Adam Savage's One Day Builds: Poker Table!
ฝัง
- เผยแพร่เมื่อ 3 มี.ค. 2020
- Tested Ts, stickers, mugs and more: teespring.com/stores/adam-sav...
Adam has previously shown his replica poker chips set from the movie Rounders, and now he needs a proper poker table as well. This One Day Build is just that: a custom poker table that fits atop the circular podcast table in the cave! Making this 47-inch diameter table has Adam bringing out a bunch of power tools in the shop, cutting the wood in interesting ways to get this distinct form.
Here's the video that inspired this build, from Poker Listings: • Video
Visit the Tested storefront: teespring.com/stores/adam-sav...
Shot and edited by Gunther Kirsch
Subscribe for more videos (and click the bell for notifications): th-cam.com/users/subscription_c...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Simone Giertz / simonegiertz
Joey Fameli www.joeyfameli.com
Gunther Kirsch guntherkirsch.com
Ryan Kiser / ryan.kiser
Jen Schachter www.jenschachter.com
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Jeremy Williams / jerware
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / thebrokennerd83
Kristen Lomasney / krystynlo
Intro bumper by Abe Dieckman
Set design by Danica Johnson / saysdanica
Set build by Asa Hillis www.asahillis.com
Thanks for watching!
#AdamSavage #OneDayBuild #Tested - วิทยาศาสตร์และเทคโนโลยี
![Fc ครับ ขอแนะนำให้รู้จักกับ "น้องเปียโน" l [Nickynachat]](http://i.ytimg.com/vi/HQU6Q_IYTLo/mqdefault.jpg)
Here's the video that Adam watched, which inspired this build: th-cam.com/video/AbJrTIjvcQw/w-d-xo.html
Hi, please do you have merch of this hoodie? I really love the look
Why do you almost never have subtitles on videos :< I’m deaf and it sucks
@@gnomemercycs5578 Auto generated subtitles do not work for you?
OohzyJohnDow those are not available on this video and a lot of others, Tested only has a few videos that have auto generated subs, a shame since I really like their content
That slot you miscalculated was actually perfect. You can run a power cord through it and tape a power strip to the underside of your table now. It will have the functionally of your dinosaur head!
Making with Adam Savage:
80% “I have the perfect tool for this.”
20% hiding crimes.
So it's like backwards politics.
Nah, this time around he didn't! He suffered with his manual staple gun :P!
Everyone else:
20% “I have the perfect tool for this.”
80% hiding crimes.
Facts😂
Being a mobster confronting a stool pigeon:
50% "I got the poifect tool fa' this."
50% hiding crimes.
When you make a bigger poker table in the future, it needs to fit over the smaller poker table. Like Russian nesting dolls.
i am looking forward to the inverted pyramid of poker table nesting dolls
yo dog, i heard you like poker tables, so we put a poker table in your poker table so that you can play poker on a pokertable thats on a poker table. Talking high stakes.
Every time he adds a player he needs to add a new table. Fits 2-6 players with 4 tables.
but the new one should be oval. Bonus points if you just create a leaf to expand the current table into an oval
@@IRMacGuyver exactly what I was thinking. He could just biscuit a leaf into the middle of his existing cut, add extensions to the rail and glue glue glue!
9:43 - 10:05 Adam deciding which two friends to not invite to poker night lmao.
And that was the longest deliberation of the whole build 😅
Yeah, thats a four person table.
@@timjester8555 I was thinking 5 at most, 4 comfortably. 7 people are going to be all sitting atop each other lol.
@@timjester8555 even seems like just enough for 3
@@AllTheArtsy Late reply but yeah, that was my thought; 3 comfortably.. 4 well enough, 5 a tight squeeze.
27:31 Watching him work is like watching 3 people inside of one body. They have their own patience level, one of them wants to explain and think through everything, one of them wants to be correct, and the last one just wants to try it and stop talking. They usually do a pretty good job of keeping the body and project in check, even if they mess each other up now and then.
Very Observant
That’s ADHD lol
Lol your fired . 😢 love ya man
@raymcchristy8065 You're fired for saying "your".
10:04 "yeah, that's fine"
Translation: "Screw that. I'm not starting over"
Brinstar Media “I just won’t invite John I don’t like him that much anyway”
The disappointment in his voice when he said that was very large
Or as a friend of mine says: "You are not going to shoot or fly with it, it is ok."
They all are going to be such "close" friends.
