist do nowadays so ive found the sena 10s to be the best as its cheap and can fit to any helmet easy
There is little doubt that these are the best Comms units for Arb so far but the price of these are outrageously expensive. The rumour mill suggested that the Procomm uses the Senna chip. Have you looked at testing the next best against these?
Helmet comms system looks cool ! First all in one solution apart from 3m but I assume these are made by 3m going by the price 😳. Them the new solidur CLIMB trousers in the chipping clip @ 4:11 ish ?
Annoying that these are not available in the USA. We had to ship them from the UK. Worth every dollar. They work much better then the older sena name brand stuff even though they are still the ones making the electronics for these they design is just more rugged and seem to be much stronger.
To be honest the video does not do them justice. It was extremely difficult to record what we were saying. One of the headsets I placed in a toolbox with a mic between the muffs to record. Due to the mic’s and the ProCOM having noise cancelling inbuilt, they could not keep up with it together. But as you could tell we were having full on conversations so could here fine even against the chipper, I hope this helps explain 👍🏼
![[LIVE] : ONE ลุมพินี 85 | คู่เอก "ยอดเหล็กเพชร vs ผึ้งหลวง"](http://i.ytimg.com/vi/Qq_19bnnxEo/mqdefault.jpg)
This looks like the perfect solution for any noisy environment where communication is key. Like a sawmill or a factory of any kind, really. Or on the worksite where you have multiple workers on multiple floors. Have teams on different mesh groups and the foreman then can talk to each team. As you said, on the farm you can have the combine driver and truck driver actually able to communicate easily. What a concept! Thanks for making this video. Very good quality as always. :)
Thank you Sandy, I really appreciate your feedback 😃
I dont do tree work but i can definitely see these coming in handy when working in teams, saves having to shout over strimmers etc.
Yeah, they would for sure. If I was to make another one about them I would do this! Thanks Jordan!
I work for a Electricity Distribution Network on the powerlines...We are trialing 10 sets to fit on our existing Petzl helmets and they are a game changer! Very impressive piece of kit highly recommend. Improves safety ten fold in all aspects of our work
Hi James Nice one looks handy better than the hand held radios we used to use Thanks again
Haha, thanks Darran 👍🏼
As an arborist ive got the protos helmet as like most arborist do nowadays so ive found the sena 10s to be the best as its cheap and can fit to any helmet easy
these fit to photos with the 3m adapter
Love a video James with your helmet in it ..
As Kylie once said “especially for you”
i would just have to listen to music because i've no friends or workmates to talk too 😭😭🤣
If only you were within 600m we could try them out and I could have a convo with you Nev 💙
There is little doubt that these are the best Comms units for Arb so far but the price of these are outrageously expensive.
The rumour mill suggested that the Procomm uses the Senna chip.
Have you looked at testing the next best against these?
We could do a comparison! Not sure how to test which is better though.. thank you 👍🏼
have you seen the price of the protos comms? they're double the money
Helmet comms system looks cool ! First all in one solution apart from 3m but I assume these are made by 3m going by the price 😳. Them the new solidur CLIMB trousers in the chipping clip @ 4:11 ish ?
Yeah they are very I’m impressed with them by far the best trousers I’ve had in years
@@mgtreecare6914 ace I’ll have to have a look when my next pair are up for renewal
Does anybody know if these can communicate with other hand held walkie talkies?
How much do these things cost? Why can’t I find a price?
Nice helmets and review .
Enjoyed this one mate
Thank you Phil 👍🏼
Annoying that these are not available in the USA. We had to ship them from the UK. Worth every dollar. They work much better then the older sena name brand stuff even though they are still the ones making the electronics for these they design is just more rugged and seem to be much stronger.
i use kox helmet boots latzhose
Had toby on the com 🤦🤣
I'd rather listen to a station announcer. Much clearer.
To be honest the video does not do them justice. It was extremely difficult to record what we were saying. One of the headsets I placed in a toolbox with a mic between the muffs to record. Due to the mic’s and the ProCOM having noise cancelling inbuilt, they could not keep up with it together. But as you could tell we were having full on conversations so could here fine even against the chipper, I hope this helps explain 👍🏼
Here’s a demonstration of them.
th-cam.com/video/m-yi6RLZJi0/w-d-xo.html
First
Second 👍🏼