Smallest Camera Module based on ESP32 S3 | XIAO ESP32S3 Sense
ฝัง
- เผยแพร่เมื่อ 19 มิ.ย. 2024
- This video is about the latest development board from Seeed Studio called as XIAO ESP32 S3 chipset. This is the smallest development board with builtin
- Camera Module
- Microphone
- SD Card slot
- Battery Charging circuit
&
lot more....
Watch out the video to know everything about this board.
To try out free trial version of Altium, click here - www.altium.com/yt/techiesms
Get the best quality components from Octopart:
octopart.com/
You can support me🙏🏻 and also get benefitted on Patreon :- / techiesms
__________________________________________________________
👨🏻💻 Important Links 👨🏻💻
ESP32 Boards Package Link ( Click on the link, it will open in web browser and copy the link from address bar ) - raw.githubusercontent.com/esp...
XIAO ESP32 S3 Github repo - github.com/limengdu/SeeedStud...
XIAO ESP32 S3 Microphone Article - wiki.seeedstudio.com/xiao_esp...
XIAO ESP32 S3 Sense Board (From Our Store) -techiesms.com/product/seeed-s...
__________________________________________________________
Buy the components for your projects and support techiesms💡🔌
ESP32 Dev board - techiesms.com/product/esp32-d...
HiLink 5M05 (5V 1A) - techiesms.com/product/hi-link...
__________________________________________________________
⏱ Time Stamps ⏱
00:00 Introduction
00:17 Agenda
01:58 Unboxing
02:30 Specifications of ESP32 S3 Chip
02:54 Specifications of XIAO ESP32 S3 Sense board
04:44 Configuring XIAO ESP32 S3 with Arduino IDE
05:36 Uploading Sample Sketch on XIAO ESP32 S3 board
06:41 Testing Camera Module
09:37 Taking Pictures and Storing in SD Card
11:38 Taking Videos and Storing in SD Card
13:52 Recording Audio and Storing in SD Card
15:56 Testing Rainmaker & Blynk on this board
16:37 Testing Battery on XIAO ESP32 S3
17:26 An interesting application using XIAO S3 Sense board
17:50 Share your thoughts on this...
__________________________________________________________
🎥 🎙 My Video Gear 🎙🎥
Camera - Canon 750d
Lens - 50mm f/1.8 STM Lens (amzn.to/32gqnsi), 24mm f/2.6
Key Light - Godox SL60W (amzn.to/3522mHe)
Fill Light/Back Light - Osaka Lightning Setup (amzn.to/2I5cdDi)
Tripod - amzn.to/3uNhC4H
Microphone - Zoom H1N(amzn.to/3Osh12A)
Editing - Final Cut Pro X on MacBook Pro ( amzn.to/3vHcSyJ )
__________________________________________________________
Get connected with techiesms everywhere..
Subscribe Main Channel :- bit.ly/techiesms_youtube
Subscribe Shorts Channel :- bit.ly/techiesms_shorts
Facebook :- / techiesms
Twitter :- / imtechiesms
Instagram :- / techiesms
Website :- www.techiesms.com
Telegram - @techiesms
__________________________________________________________
techiesms
explore | learn | share
#ESP32S3 - วิทยาศาสตร์และเทคโนโลยี
cant wait to see future projects on this board
make some real life usable projects
thanks bro! Terrific vid
Thank you. This kit is amazing
Glad you like it!
Thanks ... now I will purchase one and make a doorbell.
thanks for the tutorial as the documentation has been confusing to me 😊
Great tutorial. I just got this board and I was wondering, is there a way to record a video with the audio? To have the sound and video on the same file
Maybe record video and audio separately but at the same time. Then use some software to merge video and audio together.
I only have ESP32 Cam. Please let me know if it works. I will buy Xiao Cam too if it works.
Hello techiesms, thanks for the video. Could I know if the camera can works without being plugged? Many thanks and regards
Yes, i really wait for you to make tiny robot like this ending video clip. I hope next Sunday I saw this robot and I also make this robot by giving your guidance.
Not on next Sunday but in future
what spec battery you use ? Is there a maximum battery specification that can be used?
Thanks indeed
Is it possible to use all those examples with PIO in VSCode too?