"I bought it back when I was making TV money" tickled me more than it had a right to. Love these vids, they're so satisfying to watch a skilled craftsman apply those skills to such a variety of projects.
Adam: I can't believe I didn't measure, I'm so lazy.
Also Adam: cuts like 400 small slots into strips of plywood with a table saw, just so he can make a rim.
He isn't lazy, he's rammy and impatient.
For some reason I'm getting serious Bob Ross feelings watching your videos Adam. You're so chill and calm and "you don't need all these things, just use what you have". It's great! Thank you so much.
I think the best way to cut the edge pieces is to use a 48” hole saw bit.
I think you chuck those in a post hole auger
47"... maybe 47 1/2 if your really careful...
Sounds legit
I agree! And using a drill press.
But you end up with a big ole hole in the middle of the table
39:42 - "I realize it should be bigger, but it is what it is."
That's what I always tell em!
u r funny man take reddit gold
420 likes when I saw then. As I typed it became 421
This took me back to industrial arts class in junior high. I can just hear my teacher giving every safety lecture on every power tool as they were shown to us. I of course listened and never had a mishap but can remember others having cuts and bruises from poor tool usage. Thankfully though,, no one lost fingers. My favorite projects that I made were a sheet steel dust pan that I gifted my mom and a cork board and chalk board message center for use by the phone. I also have a plexiglass key chain I made and key ring holder. Sadly in high school they would not allow me to take building trades. They refused to let girls in the class citing safety issues. I learned cement, plumbing, basic electric, roofing, and construction from my grandpa building hunting hunting cabins. I also learned car care from my dad and grandpa when learning to drive. I still do almost all of my own work alongside my husband. Thanks for the good memory reminders.
The small table size reminds me of the one from the Star Trek:TNG finale. It's not small, just compact for shipboard living!
Make the "thing" on the edge stick out rather than sit on top of the table. You know the thing? There, problem solved. Extra foot of diameter.
"I bought it back when I was making TV money"
Easily one of my favourite Adam quotes.
Now he's making TH-cam money, which based on his Subs is probably pretty close.
Curtis Gibb - Nowhere near as close. The more TV he made the paychecks rose.
I reject your reality and substitute my own
@@modalen2 perfect answer
@@curtisgibb3635 It's probably not the same but then again who watches TV anymore?
I feel like I'm a kid watching my dad work on the house and I'm holding his tools.
Except im not being yelled at
and there's no alcohol
and nobody is naked
And my dad didn’t leave to get milk 14 years ago
The first three replies are fucking gold
Suddenly I'm back in our garage as an 8 year old watching my father make stuff. Thank you, Adam. You've reinvigorated my passion for learning.
I love how clearly excited and into the builds he is
"I bought it back when I was making TV money" was one of the most real things i have heard someone on youtube say in ages - i felt that comment to the bone!
+
Just once I want to see a show called "Adam takes his time"
Ah, and its Sequel Adam does his taxes.
And the prequel, Adam cleans his cave.
One Week Builds
Ask his sister.
It couldn't also then be a "One day build."
I love that you don't hide your mistakes like so many on TH-cam do
I think my favorite thing about Adam is how cheerful he is even about mistakes like not measuring the curfing
Adam: this is how small my shop is. Also Adam: takes up half his shop with replica space suits and pool tables.
I love how honest he is. "You don't really need one of these but I bought it back when I was making TV money."
A electric bread knife is essentially the same tool without a base...$20.00
@@andykenyon2699 - I've destroyed a bread knife on ONE home foam job in the past. The bread/carving knives don't have the end support, and all the stress is transferred to the pivot points of the blades. That $20 knife won't hold up to any appreciable stress. Carving 4" foam is nearly instant death for them. Even 2" is really hard on them.
They're good to have around, but don't count on them lasting long.
Aka invoiced through Jamie's shop...
@@TheTalonts well if the bread knife will only last one project and the actual tool will last bust costs ~350 i guess the question is are you going to do more than 17 projects that need it because otherwise its time to buy 17 electric bread knives :)
@@kingofgar101 - Of course. That's the calculation you should use for EVERY tool. I rarely follow that advice myself, though :-/
This guy's excitement for what he does is just so contagious
Love watching Adam build stuff. 1 it make me want to build things. 2 I explain just as he does even if there is no one in the room.
“I bought it back when I was making tv money”
😂😂
Time stamp?
@@GoldAk47 32:36
"TV money" it's the definition of nostalgia of mythbusters
How did you end up in a small shop with a camera man that can't hover around getting good shots?
