Thanks for taking the time to make this video Morgan! We love hearing how different trades utilize the holsters. We're working to develop more tool carry solutions. We have XL holsters for the TapeMaster, MagMaster, DriverMaster, and HammerMaster. Our DIY section is for people who want to customize even further. Many people attach the holders to workbenches, ladders, work carts, etc.
Thank you for making the products. They are great quality and at a great price. I use multiple set-ups and being able to swap these around without taking things apart it what I need. Good to know about your DIY section, I was thinking about getting some magnets by themselves and mounting them to some things. Look forward to what’s next! (I’ll also pin this comment so it’s at the top)
I still wish you good folks at Holstery would make a Joey like device for longer Clamp Meters ( ie: Fluke , and the Feildpiece “ Stick Meters “ ) , good Clamp meters are pretty pricey up here in the Peoples Republic of Kanuckastsn !
These accessories look well thought, properly built and sturdy. I myself use standard Makita belts and pouches. They have quite reasonable prices, last long enough and are configurable. Nice feature with time stamps notification.
Just used the square holster on a small framing project where I didn’t want to carry bags due to the small space. I’m sold! Going to buy a couple more for my guys. Thanks for putting it on my radar.
It was the first thing I bought of theirs too for the same reason. Most bags that hold a square are the really big ones and I don’t need those hardly ever. That, and I like how I get to chose it’s placement and move it as needed. Glad you like it!
had my holstery drivemaster yesterday and used it today for first time what a great bit of kit the only thing I have used and it works and is comfortable on a normal belt and actually keeps the driver at the right place very happy highly recommend
Glad you like it. I like the low profile of all their products. I switch between the DriverMaster and my Spider Holster depending on what kind of contortionist I have to be for the given job. Thanks for watching and for sharing your thoughts 👍
@@MORGANSMaintenance I use the spider but find it keeps locking the driver in place .... after watching this I've looked at their other stuff and Im ordering some more stuff thanks for doing a post 👍
First time I see the speed square holster.Very useful when I´m measuring and marking cuts and all I need is my speed square,tape measure and a pencil on my ear,instead my heavy tool belt system.
@@THETIMINATORTHETOOLMAN I like mine. The Spider Holster is more secure but the part you put on your Tool occasionally gets in your way. I only use the Spider Holster now if I’m working at higher height
Hi Morgan. Love the magnet, so much better then the cheap China one I used before. It lives on my belt every single day when I’m working. Great for holding screws, drill bits etc. Now ordering the drill holder. Looked at many options but this is just simple and has no moving parts that can break. And holstery ships to Europe so that’s a massive plus. Not all USA makers ship here.
@@MORGANSMaintenance yea it’s a beast. Mostly I use it for the little screws that go with the fire alarm and security systems I’m mostly working on right now. No more dropping them from a height to the floor never to be seen again. Often I come home after driving for an hour or so with still some stuck to the magnet. They don’t fall off even with a coat rubbing on them or a seatbelt. Other big plus for me is that I can just look down and see what I want to take of it. I can have a mix on there and not dig around in a pocket or a pouch. Highly recommend it. Hope your having a great day Morgan.
I just got a Joey , a Magmaster , and an Impact hanger ! I really like them so far . I also want one of the Mod Belts , since I do too much wood stuff , so the square holders don’t make my priority , I have a 4” Starrett Combination square ( mostly for metal layout ! ) . I’m not sure about the hammer hanger , I suspect the magnet will cover that base .
Holstery has sent me a bunch of framing related pouches and accessories to demo and tryout. I will be putting out some videos on them in the near future
@@MORGANSMaintenance thanks for watching! I really appreciate it. So far the Joey pouch has arrived and tomorrow the carpentry setup as well as there unreleased hybrid system also. To say im excited about trying this out would be an understatement. When I've tried towards a lighter setup in the past it's been met with inferior quality pouches etc...something more suited for weekend warrior types. So far the build quality is top.notch and attention to detail is second to none. Thanks again for watching and I look forward to what content you have on the way
Yeah I put them on my Tool Vest a little more often than anywhere else and it’s a close fit with the 1-3/4 but it works. I think 2” is a little more standard. I’m glad to see them coming with the bigger option on their newer products. Thanks for watching!
@@wim0104 I think I saw that on their website now that you say that… I didn’t know that either so you learned something and taught me something. Pulling double duty!
