How did I not find this youtube channel till now, woah!!!!! I love the content as well as maintain standard procedures of modeling example: Using POINT, LINE, PLANE for skecth reference and maintaining tree in a good way keeping sketches separate in geometric set and body separate set for pad
Thank you Wolfgang for sharing your knowledge with us! His videos are a source of inspiration for many. "Happy he who transfers what he knows and learns what he teaches"
Ich kenne Catia v 5 seit ca 10 Jahren, arbeite auch damit , aber was Sie hier vorführen, ist einfach Genial.! Respekt.! 2017 hatte ich die Möglichkeit gehabt in GSD die Prüfung zu bestehen mit Note1, aber ich merke es gibt noch sehr viel zu lernen..! Da ziehe ich nur vor Ihnen den Hut! Vielen Dank für alles was Sie uns hier beibringen.! 👌👌👌👍👍👍.. Danke vielmals...
at 22:44, does anybody knows what function/operation was that? I find it handy that you can easily select lines, axis, or edges within the boundaries of the magnifying glass. I would like to add this to my arsenal but I can't seem to find where and how I can perform that operation? Thank you
my I ask you sir how can I get my refrence 3 lines as you in my program it apears 3 squares , and thank you again for sharing all this information and knoaledge with us
Hi Sir, actually I am getting a problem while mirroring. Both the split are not getting mirrored, only the pad is mirrored. I tried a lot but unable to clear the problem. Plz, tell me something about this.
@@wolfgang.walden.cad.training hi Walden learn lot of things from your videos.thank you ... Can you make a complete video on CATIA v5 options settings 🤗🤗🤗
Hello Wolfgang, how do you send the H and V Direction into the show now? If I draw a frame over it, then the coordinate system is always marked with. Thanks
You should watch my "frame" closely, at first I zoom in , so the axis system gets bigger in relation and then I do the frame just big enough ;) But you could hide those elements by selecting them in the tree as well. Please check you selection options - with my settings it selects only elements which are complete inside the frame.
@@wolfgang.walden.cad.training Thanks for the answer. For me, the coordinate system is smaller than the H and V Direction. So I always choose the coordinate system with me. Can I aadjust this at Catia?
@@wolfgang.walden.cad.training We will assign keyboard shortcut under option/customize/all commands. In catia we have to assign the short cut with accelerator key (ctrl,sht,alt) and this displayed as icon. It is greyed and not enabled.
@@SatishKumar-gt6jd I assume you have to use "catia admin mode" to change this. Because usually those greyed out options can be changed only in admin mode.
@@wolfgang.walden.cad.training Thank you, I will check the model one more time. For some reason, when I try to select the front face, for shell function, it highlights the entire model. Thank you so much for your reply.
Nothing at all 😂because I´m not a designer at all. I just do these exercises to show you the kind of techniques you could use. Regarding the ergonomics - it is very bad.
I know this is very powerful software but this is so slow at this task it makes my mind explode. We are making parts like this in fusion 360 then importing them into nx for the same reason. This is just painful to watch.
How did I not find this youtube channel till now, woah!!!!! I love the content as well as maintain standard procedures of modeling example: Using POINT, LINE, PLANE for skecth reference and maintaining tree in a good way keeping sketches separate in geometric set and body separate set for pad
Thanks for your praise :)
Thank you Wolfgang for sharing your knowledge with us! His videos are a source of inspiration for many. "Happy he who transfers what he knows and learns what he teaches"
Thanks for your praise, much appreciated :)
Ich kenne Catia v 5 seit ca 10 Jahren, arbeite auch damit , aber was Sie hier vorführen, ist einfach Genial.! Respekt.! 2017 hatte ich die Möglichkeit gehabt in GSD die Prüfung zu bestehen mit Note1, aber ich merke es gibt noch sehr viel zu lernen..! Da ziehe ich nur vor Ihnen den Hut! Vielen Dank für alles was Sie uns hier beibringen.! 👌👌👌👍👍👍.. Danke vielmals...
Danke fürs fette Lob 🙂
Yes, please make an Inventor tutorial soon coz I'm working on a school project and your tutorial would really help me a lot, thank you in advance))
You could do it the same way as I did with the other programs. But inventor will be next ;)
at 22:44, does anybody knows what function/operation was that? I find it handy that you can easily select lines, axis, or edges within the boundaries of the magnifying glass. I would like to add this to my arsenal but I can't seem to find where and how I can perform that operation? Thank you
just watch this :th-cam.com/users/shorts3-LA4K9NZbY
This is awesome !!! It helps me a lot. Thank you so much!
Great, you´re welcome.
Thanks a lot!
You´re welcome
Hello and thanks for all you videos ! Little question , what is the keybind you use at 22:44 ?
It is the arrow up/down key. This will work if there is more than one object in a certain limited area.
Thanks a lot for making this video
you´re welcome
my I ask you sir how can I get my refrence 3 lines as you in my program it apears 3 squares , and thank you again for sharing all this information and knoaledge with us
Sorry, what do you mean? "reference 3 lines"? "3 squares" ? In catia?