I feel like he truly is broke now ho estly my feelings
Me watching Adam work: Hes so efficient in the way he works. Also me: Hes violating almost every single safety speech and best practice ive ever leaned in a shop basically every time he picks up a tool. lol
Adam: I have one day to make this
Also Adam: Makes the most overengineered, labor intensive masterpiece of a custom modular poker table featuring 1000 kerfs
Brilliant. Couldn’t stop watching. It’s cathartic. Couldn’t even skip through it. Beautiful work Mr Adam.
Adam Savage is TOP of my List when it comes to "Worst Pokerfaces of this Century" I can just imagine him cheering up in childlike joy when he is given a full house :D
And then you realize that after a decade+ on the TV he can act like the best of them.
Exuberance =/= bad a poker.
@@Vladimir_Kv I don´t think Adam is acting. He is very natural and honest, that´s what i like a lot about him. I don´t want to believe that his joy in builing and creating and his curiosity towards new stuff is acted.
@@antraxxslingshots I didn't say he was acting. What I WAS saying is that he has enough acting experience to win in poker thus your initial statement comes out as pretty shallow.
@@Vladimir_Kv From what do you think i think he would gain acting experience if i am sure he does never act? Why so offensive anyway? Have a nice day dude.
@@Vladimir_Kv wow, chill out, someone disagreeing with you politely doesn't require such an aggressive response.
He looked so dissapointed when he realized that it was only big enough for 6 people and not 7, it breaks my heart
How many people you think he told the poker party is cancelled??
1 Like = 1 Prayer
@@JustinDrentlaw get that shit out of here and fish for likes somewhere else. sad.
@@alexn78666 Lmao clearly somebody does not have a sense of humor. And not that it matters at all but I'm actually an atheist.
@@JustinDrentlaw it doesn't matter at all, so why the fuck did you say it. Classic internet atheist 🤦
Such a happy guy. So cool to see him still creating.
I love this guy, his thinking, his personality and his abilities... Watching him piece things together is just magical
When Adam Savage says "I'm so lazy" part of me is like, "oh my god if that's lazy than what am I?" but another, better part of me says "See? If Adam Savage feels lazy sometimes but he's really not, then maybe when you're beating yourself up for being lazy you're being unfair to yourself. Give yourself a break, you're okay."
Top quality comment good sir.
Or you're just lazy.
No, sir you're what's called neurotic. Join the club.
Adam Savage, pointing to fingers: "These are very important to you."
Also Adam Savage: Inadvertently showing off bandaged finger from some kind of shop accident.
and that black fuckin' nail... Lol!
Yeah, that's a little serious bruise and bandage. Wonder what happened?
@@Senacharim that's a standard week in a shop. No minor injuries means your not working hard enough.
@@gsmarchand Then theres me. The person that works on foam cosplays in my shop. I don't have any hand injurys other than a few cuts from my shop knife.
@@Senacharim he got his hand caught in the gear box of the metal lathe after he stripped and fixed it. Treated himself with a stupid number of butterfly closures to avoid hospital. Apparently healing well which is GOOD.
These builds make my days so much better.
I’m a carpenter and been enjoying this channel. Never knew how talented you are from mythbusters. I liked mythbusters, but this is my cup of tea. Carpenter, machinist, etc, etc, you do it all!
"They seek out human flesh and, once they've tasted blood, it's all over." I laughed so hard that I started coughing. Thank you for that quote.
It's truly a tragedy when you have have your favourite nailer/stapler put down because it's developed a taste for human flesh.
Same is true for rose bushes. Beware.
"I bought a pneumatic stapler, but it's not here yet." So this was made *before* the dino lamp, huh? Interesting.
The GentlemanPirate Yes, because he says that he’s doing this before his friends come into town for Sketchfest, which was back in January.
Just bought the Milwaukee 12v T50 stapler highly recommended.
Michael Kimmerly lol 😂 no one cares !
dino lamp is over pool table so not see connection here.
@@rodney73991 he used the pneumatic stapler in that.
Watching Adam built is like watching Bob ross paint
Its so fun to see the creative process of a true master!
I really like how Adam is approaching his projects as beings that "want" to be a certain way, not things that "have" to be something. Its a big part of how charmful his works are, I think.
24:30 - Adam talks about safety while using a nail gun.
