awesome video! I like it with its little mistakes how we can learn from. The only thing what could be better, pls give everything dimensions to follow you step by step till the end. My wing looks really similiar but my re-build would take less time without trying to find the right value. But its just a little point, Great lesson! Thank you, Sir!
Wolfgang Walden yes, I agree. But while you know what you are building, your viewers have to guess what it is until you finished the Form. But anyway, just a little point. Very good video!
Nice and easy explanation. This shows your grip on the commands and the software. Great 👍 I'm also an automotive enthusiast and CATIA designer. I have learned the commands but still not so clear about using them. When the Part design is used, where GSD is used and how to use, I am facing trouble.😢 Can you help me understand the difference and need of each module by giving these types of model example
Really nice tutorial Wolfgang. I come from "Solidworks School", and Catia is in a different level. Your tutorials are helping me a lot. Would be nice if you, at the begining of the video, showed the drawing of the final product, with all dimensions. This way we could try to reach the final result, and follow your steps to improve or clarify any doubt we, viewers, might had. Thanks and continue the good work.
But the point was just to have something similar to an academic exercise. And then, follow your steps and check the solution (by watching your video) :)
I see, but neither time nor money to do more than I already do with my videos without earning money with these videos. There are no ads at all, despite being a youtube-partner for a very long time. So I will consider providing drawings but I can´t promise anything, sorry.
you made it so simple sir! great talent and knowledge! Can you please explain the CFD analysis which should be done after this sir? (a link leading to the topic would also be fine) Thank you!
Hello Wolfgang. At 30:56 in your video you opened a 2nd window with the options of different "Coupling" I was not able to open this window by any means. Can you please explain how to get this window open so i can make the selection "Tangency the Curvature Coupling" ?....Thanks
Hi sir, first of i would like to thank you for your content. it was very useful for my project design. Can I get like proper dimensions for front wing design sir. It would help in my project for the analysis part sir. Hoping that you would respond to this sir. Once again thank you for your time and content.
Hello sir. Can you please make a video on how to make f1 front wing as per 2018 rule with those complicated glaps design. You can use the pdf from Fia website for 2018 front wing. I facing tough time designing the series of flap and im feeling helpless.
@@wolfgang.walden.cad.training Thanks for your response sir. I'll wait for it. i'm checking with other website and your this video was big help. but making those complicated flaps design is a challenge right as i'm making one wing based on 2019 rules.
@@Nikkhlya R16 should even run on very low specs. Depends on what you want to do, for big assemblies you would need 16-32 Gb Ram and a decent Graphics Card.
I´m learning more in your Blog than with my presencial classes, your videos are clear, interesting and didactic. What a good teacher!!!!!
Great to hear, thanks for your praise :)
plain English, calm and proceeds very strait forward. Learned I lot. THX bro
Great, you´re welcome
Wow! I followed all your steps and really learned lots of tricks that you used in Catia V5. Vielen danke 🙏🏽
Great, you´re welcome!
Great video..... Your videos are the ones i go through whenever i encounter a design challenge.. Thanks for the them.... 👍
Thanks, you´re welcome
wonderful , i have watched so many tutorials of yours , all are so professional and helpful , big thanks to you Sir
Thanks, you´re welcome
Thank you so much Wolfgang, you're a legend
You´re welcome 🤣
thank you for this! calm, helpful, "simple"! learned alot!
Great :) you´re welcome.
thanks a lot Wolfgang, you helped me a lot!
Great 🙂you´re welcome
awesome video! I like it with its little mistakes how we can learn from. The only thing what could be better, pls give everything dimensions to follow you step by step till the end. My wing looks really similiar but my re-build would take less time without trying to find the right value. But its just a little point, Great lesson! Thank you, Sir!
Thanks, as it is completely made up, the dimensions really don´t matter at all. Just use your own.
Wolfgang Walden yes, I agree. But while you know what you are building, your viewers have to guess what it is until you finished the Form. But anyway, just a little point. Very good video!
I will try to provide pdfs for the exercises in the future ;)
thanks, Mr.
pls next video Back wing. GREAT JOB!!!
Hi, you could do a back wing very similar.