Not a fan of the square holder , at least in occupied spaces ( a true wall scratcher ) . Other than that I like the line . The Mod Belts are also awsome ! I love the Joey , and am tempted by the new large version !
Yeah I haven’t got the bigger yet… but I’ve been thinking about it. I keep my square more to my front most of the time to keep me from scratching stuff…. Like you, I could see it happening.
@@MORGANSMaintenance I made full flap holsters for all my Squares , both speed squares , and Starret machinist squares ( except for my 12” Starrett , with protractors etc ) , sharp edges / corners cut stuff , end of story ! Kinda like the Hypocritical Oath , Doctors swear , “ first do no harm “ !
@@MORGANSMaintenance I have both speed squares and precision squares due to the fact I sometimes have to accurate work in metal , during retrofit duties .
You know anything about the pouch? in the Joey pouch pictures on Amazon you can see its clipped onto another pouch similar in build it has a level sticking out of it, can't find it on they're website.
I was thinking so, I'd be interested in that set up. I like the hi viz inside probably will end up picking one up. I just dropped off my klein pouch to have a buddy put a leather cover on it.
![🎤 ไปกันต่อออ! จับฉลากร้องเพลง x P’ #XXSIVK [EP.2] (1/2) เพลงของใครจึ้งสุดน้าา 💓🎤 #MXFRUIT](http://i.ytimg.com/vi/mLI_K0sAS4o/mqdefault.jpg)
Thanks for taking the time to make this video Morgan! We love hearing how different trades utilize the holsters. We're working to develop more tool carry solutions. We have XL holsters for the TapeMaster, MagMaster, DriverMaster, and HammerMaster. Our DIY section is for people who want to customize even further. Many people attach the holders to workbenches, ladders, work carts, etc.
Thank you for making the products. They are great quality and at a great price. I use multiple set-ups and being able to swap these around without taking things apart it what I need.
Good to know about your DIY section, I was thinking about getting some magnets by themselves and mounting them to some things.
Look forward to what’s next!
(I’ll also pin this comment so it’s at the top)
I still wish you good folks at Holstery would make a Joey like device for longer Clamp Meters ( ie: Fluke , and the Feildpiece “ Stick Meters “ ) , good Clamp meters are pretty pricey up here in the Peoples Republic of Kanuckastsn !
These accessories look well thought, properly built and sturdy.
I myself use standard Makita belts and pouches. They have quite reasonable prices, last long enough and are configurable.
Nice feature with time stamps notification.
Thanks. It was getting long on me since I did four things so I had to look up how to do the time stamp… ( slowly learning 😂)
Glad to hear from you!
Just used the square holster on a small framing project where I didn’t want to carry bags due to the small space. I’m sold! Going to buy a couple more for my guys. Thanks for putting it on my radar.
It was the first thing I bought of theirs too for the same reason. Most bags that hold a square are the really big ones and I don’t need those hardly ever.
That, and I like how I get to chose it’s placement and move it as needed.
Glad you like it!
had my holstery drivemaster yesterday and used it today for first time what a great bit of kit the only thing I have used and it works and is comfortable on a normal belt and actually keeps the driver at the right place very happy highly recommend
Glad you like it. I like the low profile of all their products. I switch between the DriverMaster and my Spider Holster depending on what kind of contortionist I have to be for the given job.
Thanks for watching and for sharing your thoughts 👍
@@MORGANSMaintenance
I use the spider but find it keeps locking the driver in place .... after watching this I've looked at their other stuff and Im ordering some more stuff thanks for doing a post 👍
First time I see the speed square holster.Very useful when I´m measuring and marking cuts and all I need is my speed square,tape measure and a pencil on my ear,instead my heavy tool belt system.
It’s the best speed square holder I have used… and I like how solid it is built.
Thanks for watching 👍
Great video
Looks like I’m gonna have to go shopping on Amazon again!!
I know…TH-cam costs me A LOT of money seeing what everyone uses. I wish I had the will power to say “What I have is fine” 😂
I ordered the driver master today.
Spending more money LOL
@@THETIMINATORTHETOOLMAN I like mine. The Spider Holster is more secure but the part you put on your Tool occasionally gets in your way. I only use the Spider Holster now if I’m working at higher height
Hi Morgan. Love the magnet, so much better then the cheap China one I used before. It lives on my belt every single day when I’m working. Great for holding screws, drill bits etc. Now ordering the drill holder. Looked at many options but this is just simple and has no moving parts that can break. And holstery ships to Europe so that’s a massive plus. Not all USA makers ship here.
