What size lift do you have on your truck and what name brand tires are those and how much trim and did you have to do? I’m wanting to do 26 x14 And 37’s
I skipped to the end to see what it looked like.. And lemme tell ya it looks fuckin killer.. But if that trans is stock then he gonna smoke it with those wheels. But im partial to diesels so i may be a bit biased. Either way 26s with 37s is the move.. (The more i think about it.. If he cammed this truck im sure the trans is upgraded too)
Man that truck sounds insane. Love the lope and your new shoes and wheels setup. I’m wondering if my 5.7 Hemi could sound like this? How do you get the lopey idle? Thanks
@@skylinezz4482 3.73 gears and power is good with the LS3 if it was a 5.3 I would advise 4.10s on 37s. If ya ran 35s/33s and 4.10s it would be a beast. lol
@@mikeyjohnson1696 no I didn’t mess with the rear but I’ve had to replace the rear U joint on the driveshaft 3 times not sure what causes that issue guessing the lift putting the driveshaft at a different angle
I actually perfect using microfibers but I had taped the machine but either way they didn’t get scratched. Been doing wheels and tires for only 9 years so I guess I’m a dummy lol
@@hhutsonn7251 so no aftermarket exhaust pipes? Do you have any issues with the check engine light at all? I put headers on my BMW and removed the cats, every other month I’m dealing with the check engine light.
What size lift do you have on your truck and what name brand tires are those and how much trim and did you have to do? I’m wanting to do 26 x14 And 37’s
This one of the coolest videos I ever seen , I felt the purity. I enjoyed you enjoying the truck such a dream
What cam do u have and what are the specs? That beauty sounds like a monster!
compcams. It was one of the larger lift cams they have but still mid powerband from 3k rpm up
Just sub'd damn she is sweet...I have 08 with 7.5 Rc with 35's..but yours sounds insane...love that cam setup...good luck sir
Thanks bro!!
Are the wheels on backwards? They look directional.
Update on the truck
What all engine mods did you do? This thing sounds fkn great!!!!!!
Looks good. What gearing is your truck
3.73 as of now it does well at 65MPH on the 37s
What kind of fucking exhaust is that!?!?!?) 🥵🥵🥵🥵🥵🥵🥵🥵🥵🥵🥵
What kind of exhaust
I skipped to the end to see what it looked like.. And lemme tell ya it looks fuckin killer.. But if that trans is stock then he gonna smoke it with those wheels. But im partial to diesels so i may be a bit biased. Either way 26s with 37s is the move.. (The more i think about it.. If he cammed this truck im sure the trans is upgraded too)
Yes it’s fully built 4L65E with a circle D stall
Im happy for you I love those wheels I love the set up it’s a sick truck 👍 👍 👍 I have a truck like that and I want some wheels like that.
What’s the name of these rims?
What kinda exhaust you have that truck sounds amazing
It’s Gibson headers into a x-pipe then out the back
👍👍👍👍👍
Man that truck sounds insane. Love the lope and your new shoes and wheels setup. I’m wondering if my 5.7 Hemi could sound like this? How do you get the lopey idle? Thanks
Aftermarket cam
Yes it has a Comp Cams cam in it.
@@hhutsonn7251what cam and exhaust are you running😮😮😮
What exhaust are you running ? Sounds great
Truck looks and sounds great man!
Thanks 👍
MINE JUST LIKE YOURS. SAME REACTION LOL
Happy for you brother! Enjoy the fruits of your labor!!!
Love the content I can see this channel blowing up in the future , you are living my dream 👍
Looks good exhaust would drive me nuts to loud
What all you have done to make it sound like that
I’m not an exhaust guy but that’s the meanest sounding gas burner I’ve ever heard.. Dauuum
Thanks man
What’s the exhaust setup?
Damn that truck sounds Good!!!!
Is this a 2WD ? And if so have you had any problems with that setup of wheels
What size lift kit ??
Looks amazing!!! Congrats !
How do you like that brand machine…mount and balancer
Do you have a instagram
Is it a 5.3?