20:13 - Adam rotates the nail gun, 360, right in front of his face.
me: **starts sweating excessively**
Tansel this whole part made me so nervous
@@wolly2516 i remember reading about nail gun injuries, like the one happened in Littleton, Colorado in 2005. Construction worker goes to the dentist because of toothache where he learns that he got a 4-Inch nail stuck in his head.
Those nailers actually have a little tongue that has to be depressed before they will fire. People usually hurt themselves when they rest the gun against their leg, or when they're trying to nail a particularly tricky joint.
I've worked with nailer in furniture manufacturing.
Most have a little contact safety that if they are not depressed against something will not fire. (only two on myself) I used one 7 hours a day for a couple years.
I've literally seen hundreds of injuries to them and staple guns.
You have got to be way more inattentive or have disengaged the safety feature to get hurt.
The only really bad injuries are if the nail/staple bends when it punches through the bone, hits a vein/artery, or a big nerve.
The rest just sting and bleed.
while standing under the sign saying to use proper eye protection
25:50 he gives serous advice and yet he delivers it creatively, humorously, and better than most of my teachers and I enjoy it!
Love the madness of being a genuine maker.
The biscuit joiner reminds me of those connector pieces for hot-wheels tracks
Re: "all my wood is 24*48” - just putting it out there that I'd love to see a "how I store my raw materials" video 🙂 I love the tool stands and the sortimo box videos but don't think I've seen any on some of the other awkward ones like sheet/board materials and fabric... Mine always end up in awkward stacks and bundles 'cos I have no idea where to even start categorising them 😳
Generally though, thanks for all the how-to's, always get excited when I get a Tested notification 🙂
Right? The storage is half the hassle, and once you have that planned, you can make a lot more stuff because you can -find- the things you need to make it. I would be super interested in a tour of the storage, too.
@@llearch yup!! And I'm virtually phobic of cutting wood to fit just in case the next project wants a size up 😅
I had a leftover ten-foot oak plank from a decorating job a couple of weeks ago, and honestly it's embarrassing how long I stood trying to decide whether I should cut it into two matched 5' planks or one as long as I could fit in the rack and one stubby leftover 😝 it's tragic but the struggle is real...
iam toast shop logistics, how does he order the ply and other materials would also be cool
This is an awesome idea!
This is AMAZING!!! I am deeply thankful for you sharing this!
I love how quiet these videos are.
So satisfying!
A piece of advice when working with vinyl, especially on round surfaces: use a heat gun or hairdryer to warm the vinyl and make it stretch more.
"It's difficult to build a 4' tabletop in a shop this size"
*Colinfurze laughs in Landspeeder*
hydraulic Scew tank
The firework death star
Hulk buster
xRobots laughs in Hulk Buster and fully functioning Ultron in the attic
This is totally Adams true element. Stars aligned for this guy and we're all grateful for it.
Thank you so much Adam, I truly appreciate this! I've learned soooooo much in this video
Adam- "Please excuse the Crudeness of this table its.....
Every Back2TheFuture Fan- "Yeah I know doc Its not to Scale"
Joshua Z “Great Scott”
5:42 I can feel that router going "...that's some thick plywood there buddy. How about we do it in 2 passes? Adam...? Bud...?"
EXACTLY! :-)
And then he decides to go backward and my stomach just distorted for some reason... oh, yeah, wrong way = accident-in-the-making, that's why :p
I'm so glad I wasn't the first to notice this. Hearing that router groan every time he put his weight behind it...........it may just give me nightmares. lol
I thought that too!
@@flyingman09101984 front the sound of it though, it sounded like his original pass was in the wrong direction for the rotation, but I guess that could have been how hard is router was working
I could get past him not wearing any hearing or respiratory protection! I assume his glasses are safety glasses but who knows if he’s not even wearing a mask!
25:58 After the _nail-gun_ lecture this line sounded a lot like "I think the next stab..."
I love coming back here after months in the shop with Adam only to realise that rickety workbench he's climbing all over is the same one he fixed later in the year 😂 #StuntmanSavage
Adam, having just finished using an angle grinder without a guard or handle: "I have another safety tip for you!"
Do what I say,not as I do.
@@it3897 that's ALWAYS struck me about him.
This is exactly what my woodworking teacher in school would do haha, broke almost every safety rule in the book while telling us not to do that
@@Zebra.Lionfish i personally try to lead by counterexample
He will do that until the first wheel shatters and he has the pieces removed from his face
Thanks for the tip at 15:30 on how to clamp parallel surfaces. This will come in super handy.
17:57
Close your eyes
This is so nice and relaxing to watch Adam build things i just love it.