Nice and easy explanation. This shows your grip on the commands and the software. Great 👍
I'm also an automotive enthusiast and CATIA designer. I have learned the commands but still not so clear about using them. When the Part design is used, where GSD is used and how to use, I am facing trouble.😢 Can you help me understand the difference and need of each module by giving these types of model example
for surface design you need gsd - for solid design you need part design - and you can mix both 😉
Really nice tutorial Wolfgang. I come from "Solidworks School", and Catia is in a different level. Your tutorials are helping me a lot.
Would be nice if you, at the begining of the video, showed the drawing of the final product, with all dimensions. This way we could try to reach the final result, and follow your steps to improve or clarify any doubt we, viewers, might had.
Thanks and continue the good work.
I can´t show the drawing - because there is no drawing ;)
I bet a guy with your expertise would make one in 5 seconds xD
Perhaps ;) , but those dimension are completely made up, so it doesn´t really matter.
But the point was just to have something similar to an academic exercise. And then, follow your steps and check the solution (by watching your video) :)
I see, but neither time nor money to do more than I already do with my videos without earning money with these videos. There are no ads at all, despite being a youtube-partner for a very long time. So I will consider providing drawings but I can´t promise anything, sorry.
Awesome!!!
Thanks :)
you made it so simple sir! great talent and knowledge!
Can you please explain the CFD analysis which should be done after this sir? (a link leading to the topic would also be fine)
Thank you!
Sorry, I don´t do CFD.
did you find the cfd topic on this?
Thank You !
you´re welcome
Hello Wolfgang. At 30:56 in your video you opened a 2nd window with the options of different "Coupling" I was not able to open this window by any means. Can you please explain how to get this window open so i can make the selection "Tangency the Curvature Coupling" ?....Thanks
Maybe it is not included in your license. You can change these settings in the usual dialog window as well. This menu is sort of redundant.
I thought maybe in Tools/Customize I might find a command to ad it but I'm not that familiar with this area of Catia workbench yet,
I don´t think so.
Nice video
Thanks :)
Hi sir, first of i would like to thank you for your content. it was very useful for my project design. Can I get like proper dimensions for front wing design sir.
It would help in my project for the analysis part sir. Hoping that you would respond to this sir.
Once again thank you for your time and content.
So that front wing is completely made up. It is just to show you the ways/methods to create such a model.
Hello sir. Can you please make a video on how to make f1 front wing as per 2018 rule with those complicated glaps design. You can use the pdf from Fia website for 2018 front wing. I facing tough time designing the series of flap and im feeling helpless.
I will consider it, but I´m still very very busy. To do a model with those flaps would take a lot of time, even for myself.
@@wolfgang.walden.cad.training Thanks for your response sir. I'll wait for it. i'm checking with other website and your this video was big help. but making those complicated flaps design is a challenge right as i'm making one wing based on 2019 rules.
What does it mean fundamentally, to assemble the 'bodies' to the 'main' part body? thanks.
Boolean operation - union fo bodies.
During edge fillet1 , got non manifold error. How to resolve it
You must be kidding, how should I know? After all I´m not a clairvoyant. In order to help I would have to review your model.
Would you call an 'extract' a curve? Thanks for the video.
In this case the result of an extract - is a curve.
Great
thanks :)
Please tell me what are the graphics requirement for catia v5 R16
@@Nikkhlya R16 should even run on very low specs. Depends on what you want to do, for big assemblies you would need 16-32 Gb Ram and a decent Graphics Card.
Thanks
Can you do a video in solid edge st 8
Sorry, I have SE ST10 and I will do a video in solidedge st 10
Wolfgang Walden Thats ok, thanks i appreciate your work 👌
Hello sir. Can you give me a real time f1 deaign tips. I have done with these but im facing hard on real time 2018 designs
Sorry, I´ve missed this question.
HI sir i have one request can you please make human builder or human in catia v5 or Nx or solidworks videos
Sorry, I have not done human builder / human yet at all.
Hi mr
Wish you creat a telegram channel to putting 2d drawings it
Its better to us for learning more
Thank you
You can go to my grabcad account grabcad.com/wolfgang.walden-1/models
I use telegram but not for sharing 2d drawings sorry.
@@wolfgang.walden.cad.training thanks .I check it