How to Replace Right Rear CV Axle Assembly 2008-2017 Buick Enclave

Buy Now!
New CV Axle Assembly from 1AAuto.com trq.video/ia-1...
New Wheel Bearing & Hub Assembly from 1AAuto.com trq.video/ic-1...
New Wheel Bearing & Hub Assembly Set from 1AAuto.com trq.video/ia-1...
New Wheel Bearing & Hub Assembly Set from 1AAuto.com trq.video/ia-1...
This video shows you how to install a new right rear CV axle assembly from TRQ on your 2008-2017 Buick Enclave. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This repair was done on a 2014 Buick Enclave Premium 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 Buick Enclave
2009 Buick Enclave
2010 Buick Enclave
2011 Buick Enclave
2012 Buick Enclave
2013 Buick Enclave
2014 Buick Enclave
2015 Buick Enclave
2016 Buick Enclave
2017 Buick Enclave
Tools you will need:
• Pry Bar trq.video/o8K-...
• 10mm Wrench trq.video/oacC...
• 10mm Socket trq.video/obGx...
• 18mm Socket
• 21mm Socket
• 22mm Socket trq.video/or7-...
• 34mm Socket trq.video/oY-1...
• Dead Blow Hammer
• T30 Bit
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet trq.video/obGx...
• 3/8 Inch Drive Ratchet trq.video/ob6T...
• Torque Wrench trq.video/obaQ...
• Gloves trq.video/oa4R...
• Safety Glasses
• Drain Pan
• Floor Jack trq.video/oawY...
• Jack Stands trq.video/oaiZ...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Buick Enclave 1st Generation 2008-17: • Buick Enclave 1st Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.