So nice to see extremely high quality artefacts being restored and loved. Just looking at these things tells of a time when men were more capable. Yes, men and I'm not ashamed of mentioning 50% of all the genders that were alive when this lathe was built.
No that’s a Jim Dandy video. Just stumbled across you. Really enjoyed it, no dumbass music and the narration was excellent and honest. Thanks for sharing. Looks amazing. Top shelf
My dad was a machinist at the company that made and manufactured that black tape. When he retired we had 100’s of rolls. It was great for gripping baseball bats and hockey sticks. I still have boxes of it today, it’s amazing.
Years ago I had a shop. I had to have a motor serviced. I had thought of doing it myself but decided to take it to another shop that also rewound the motor. When the company had finished with their work they had rewound the motor, changed out the bearings, and repainted the motor while saving the etched legend plate. This was in the City of Sacramento, the company was Van Alstyne Electric and in some form they are still in business today but, I don't know if they rebuild motors. After they had finished rebuilding my motor it had been brought back up to its full horsepower rating where, when I had taken the motor in, it had lost about a quarter of a horsepower so; definitely rewinding motors makes a big difference. I put the motor back in the machine tool and clearly it made the machine look old.
I've been doing this stuff for over 45 years, and I watch a lot of these kind of videos. I just found your channel and it's great to watch someone who "actually" knows what they are doing. Thanks for a great watch !!!
Good to see Gary working on the Monarch. Although I have to admit that I would never have thought the stator could survive a trip through a heated parts washer, but I respectfully bow to your superior knowledge. Sounds and looks good enough to run for another 65 years.
Just wanted to mention about poplar lumber, if you’re talking about ‘tulip’ poplar, we are in North Carolina where the major early succession species is tulip poplar. We settled our village (Earthaven) on 320 acres of second growth forest populated by mostly juvenile poplar and red maple forest, with some southern yellow pine and hemlock. The topography is mixed with only about 40 acres flat agricultural land and several different areas of buildable south facing slopes. We wanted to leave at least two thirds of the land in forest in which to practice timber stand improvement logging, and build our infrastructure out of the timber removed for clearing. We didn’t have much choice but to use what we had. So we built the community center council hall and the first ten or so houses out of a lot of green poplar lumber. It’s fine. A little harder that the spruce and yellow pine that’s conventional around here, but not too much.
Very enjoyable; took me back to 1976 when I worked for Monarch as an engineer fresh out of school. Although I wanted to work on CNC tools, I wound up doing custom design work on the 1620 and similar lathes; boy they were beauties!
just found you, subbed. no pounding drums or swirling whooshing intrusive background shit noise just engineering at it's best. Good to see someone who knows how to tighten bolts diagonally not in a circular pattern. Great vid will be watching your back catalogue. thank you
Gary, I put a sheet over the BP, the Tormach and the lathe after each use. It's been wet in SoCal this year and no flash rust. Takes seconds to put on, seconds off. Plain sheet, not a motorcycle cover or any plastized or rubberized thing. Just an old bed sheet. Keeps dust and dirt off too.
Great job Gary. I have rebuilt several motors and washed them as well. Luckily, like you, I lived in a warm part of the country at the time. Didn't take too long to dry every thing out. Fans and a heat lamp can be used to dry them out as well. The air movement really drys them out. Out of caution, I generally gave them about 5 days, longer if it was colder. So satisfying to see one of these motors run and run smoothly. There was a time when rebuilding, including rewinding motors was very common. Today, with the high cost of labor, we are a disposable society. What a shame. Thanks very much for sharing. Take care.
i bought a standard modern 10 inch utilathe and lovingly restoring it, the motor was fried(years of metal chips inside) I got it rewound and all that good stuff but its true most people would rather get a new lathe than learn to fix an old one with probably a few centuries more life left in them( that's how I got it lol so I'm not complaining too much)
Wishing you a complete and speedy recovery. I've had the right hip replaced twice and the left once. At 81 I'm still running around (somewhat slower than in the past) and having fun. Best wishes from Germany.
Thanks Paul. I’m sure they were trying to cut down on some weight. When the bells are in place they’re very strong, it’s just when you need to disassemble the motor is when things can go bad real quick. Always nice to have you stop by the channel. Gary
Hi Gary. I really have enjoyed your videos. I just scored a 20x78 series 61 I’m super excited about it. I was nervous it would have a broke shifter fork but much to my relief everything is good in the headstock! I’m hoping you will have some more monarch content in the future. I’m going to go all the way though this thing and replace any worn or broken parts. My goal is to eventually make it like new. I would love to be able to compare notes, I know your monarch is very similar to the one I got. Thanks!
