The second half of the music that everyone is complaining about sounds a lot like a Frank Zappa style vamp. rather amazing how he could take the best musicians in the world, get them together, and sound like musical insanity while actually being some of the most complex and technical musicianship. . nice work... Unfortunately, not easily modified into what I am looking for. I have to agree with one of the other posters... Instead of just overlaying the video with a music track, a voice over would or at least some text describing what and why you are doing. Serious wood workers can easily figure it out easy enough, but average DIYers who may be looking for a project may have a harder time understanding what and why you are doing in the various steps.
If you drill an 1/8 inch down with the hole saw and then drill a few small holes in the 1/8 inch swath you can give the saw dust somewhere to go and the hole saw will not bind up. Plus the hole saw will not get hot and last longer
Really enjoyed the build and what a great end result :-) just out of curiosity why did you cut the wooden sections on the band saw then on the table saw?
Great table but I cant watch anymore of this video. Everytime I watch you use your band saw I was just waiting for you to cut off a finger or something. Do you not know how to use your band saw? Trust me when youve had a saw nearly cut off your hand when shit kicks back you will learn the hard way. When your using your band saw you should always bring the adjustable guard down atleast a quarter of an inch above the material you are cutting or your gonna have something kick or grab your hands and cut off a finger. And always keep your hands atleast 3 inches from the blade called the 3 inch rule. Also if you ever plan on doing another job like this. When you do leather covering. Ive done automotive upholstery and when you roll over the leather to staple it down to your back board. You want to first start in the middle on each side of the panel, then pick one side to work with first and working from the middle outwards to the corners. Then as you move around doing the other 3 sides do the same thing. That way when you get to the corners you can tuck in any excess you have then pulling the 4 corner tabs of the leather or upholstery fabric your using over the top and staple 2 or 3 staples down the length of the folded tab before trimming it to the length of the rest you trimmed off. This method of doing this pulls your leather nice and taught and removes any wrinkles in the material.
Stop critiquing his music. For one, the music doesn't change the build. For two, you can mute your mic. Three, I actually quite like it! but that doesn't mean we all do.
Thanks for the video of how NOT to built a table. Seriously, all those awesome tools and this is the best you can do? Your craftsmanship leaves much to be desired, especially that rail.
...but the music bro, really...killed the video.
This must be my words))))
half way through the music took a pokemon turn on us
Awesome build. I like how you used poker chips in the design. Nice work!
CMR Woodworks | Chris McDowell thank you! thats my favorite part
Michael Gaspari what are the dimensions for the table as i would love to try and make it but put in my own little bit to it
I really liked this. Only slight criticism was the upholstery corners. The seam folds could have been hidden.
Agreed, he could have hid the creases on the short sides that are hidden.
The second half of the music that everyone is complaining about sounds a lot like a Frank Zappa style vamp. rather amazing how he could take the best musicians in the world, get them together, and sound like musical insanity while actually being some of the most complex and technical musicianship. . nice work... Unfortunately, not easily modified into what I am looking for. I have to agree with one of the other posters... Instead of just overlaying the video with a music track, a voice over would or at least some text describing what and why you are doing. Serious wood workers can easily figure it out easy enough, but average DIYers who may be looking for a project may have a harder time understanding what and why you are doing in the various steps.
very cool!!! do you have the measurements or detailed instructions anywhere?
What material did you use for the surface? Also where can you order a custom felt with a logo on it for a reasonable price?
You've inspired me, I'm getting started on this project this weekend. Do you have the dimensions?
+Paul Carreon have you found the dimensions?
@@karlkmetz8621 not yet
Still looking for the dimensions, starting to lose hope....
If you drill an 1/8 inch down with the hole saw and then drill a few small holes in the 1/8 inch swath you can give the saw dust somewhere to go and the hole saw will not bind up. Plus the hole saw will not get hot and last longer
That's bad ass! Great job man. I'm trying to decide which table to build myself.
Nice job. And love the music. Very "Scenes from a memory pt 2"
Looks good. I might have lapped the vinyl into the ends so that it was in between the gaps if possible.
what type of varnish did you use for the top part of the wood that has cups
Beautiful table!
Not only do I admire your woodworking skill, but you have impeccable taste in music, too!
Awesome build, helped alot!
Bro you’re so good at what you do. Love the table. I keep coming back to your video. Very cute table
at the table saw a push stick will prolong how long you keep your fingers, AWESOME BUILD by the way
what are the dimensions of the plywood?
Nice Jazz/Progressive song at the half of the video, name??
Nice video dude! Question whats the measurements?
where can i find the plans?
Nice job man! You have some skills.
what size plywood?
I hope those cup holders are just for show; don't let your mates drink near that fine looking table! Oh and +1 on the embedded chips, great idea!