Great tutorial! Any idea how to cable connect two of the cam units with a third non-cam board for stereovision processing? Also, what is max fps of the cam boards?
Not sure about this
@@techiesms thanks for taking the time to reply, tho. 🙏
hey i have your home automation project v1.0...which was earlier built to work with blynk..can we use the same to work with cadio?
care to give the link for the shown video at the end(tiny robot)?
Is this stream via Soft Access Point mode? if so can you share the set up :)
is it work with ps3 controller bluetooth? cuz im had failed to compile when using esp32 s3, but work perfectly when using standard esp32 dev kit 1 module
Yes we want project using these microcontroller
where did u get the tank from!!
Could this module be used to stream audio or video efficiently?
Hello...Can we use this With CADIO platform ?
If then make a video on that
Please make a video using vc 02 offline voice recognition module (avilable in robu)
You could show how to record video with audio. Thanks
Downside of this board i see is it has a big antenna which is not possible to hide and it gets heated a lot ,so like adding heatsink wil increase its over all size so does that make sense ,and if battery is placed behind the board ,which everyone will probably do ,it will tch fire due to high temperature
From what i was reading the camera also gets hot, so if you get a longer ribbon cable you cam make a sink for that too i bet if you get the little heat sinks for the Raspberry pi 4 that could be more that capable of heat distrobution
can u share link to the tank robot?
Please try sparkfun person sensor module
any I2s Ble audio stream. Please build ahead of exisiting BRO. It will be great for us
try tinyml on edge impulse and create a speech recognition system
Hi from Iran
This video was very useful
i have a question
Can I solder 1200 mAH 3.7v battery on xiao ESP32S3 module?!
Yes
Can we make dashcam for car or bike?
Can XIAO ESP32S3 be connected to an audio amplifier?
very nice video but How to use this camera with sim card for global live feed
It will be very useful enginnering college projects Please publish some real life projects .
Sure, do share some suggestions if you have
can you suggest any usb camera module with autofocus to detect text using raspberry pi
Not sure about this
If i want to detect the car or people then what i can do?
Hey can you make remote controlled car, control through Bluetooth
I wonder if someone will respond. Up until the camera server code upload. Things were working fine. Then since, I'm getting A fatal error occurred: No serial data received. Failed uploading: uploading error: exit status 2" error
Please Sir is there a way to use the esp rainmaker under local network. With due respect please help us to be able to achieve local control of esp rainmaker through its application. Thanks indeed
Brother is it worth doing btech in iiot
What are the placement scope
If u know pls reply
Actually we use those push buttons in our smartpone button keys
for flipper0?
I bought the ESP32 old version 3yrs ago not tech savy did all instructions exactly and still did not managed to make it work...😢😢😢
You can enter the code for the camera connected to the battery? plissssssssssssss🥺🥺
Sir I want to pursue btech in iiot, will it be worth it regarding placement
Placement is not dependent of degree, it's totally dependent on your skills. So go for IIOT, it's a good field but make sure you develop your skills daily
Can we like use this board to make a keyboard
Bluetooth Keyboard you can make
We are still waiting for a microphone to be added to project Running ChatGPT on ESP32 with Audio Output 😟
July 2023
@@techiesms Looking forward to it 😶
Please as soon as possible
i Am thinking of making a tiny submarine so that i can dive into my aquarium
1500₹ ,is it worth what do you think?
Nah
❤ly
1st
It's 2023, let it go lol
Thanks for watching before everyone else 😇
Its bigger than your thumbnail
I get
Arduino: 1.8.19 (Mac OS X), Board: "XIAO_ESP32S3, Disabled, Disabled, QIO 80MHz, 8MB (64Mb), Core 1, Core 1, Hardware CDC and JTAG, Enabled, Disabled, Disabled, UART0 / Hardware CDC, Default with spiffs (3MB APP/1.5MB SPIFFS), 240MHz (WiFi), 921600, None, Disabled"
xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools), missing xcrun at: /Library/Developer/CommandLineTools/usr/bin/xcrun
exit status 1
Fehler beim Kompilieren für das Board XIAO_ESP32S3.
Dieser Bericht wäre detaillierter, wenn die Option
"Ausführliche Ausgabe während der Kompilierung"
in Datei -> Voreinstellungen aktiviert wäre.
What is wrong?