Your standard…awesome video production/discussion/demonstration/build, certainly nice to have the commerical shop facilities but it still takes an experienced talented mechanic/machinist
Chuck, you have always been a big support to not just my channel but to many other channels as well. I know I always appreciate it very much my friend. Gary
I did not blink an eye for the whole forty minutes duration of your captivating video and out of the ordinary knowledge and craftsmanship. Thank you for sharing.
Great to watch some real old-school professionals, the wiring job you did was superb, that motor is going to be like from the factory. I used to do bigger motor jobs for a giant laundry and commercial wool-dying plant, they can be very heavy. Love the channel🤠
Ralfy, I just wish I had more time to spend on it. You definitely get your share of jumping around from project to project I bet. Your eye seems to be healing up nicely. Always nice when I see you stop by the channel, hope you’re having a great weekend. Gary
I might suggest the first thing after drying the stater, should have been a hi-pot test. Could save a lot of agony in the future, or even your life. Great video.
Hey Gary. Check out Polaris connectors instead of split bolts. They are fully insulated and come in many sizes. The cats meow for splicing and tapping larger conductors. I hate wrapping split bolts. In particular in tight spaces like electrical enclosures. All the best, Tom
Use to replace bearings on large fan motors in building A/H's. Brought back lots of memories watching this. Didn't notice if you used neverseeze on bolts or shieves. Of course we were tearing down every couple of years because of 7/24 operations. Really enjoy watching the jobs you do. As always, excellent care and work being done. Thanks for your time.
John, it’s nice to have you stop by the channel. Glad I could bring back a few memories. In this particular case I did not use any neverseeze because of its environment, Anything that has the slightest amount of movement will in time where. My day job is working on stuff that also runs 24 /7 so I definitely take a different approach to each job and conditions. Thanks for stopping by. Gary
Saturday morning, and I'm enjoying a nice cup of coffee while watching your video. Thank you! I've wrapped a large bearing in a moistened paper towel and microwaved for a slip on fit.
I have a induction bearing heater that works very well, but sometimes I like to just press them on. Gives me a better feel for what kind of fit they have. Thanks for watching. Gary
ya say there's still a chance for my ol' 4 HP ! Love them split bolt connectors for a secure connection ... ( and mainly 'cause I got a life-time supply of rubber wrapping tape to use up ). Congrats on hitting that 7K subscribers mark ! ... 70% of the way to that soon to come 10K mark !
Thanks very much for another excellent video. Since I am not an experienced machinist you videos are particularly valuable to me. I am always impressed by the clever ways that you do things and the assured manner in which you do them. I liked the way you threaded the holes to get the end bells off and the way you solved the problem of the old cloth-insulated wires. That big old motor is as good as new. Best wishes from Germany.
You mentioned about how some people would be nervous about washing the windings. Getting a good dry on them is the key… BUT.. BUT… if you didn’t get a good dry…. You would find out very fast when the lacquer insulation paint went on.. it would pull that water to the surface… and give a good signal that more drying is needed.
Gary, what a treat, I have been waiting for this one since I saw the video of you and Mike at the auction site. It is such a pleasure to see the job done correctly and great idea on the wire numbering tags. Good job on the edit and story telling too. Best, Rich
Rich, I just wish I had more time to dedicate to the Monarch. I just got too many irons in the fire, but making a little progress. Appreciate the kind words and you taking the time to check out the video. Gary
So satisfying to see a machine part made 65 years ago restored to almost new and ready for work again, just makes me wonder in 20-30 years time will anybody still be doing this or will they have all gone to that machine shop in the sky
I'm quite sure Miss Mona Monarch Will be very happy when she gets her Spiffy newmotor Installed so she can show off her abilities. Great video I really enjoyed it
Glad Tom mentioned your channel! This content is right up my alley... I maintain nature gas compressors at a gas storage facility... we have three ingersoll rand SVG's and three KVG compressors, unfortunately they don't need the kvg's anymore so I am scrapping them... they ran great before we stopped using them about 2 years ago... Would you be interested in any parts?
A nice Wash Cabinet will definitely spoil you. The one I show in the videos is our smaller cabinet that holds 60 gallons. I also have the exact same cabinet at home. But at work we also have 160 gallon Wash Cabinet outside which I have not shown yet. We run much harsher chemicals in the big cabinet so it strips everything. Always nice to have you stop by and check out the videos. Gary
You did a nice job, I used to work in a rewind Shop years ago. Sometimes companies would have us put in grease Xerx for the bearings and weep hole with a plug in the other hole. We would unshield the bearings on one side Then they could Add grease as needed. my understanding was it kept the inside from getting all greased up and extended the life of the bearings. When you regrease the bearings you would pull the plug and let the old grease pump out.