👏👏👏 Bloody fantastic job. Also loved the second track
Really enjoyed the build and what a great end result :-) just out of curiosity why did you cut the wooden sections on the band saw then on the table saw?
Instablaster...
Impressive. Nice build.
Great job! Looks awesome!
How much do u charge for something like that because I'm interested...... 💯🚫🧢
Excelente para unas buenas manos de cartas. Excelente proyecto
Very nice. What did you do for a table base?
What filling do you use for the arms?
Very cool!
Do you have a part list for this?
I also was going to say the second track was very Dream Theater .. and then I saw it was Jordan Rudess so ... yeah!
what do you cover it with?
If you don't mind my asking, how did you make the base?
It looks like a standard octagon base, just cut your angels at 22.5 degrees on a table saw and assemble... You can adjust the height to your liking
i just started that project. building similar and better :)) thnks for the idea :)
6:03 if Pokémon and Final Fantasy had a crack baby and it grew up wrong.
Dimensions? please
screw the sheets together and mark and cut it once, theyll be congruent
Great video. The 80s scifi soundtrack at the end was unbearable though.
Pro tip, turn of the sound if you don't like to bleed from the ears!
Does anyone know a place that fixes poker tables at in Montana
Nice work.
great video! thanks for sharing)
2:33 queue the Tom Sawyer drum fill!
Came for the tutorial, stayed for the sweet soundtrack!
really sick man!
Looks good. Good job. I noticed you have a mic on your arm. Are you a musician?
Tim M. thank you! yes i play guitar and piano primarily and sing to
Awesome music,is yours....
dope video good job dude
Very well done, but WTF was that music?!
send me a video of the Melcher mint of the table slower please
Freaking amazing
Cool, man!
Love the build. I only came to the comment section to see what the haters were gonna say. Fuck em. 👍👍👍👍👍👍
Suddenly: Insectsamongus!
how do u make those gold drinks cup?
Metal, spray paint
6:46 sounds like fucking angry birds and Mario cart mixed
We want to see how you make the ( base )
By building
Difficult to imagine there is at least one straight cut…
Me passa as medidas aí mano
The foam is a little tall.
Nice but pretty sloppy on the padding wrap.
song name???
Darude-Sandstorm
Cool vid but the music....whose idea what that??? Horrific
OMG! Great video but kill that godswful music!!!
Dude, can I just give you $500 for that today.
Bye, can't take the noise
Goes through all this....decides he wants an oval table instead.
👍
ducaralho!!!! Show!!!!
I want for you to go more slower to see the Melcher mint of the table
Great table but I cant watch anymore of this video. Everytime I watch you use your band saw I was just waiting for you to cut off a finger or something. Do you not know how to use your band saw? Trust me when youve had a saw nearly cut off your hand when shit kicks back you will learn the hard way. When your using your band saw you should always bring the adjustable guard down atleast a quarter of an inch above the material you are cutting or your gonna have something kick or grab your hands and cut off a finger. And always keep your hands atleast 3 inches from the blade called the 3 inch rule.
Also if you ever plan on doing another job like this. When you do leather covering. Ive done automotive upholstery and when you roll over the leather to staple it down to your back board. You want to first start in the middle on each side of the panel, then pick one side to work with first and working from the middle outwards to the corners. Then as you move around doing the other 3 sides do the same thing. That way when you get to the corners you can tuck in any excess you have then pulling the 4 corner tabs of the leather or upholstery fabric your using over the top and staple 2 or 3 staples down the length of the folded tab before trimming it to the length of the rest you trimmed off.
This method of doing this pulls your leather nice and taught and removes any wrinkles in the material.
Your band saw was way to high for what you were cutting. Not a good thing
ok
never mind it's mask machine
How much one?
The music 😭
Is that Frank Zappa?
I immediately thought that it was similar to Zappa... The song is called Insectamongus by Jordan Rudess.... And it's glorious :D
damnnnnn dude
ta jartao de recortar madera sin pensar antes como contruirla...
What in the name of Christ is that music all about?
Nice table.
bro, that music gave me ear cancer. Nice table though
This is more like how NOT to build a poker table. So many errors, in practice, this table will be a nightmare to play on. And the looks 1/10 imo.
Stop critiquing his music. For one, the music doesn't change the build. For two, you can mute your mic. Three, I actually quite like it! but that doesn't mean we all do.
It… Uhmm.. doesn’t look good 😂
Good job but the worst music ever..
That fuckin music gets out of hand
Музыка гавно!
Thanks for the video of how NOT to built a table. Seriously, all those awesome tools and this is the best you can do? Your craftsmanship leaves much to be desired, especially that rail.
Todd Gaak what's wrong with what he did?
The upholstery looks like shit
Dont like