LS3 swapped
💪🏽💪🏽💪🏽💪🏽👍yep
What size lift is that on
Very Cool!
Exaust and engine work
Do you have a 6.2 or 5.3? And other then the headers, is it straight piped?
6.2l LS3 headers into x pipe then out the back
@@hhutsonn7251 were u running stock gears if so how was power n gas mileage
@@skylinezz4482 3.73 gears and power is good with the LS3 if it was a 5.3 I would advise 4.10s on 37s. If ya ran 35s/33s and 4.10s it would be a beast. lol
What did the whole setup cost you?
Alot more than i wanted lol still doing more
What taillights you got? And from where?
Recon Smoked black tail lights, there are 2 variants of these and these are the ones that will pull up at bottom of page on there website.
🙏🙏
Looks great man does it rub what size lift u running I’m on a 7.5 rough country and 1.5 level running a 22x14 on 37s rubs like crazy
It looks like a mcgaughys and he said it’s leaning a bit so I would assume he has it set at 9
Its stretched to 10" but I dont turn full lock and have no issues, no trimming on cab side whatsoever
Oh I want to go with a bigger wheel
Did u have to mess with the rear driveshaft with the 7.5 lift?
@@mikeyjohnson1696 no I didn’t mess with the rear but I’ve had to replace the rear U joint on the driveshaft 3 times not sure what causes that issue guessing the lift putting the driveshaft at a different angle
What kinda wheels are those namebrand?
damnnnnn those look tuff
bro this thing is nasty!!
I'm thinking about buying AMP MT 37s how do they ride? Smooth? Any noise?
They ride great and noise isn’t bad at all.
One day my truck will be like this just need to keep grindin
Keep it up you got this 💪🏻
What brand wheels are these
Hey, How did you get your exhaust to sound like that? It sound possessed even an idol! Please tell me what you did so I can do the same🙏🏽
Headers, cam, X pipe out to the rear.
Cam specs??
Very relaxing to watch😎 those rims are nice!!
How big is the lift
26x12 or 26x14?
Dalton
U have put red towel on clamp so I don’t scratch wheels
I actually perfect using microfibers but I had taped the machine but either way they didn’t get scratched. Been doing wheels and tires for only 9 years so I guess I’m a dummy lol
What tires bro ? Those look good
What size lift
Looks great 🍿 music to my ears 👂 🔥👍🏼😎
What rims are those
What’s the lift and tire setup
Rim and tire setup ?
Pretty truck
💙💜🧡😭😭😭
What exhaust do you have? Also do you have a cam?
Headers, cam, X pipe out to the rear, Yes it has a Comp Cams Cam in it.
I’m local, who did you cam install?
HHP or LMR of Houston will take care of you.
Loping !!! 🙌🏿🙌🏿🙌🏿
Dope
🥶
Lift size ?
10.5" its stretched with uppers
Beautiful.... what did you use for it to sound like that.. beast!!!!!
LS3 cammed with Gibson headers and xpipe no cats then out to rear duals
@@hhutsonn7251 so no aftermarket exhaust pipes? Do you have any issues with the check engine light at all? I put headers on my BMW and removed the cats, every other month I’m dealing with the check engine light.
What stance is that?
14 wides with 2” spacers
What size lift?
10.5" of lift in this video
Hey what year is it?
It’s 2024!
What do you have as exhaust and engine mods
Gibson shorty headers & 2.5" exhaust into xpipe then out back
@@hhutsonn7251 6.2 or 5.3?
What tire are those?
AMP M/T 37x13.50x26
@@hhutsonn7251 what rims or those
Looks great man, I love the setup
Thanks!
instablaster.
Time to re gear the differential
not my style but congrats
No running boards????
White boy too slow mount those tires
how do I get my 01 Tahoe to sound like that plzzzz help.... truck looks wicked
LS3 Swap, Headers, cam, X pipe
What’s the exhaust called
What you do to make it sound like that
LS3 swapped, Headers, cam, X pipe out to the rear.