So nice to see extremely high quality artefacts being restored and loved. Just looking at these things tells of a time when men were more capable. Yes, men and I'm not ashamed of mentioning 50% of all the genders that were alive when this lathe was built.
That parts washer is amazing , WOW !
I know right? Ive never seen one like that. Does a fantastic job too
@@mattymcsplatty5440 here's the video where he picks it up. th-cam.com/video/60qHym-LJ4k/w-d-xo.html
Clearly Ancient Alien technology.
No that’s a Jim Dandy video. Just stumbled across you. Really enjoyed it, no dumbass music and the narration was excellent and honest. Thanks for sharing. Looks amazing. Top shelf
My dad was a machinist at the company that made and manufactured that black tape. When he retired we had 100’s of rolls. It was great for gripping baseball bats and hockey sticks. I still have boxes of it today, it’s amazing.
Years ago I had a shop. I had to have a motor serviced. I had thought of doing it myself but decided to take it to another shop that also rewound the motor. When the company had finished with their work they had rewound the motor, changed out the bearings, and repainted the motor while saving the etched legend plate. This was in the City of Sacramento, the company was Van Alstyne Electric and in some form they are still in business today but, I don't know if they rebuild motors. After they had finished rebuilding my motor it had been brought back up to its full horsepower rating where, when I had taken the motor in, it had lost about a quarter of a horsepower so; definitely rewinding motors makes a big difference. I put the motor back in the machine tool and clearly it made the machine look old.
I've been doing this stuff for over 45 years, and I watch a lot of these kind of videos. I just found your channel and it's great to watch someone who "actually" knows what they are doing. Thanks for a great watch !!!
Clifford, I really appreciate the kind words. Welcome to the channel. Gary
@@OldIronMachineWorks Just giving credit where credit is due. Thanks' for your efforts.
You should do this work for martin marietta and for hi Hierman and Nelson and compton CA. Love to see things like this done. that's a great lathe too.
respectful， craftsman
You deserve support, admiration, appreciation and respect for this most wonderful work ❤🌺🌺💞🌹
Good for another 70 years!
Thanks Stan, appreciate you stopping by the channel. Gary
Damn that was a good vide, just an honest guy doing honest work and keeping old things still running, well done.
Thank You, I appreciate the kind words. Gary
man that motor was running smooth. nice job, that has to be satisfying.
I thought that stator was done for but it came out damn clean
Good to see Gary working on the Monarch. Although I have to admit that I would never have thought the stator could survive a trip through a heated parts washer, but I respectfully bow to your superior knowledge. Sounds and looks good enough to run for another 65 years.
Thank you Paul. I don’t get a lot of time to work on the monarch, but a little progress is better than none.
Just wanted to mention about poplar lumber, if you’re talking about ‘tulip’ poplar, we are in North Carolina where the major early succession species is tulip poplar. We settled our village (Earthaven) on 320 acres of second growth forest populated by mostly juvenile poplar and red maple forest, with some southern yellow pine and hemlock. The topography is mixed with only about 40 acres flat agricultural land and several different areas of buildable south facing slopes. We wanted to leave at least two thirds of the land in forest in which to practice timber stand improvement logging, and build our infrastructure out of the timber removed for clearing. We didn’t have much choice but to use what we had. So we built the community center council hall and the first ten or so houses out of a lot of green poplar lumber. It’s fine. A little harder that the spruce and yellow pine that’s conventional around here, but not too much.
I did notice one thing, if you had a longer extension you could of remove the end bell from across the street. Nice job.😊😊😊😊😊
I was thinking he was being polite and staying out of the shot with that long extension. A real pro move in video production.
Randy, I wanted my longer extension but I couldn’t find it. Always nice to have you stop by the channel. Hope you’re having a great weekend. Gary
You bad😂😂😂
Very enjoyable; took me back to 1976 when I worked for Monarch as an engineer fresh out of school. Although I wanted to work on CNC tools, I wound up doing custom design work on the 1620 and similar lathes; boy they were beauties!
Man this Monarch is going to be amazing when you are done restoring it. I love your attention to detail.
As a person that did this job I would have to say that is purity Great Millright work right there.
Thank You Gary
just found you, subbed. no pounding drums or swirling whooshing intrusive background shit noise just engineering at it's best. Good to see someone who knows how to tighten bolts diagonally not in a circular pattern. Great vid will be watching your back catalogue. thank you
Great video, and no music. Thank you.
the stator looks like a freshly cooked grab Great job 😍👍
Gary, I put a sheet over the BP, the Tormach and the lathe after each use. It's been wet in SoCal this year and no flash rust. Takes seconds to put on, seconds off. Plain sheet, not a motorcycle cover or any plastized or rubberized thing. Just an old bed sheet. Keeps dust and dirt off too.