Good to know you can get your hands on some. The magnets are super strong, they will even hold a hammer 😂
@@MORGANSMaintenance yea it’s a beast. Mostly I use it for the little screws that go with the fire alarm and security systems I’m mostly working on right now. No more dropping them from a height to the floor never to be seen again. Often I come home after driving for an hour or so with still some stuck to the magnet. They don’t fall off even with a coat rubbing on them or a seatbelt. Other big plus for me is that I can just look down and see what I want to take of it. I can have a mix on there and not dig around in a pocket or a pouch. Highly recommend it. Hope your having a great day Morgan.
@@robholland5925 saves you many trips up and down a ladder looking for them too.
Appreciate that… you have a great day as well 👍👍
I just got a Joey , a Magmaster , and an Impact hanger ! I really like them so far . I also want one of the Mod Belts , since I do too much wood stuff , so the square holders don’t make my priority , I have a 4” Starrett Combination square ( mostly for metal layout ! ) . I’m not sure about the hammer hanger , I suspect the magnet will cover that base .
Yeah I don’t use a hammer hanger anymore, just the magnet. I am really liking the Joey pouches. I already bought another one.
That magnet is 💪
@@MORGANSMaintenance Very smart device !
Holstery has sent me a bunch of framing related pouches and accessories to demo and tryout. I will be putting out some videos on them in the near future
Sweet! I already watch your videos… Look forward to seeing how you use them.
Have a great day!
@@MORGANSMaintenance thanks for watching! I really appreciate it. So far the Joey pouch has arrived and tomorrow the carpentry setup as well as there unreleased hybrid system also. To say im excited about trying this out would be an understatement. When I've tried towards a lighter setup in the past it's been met with inferior quality pouches etc...something more suited for weekend warrior types. So far the build quality is top.notch and attention to detail is second to none.
Thanks again for watching and I look forward to what content you have on the way
Hey man did u never get round to the video?? How did u get on with holstery
Subbed just for the this old house reference
Still set to record on my DVR today… I don’t think it’s as good as it used to be, but I still like it.
Thanks for commenting and subscribing!
The XL belt news is what stopped me picking these up - got a 2" belt that i cant live without - just ordered yeew
Yeah I put them on my Tool Vest a little more often than anywhere else and it’s a close fit with the 1-3/4 but it works. I think 2” is a little more standard. I’m glad to see them coming with the bigger option on their newer products.
Thanks for watching!
I also like how you are a “coffee addicted” Electrician… we have a lot in common 😂
@@MORGANSMaintenance aeropress is my new coffee toy - its pretty nice for decent quality work coffee 👌
Good video. I just bought the magnet.
Thank You! It is extremely strong… strong enough to hold a pipe wrench.
I use it for all sorts of stuff, hope you like it!
I want to buy their rivet-bolts!
They would probably sell you some, they sell every other part it looks like.
they're called "chicago screws". learn every day :-)
@@wim0104 I think I saw that on their website now that you say that… I didn’t know that either so you learned something and taught me something. Pulling double duty!
Not a fan of the square holder , at least in occupied spaces ( a true wall scratcher ) . Other than that I like the line . The Mod Belts are also awsome ! I love the Joey , and am tempted by the new large version !
Yeah I haven’t got the bigger yet… but I’ve been thinking about it. I keep my square more to my front most of the time to keep me from scratching stuff…. Like you, I could see it happening.
@@MORGANSMaintenance I made full flap holsters for all my Squares , both speed squares , and Starret machinist squares ( except for my 12” Starrett , with protractors etc ) , sharp edges / corners cut stuff , end of story ! Kinda like the Hypocritical Oath , Doctors swear , “ first do no harm “ !
@@MORGANSMaintenance I have both speed squares and precision squares due to the fact I sometimes have to accurate work in metal , during retrofit duties .
You know anything about the pouch? in the Joey pouch pictures on Amazon you can see its clipped onto another pouch similar in build it has a level sticking out of it, can't find it on they're website.
I just looked at it. It’s nothing they have released yet that I have seen. Maybe it’s what they are coming out with next?
I was thinking so, I'd be interested in that set up. I like the hi viz inside probably will end up picking one up. I just dropped off my klein pouch to have a buddy put a leather cover on it.
@@willhamilton9121 I would like to have it as well
You've spotted a prototype in testing :) It's a little ways out but we're very excited. It will be part of a system.
@@the_holstery sweet. Keep making stuff, I love it all!