@@wolfgang.walden.cad.training the shape of initial référence x y z
@@boulahya05 You mean the Axis-System? Please watch my catia basics videos. TOOLS->OPTIONS->INFRASTRUCTURE->PART INFRASTRUCTURE - insert axissystem
Hi Sir, actually I am getting a problem while mirroring. Both the split are not getting mirrored, only the pad is mirrored. I tried a lot but unable to clear the problem. Plz, tell me something about this.
Sorry, I´m not a clairvoyant. How should I know what you did wrong? You should consider providing a timestamp at least!
Good tutorial, thanks! Please use normalize feature for your voice, it sounds too quiet in all your videos.
Thanks, seems my recording level changed somehow. Sorry I havn´t noticed yet.
@@wolfgang.walden.cad.training hi Walden learn lot of things from your videos.thank you ... Can you make a complete video on CATIA v5 options settings 🤗🤗🤗
The multi-selection surface doesn't work for me, the angle is too sharp...
So you might have to change your model.
Can we use this seat in a go kart?? ?????????
How should I know? But I don´t think so.
Top job! 👌👌👌
Danke :)
Awsome😀
Awesome!! Thank you
thanks, you´re welcome
u help me a lot...thank you very much sir.
Great, you´re welcome
amazing work brro
Thanks :)
Hello Wolfgang,
how do you send the H and V Direction into the show now?
If I draw a frame over it, then the coordinate system is always marked with.
Thanks
You should watch my "frame" closely, at first I zoom in , so the axis system gets bigger in relation and then I do the frame just big enough ;)
But you could hide those elements by selecting them in the tree as well.
Please check you selection options - with my settings it selects only elements which are complete inside the frame.
@@wolfgang.walden.cad.training
Thanks for the answer.
For me, the coordinate system is smaller than the H and V Direction. So I always choose the coordinate system with me.
Can I aadjust this at Catia?
@@torstenr2493 TOOLS->OPTIONS->INFRASTRUCTURE->PART INFRASTRUCTURE->DISPLAY - there is a slider for the size of the axis system
Great 👍👍👍
thanks
In catia v5, accelerator key disabled which will be used for short cut.
How to enable?
What would be the "accelerator key" ???
@@wolfgang.walden.cad.training
We will assign keyboard shortcut under option/customize/all commands.
In catia we have to assign the short cut with accelerator key (ctrl,sht,alt) and this displayed as icon.
It is greyed and not enabled.
@@SatishKumar-gt6jd I assume you have to use "catia admin mode" to change this. Because usually those greyed out options can be changed only in admin mode.
@@wolfgang.walden.cad.training
When I open the catia i ran as administrator,
Still not resolved.
Please help.
@@SatishKumar-gt6jd Not as "windows admin", you have to start catia in "catia admin mode".
Hello Walden, For some reason the shell function won't work for me :( ..... It is giving me a tangency error. Any idea what might be the reason?
I would assume there is a radius which is to small - so if you shell it - there is no radius any more on the inside.
@@wolfgang.walden.cad.training Thank you, I will check the model one more time. For some reason, when I try to select the front face, for shell function, it highlights the entire model. Thank you so much for your reply.
S sir tq sir ur invincible sir
Thanks :)
Hi WW have you tried doing it completely in GSD ? do you think its easy or difficult in GSD........
Just try it and have fun ;)
Hi the way of approach you did, is really good, and simple. And i cannot imagine we can do like this, great stuff
Hi, I was just wondering if you could show us about bill of materials in CATIA
Hi, there is a video in my channel regarding BOM and advanced BOM in catia. Check my catia drafting videos.
Miss u plzz make GSD more videos esp landing gear
I´m very busy with paid trainings and I have to earn a living. So sometimes I´m to exhausted to do any YT-videos, sorry.
Where it was better to draw a seat-siemens NX or Catia v5?
In my opinion the round/filet in nx is better than the catia filet.
@@wolfgang.walden.cad.training Thank you!
@@ibragim_on you´re welcome
danke schön
Bitteschön :)
Awesome
Thanks :)
hello sir , can you please do a foldable car seat for children
Sorry, I´m very busy, even more than usual with paid Live-trainings online and offline as well. I don´t even have time to do new yt-videos.
How much you earn as seating design engineer
Nothing at all 😂because I´m not a designer at all. I just do these exercises to show you the kind of techniques you could use. Regarding the ergonomics - it is very bad.
Pl make automotive lighting reflector in ur next tutorial.
LOL Please send money before my next tutorial ;)
@@wolfgang.walden.cad.training it's free tutorial !!😀
@@sopankharche7523 Ok, where can I download it?
Good tutorial but can you please do an Inventor tutorial)
You may have noticed, I do all exercises if possible in all programs and therefore in Inventor as well. That is the idea of my channel. ;)
thanks you
You´re welcome
Wolfgang Walden I am learning how to draw catia v5, there are many things that I do not understand, can I ask you a question?
I know this is very powerful software but this is so slow at this task it makes my mind explode. We are making parts like this in fusion 360 then importing them into nx for the same reason. This is just painful to watch.
So please note this is just an exercise. Of course it is possible to model similar parts in catia very fast as well.
AMAZING!!
Thanks :)