36:47 who cringed when he was slicing over his other piece?
The blade hovering just milimeters over the felt... :P
This!
Exactly this. This would go so wrong if it was my project. On the last or second to last cut, I would also cut the freshly build table.
/me raises his hand. Man, I was thinking "oh, please don't damage that nice felt surface. Please!" the whole time, including when he was putting tools down on it.
I was literally yelling at him through my computer screen. AND THEN HE PUT A STAPLEGUN RIGHT ON THE FELT!!!! Almost had a coronary.
Adam: Hammering in the final kerfed piece.
My brain: LIKE A GLOOOOOVE
That foam cutting tool brings back memories of working for $2/hour as an upholsterer's helper (yeah, it was the mid-70's). Once customer came in wanting new foam for some seat cushions, and the master just handed me the tool, and pointed out where the new foam was. I traced out the new against the old pieces, and cut out new pieces while he waited.
I enjoyed watching the build, but yeah, you need a bigger table so you can fit the full nine around the table. Shuffle up and deal! :) Thanks Adam.
36:35 - WHY WOULD YOU CUT ON THE FELT TABLE OH MY GOD.
Gave me anxiety, ngl.
For sure biting my nails! Haha
Definition of irony: Adam Savage having a Wear Saftey Glasses sign in his shop.
Gotta have proof of health and safety code don't mean ya have to follow it
Hasn't he mentioned at some point that he has polycarbonate lenses in his glass or am thinking of someone else?
@@oliverer3 maybe, but I'm not seeing any side sheilds, and they are required.
He does it to be.... savage 😎
Even so, he’s also not wearing hearing protection or a mask
"We're gonna hide a lot of crimes with the cloth" -Catholic Church
You deserve some sort of award for your glorious comedic efforts
oberreden it’s called a like.
Something which I will not give
I thought the same thing. Bravo sir. The internet does not disappoint.
@@Volt64bolt Why, they aren't wrong.
I like how you explain something you're about to do (probably honestly and genuinely to the best of your ability) before you do it, but it's just vague enough that I still have to figure it out as you do it.
Love the video, keep em coming, I’ve learned small tips from your builds in the past few months that I use now, wish I had a fraction of of the shop you have
Adams miscalculations make the rest of us feel human.
"I'm so lazy."
Best moment.
They use torx head screws because less cam out and stripping of the screw head. Also you can get more Torque on it then a Philips screw when fastening.
This was genuinely so nice to watch!
ICYMI, here's the show and tell of the Rounders poker chip and case replica! th-cam.com/video/GtarhjRLx30/w-d-xo.html
When you guys get around to to it, do you mind linking the cheap poker table video Adam mentioned?
Didn't you want to link your inspiration video ;)?
Yes, where's the inspiration link?!
I wonder if Jamie secretly watches this show 🤔
Think he was on about this one th-cam.com/video/AbJrTIjvcQw/w-d-xo.html
Adam Savage: Solving world peace by hiding crimes with a cloth.
I was kinda thinking, world peace might very well be possible to solve over a game of poker ;P
How Adam solves world peace: "hiding the crimes."
Never would have thought of making a Jig like that for cutting a radius!!! Thanks for the idea!!!
DOWEL, DOWEL! I knew something Adam didn't. That's it. Life goal achieved.
26:20 “I was pretty sure from the measurements that was going to work but.... you never know” 😂😂 these words can’t be any more true
I so want a montage video of all of Adam's shop saftey tips. They are universally helpful.
Seeing that wood bend made me so happy
"i bought it back when i was making tv money" lmaoooo I love you, youve been apart of my childhood and now adulthood! thank you!
Me: Adam, Where is your ear protection?
Adam: WHAT?? LOUDER! I CAN’T HEAR YOU!
do you have to wear ear protection then you are wearing hearing aids?
@@nudl3Zz Depends! If the noise minus the hearing loss is still above 83-86dBA, get yourself some protection. (am audiologist)
Reminds me of how he seems to always weld without gloves. Skin cancer is a thing lol
@@nudl3Zz You can still damage your ears even when using hearing aids. Hearing aids make so your hearing range is larger, but doesn't stop the pressure wave from damaging it. Think of it like this. With hearing loss, it would be like you wearing a bunch of thick clothing and some one pokes you with a finger. You're able to feel the prod, but you would have a harder time making out the exact point they poked you vs your bare skin. A loud enough sound to damage your ears would be like a punch (in this analogy, the clothing wouldn't be able to soften the blow, unless you were wearing clothing designed to soften it, e.g. earplugs).
Another way of thinking it, is if you look at a sound save like a sine wave. Frequency is your hearing range and is usually measured in hertz (1 cycle/s = 1 Hz). Amplitude is how tall the waves get when you change the volume and is measured in decibels (dBA). Amplitude is the energy of the pressure wave and is the primary concern for hearing protection.
I may be incorrect but I think in the video where he talks about his hearing aids they actually have a noise canceling function that he can kick in via his phone so that might be the case.
That work bench/table at the beginning was so wobbly... I was sure it would collapse underneath him.
That was the effect they were going for. Hence the camera angle that was chosen for that shot. Looks like it worked!
When I was a kid I use to think my dad was boring and wasting his days in his carpentry shed, but now I'm older.........my patience has grown so much for this fine level of work, and I appreciate it more. I now see what my dad saw and it was me who was wasting time. ❤❤❤
Watching adam realize it's a tight 6 person table when he hoped it was a 7 person, Something I've done before, before building it, draw it up in sketchup, then use a program like VRSketch to test out the table, sitting at it, etc. I did this recently when buiding a custom table for DND that had an inside and desk trays for each person. Worked great to let someone sit at it and test it out to request changes before I even put metal to wood.
That was the first thing I noticed - I'm like this will be squishy
It will be easy to look at your neighbors’ cards 👀
It was the "this is fine moment" where I thought no its not but keep on pretending. It hurt to watch.
I'd love to see the custom DnD table you made..I'm desperately looking for inspiration.
@@x9x9x9x9x9 You could see the gear's turning in his head. If he'd had more time, no question he would've scrapped it and started again.
"You really don't need this... I bought this when I was making TV money"
I’ve been watching these out of order. I’m SO glad he fixed that wobbly work bench.
you are a builder my man, love to watch you figure, plan, attack, measure, plan, attack.
He’s always building as if his buddies are 5 minutes away.
"That was exhausting"
The the realization that he has to do it all again :(
And then he starts slicing and dicing right on top of his nice felt like it's a common workbench. He's so lucky he didn't cut a slit in it. He was too tired to notice the danger.
“Biscuit joiner” this is why I love these videos I always learn something new!! Especially when I least expect it!!!
Swapping out the Torx bits for Phillips Head is a move I've never considered and can't wait to use.
I also didn't know how to cut a circle until today, that guide is awesome.
You could use a 47" diameter hole saw and a 37" Foerster bit for that padded ring next time.
/s
Get a good vacuum cleaner for dust extraction!
It will make everything better. The router will cut better without being drowned in wood chips.
AND you will breathe less dust into your lungs...
Are there any industrial roombas for woodworking shops? 😂
@@tadasskeltys I'm pretty sure I've actually seen one made by makita
@@tadasskeltys Well, if anyone in the robot making world. Has yet not done it. They are slacking hard. There is clearly a market!
Or at the very least a respirator
Festo makes good tool vacuum cleaners.
I was marveling at how much space you have in your shop right when you started talking about how small it is.
Hello! this is your friendly neighborhood carpenter! While there are many ways to cut circles, (there's really nothing wrong with yours because you know what you're doing) but these are the ways I would recommend to anyone without a large amount of experience. first, if you want to stick with a full depth router cut, draw your circle, cut it out with a jig saw (leaving no more than half the router bit thickness) than use your circle jig. this way you would be able to cut the entire circumference without backtracking, it would cut down on chatter, and is typically "safer". The second way, if you only want one set up, is to just like you did it, but take 1/4" depth /pass. (the router bit radius) this should still eliminate the backtracking and the majority of the chatter. method number three, and probably the quickest by far is a circle jig for a band saw. at least for the table surface.
Love watching you work and I hope this comment is helpful!
"Every tool's a murder weapon when you know how to hide crimes"
25:32 THIS! I tell my kids in class as part of their introduction to the nail gun. I've seen nails do some incredible acrobatics.
The machines are so hypnotic they can zone you out and injure you, he says. Very good point because I was zoning out listening to the machines. It’s like a rocking crib
A fantastic job, congratulations.
When Adam goes: this is a six person table it looked like more of a 3 person table to me :D
And oh my god i freak out seeing him working with the router without a mask and his hoodie laces all dangling down.
in the first 30 seconds of the video when he said the dimensions I thought "WAY to small for poker"
Jumping on the table and off x 2... Don't try that at home