Heck yeah love watching restoration videos
Great job Gary. I have rebuilt several motors and washed them as well. Luckily, like you, I lived in a warm part of the country at the time. Didn't take too long to dry every thing out. Fans and a heat lamp can be used to dry them out as well. The air movement really drys them out. Out of caution, I generally gave them about 5 days, longer if it was colder. So satisfying to see one of these motors run and run smoothly. There was a time when rebuilding, including rewinding motors was very common. Today, with the high cost of labor, we are a disposable society. What a shame. Thanks very much for sharing. Take care.
i bought a standard modern 10 inch utilathe and lovingly restoring it, the motor was fried(years of metal chips inside) I got it rewound and all that good stuff but its true most people would rather get a new lathe than learn to fix an old one with probably a few centuries more life left in them( that's how I got it lol so I'm not complaining too much)
Another nice job, Gary. I'm recovering from a hip replacement, so all I can do for a while is watch other people work. This was a treat.
Joe, always appreciate when you stop by the channel. I hope the healing from the operation goes quickly. Gary
I hope your recovery is going well Joe.
Wishing you a complete and speedy recovery. I've had the right hip replaced twice and the left once. At 81 I'm still running around (somewhat slower than in the past) and having fun. Best wishes from Germany.
I learnt a lot from that Gary. Amazed how light those end bells were. A hoist is an absolute must have with a 300lb motor. Great vid thanks.
Me too Paul, his ethic and knowledge are bob on
Thanks Paul. I’m sure they were trying to cut down on some weight. When the bells are in place they’re very strong, it’s just when you need to disassemble the motor is when things can go bad real quick. Always nice to have you stop by the channel. Gary
Hi Gary. I really have enjoyed your videos. I just scored a 20x78 series 61
I’m super excited about it. I was nervous it would have a broke shifter fork but much to my relief everything is good in the headstock!
I’m hoping you will have some more monarch content in the future. I’m going to go all the way though this thing and replace any worn or broken parts. My goal is to eventually make it like new. I would love to be able to compare notes, I know your monarch is very similar to the one I got. Thanks!
Very nice and instructional video. Thanks!!
Nice job, I worked for the Bulard Co back in the 60'ss as a service man,
Gramps
Thank you.
I agree with Bobb, that washer is worth it’s weight in elbow grease
everytime I see you using your wash cabinet I want one. Now if I only had room. Always a professional job, no shortcuts on quality.
Wash Cabinet‘s are definitely nice. Thank you for the kind words. Gary
Your standard…awesome video production/discussion/demonstration/build, certainly nice to have the commerical shop facilities but it still takes an experienced talented mechanic/machinist
Chuck, you have always been a big support to not just my channel but to many other channels as well. I know I always appreciate it very much my friend. Gary
I did not blink an eye for the whole forty minutes duration of your captivating video and out of the ordinary knowledge and craftsmanship.
Thank you for sharing.
Your finished motor sounds like absolute silk. So well done.
Great rebuild. I learned a few things, including using fusion tape. I liked how you fixed the wiring and included the wire numbers
Jim
Great to watch some real old-school professionals, the wiring job you did was superb, that motor is going to be like from the factory. I used to do bigger motor jobs for a giant laundry and commercial wool-dying plant, they can be very heavy. Love the channel🤠
Those bearings look expensive but worth it. It should last another seventy years now Gary. Nice work🔧⚒🔩
Randy, I forgot what I paid but they were pretty reasonable. They will definitely outlive me. Always nice to have you stop by the channel. Gary
Happy days Gary buddy, wonderful inspirational and educational as ever my friend, nice to see you working on that beautiful old Monarch 😀
Ralfy, I just wish I had more time to spend on it. You definitely get your share of jumping around from project to project I bet. Your eye seems to be healing up nicely. Always nice when I see you stop by the channel, hope you’re having a great weekend. Gary
I like your way of marking the winding coils with numbers Sir. Job well done.
I might suggest the first thing after drying the stater, should have been a hi-pot test. Could save a lot of agony in the future, or even your life. Great video.
Hey Gary. Check out Polaris connectors instead of split bolts. They are fully insulated and come in many sizes. The cats meow for splicing and tapping larger conductors. I hate wrapping split bolts. In particular in tight spaces like electrical enclosures.
All the best,
Tom
Three are needed for this application. They are a good product but very pricey.
@@gregeconomeier1476 Mcmaster Carr. Home depot also carries them. The cost varies widely by the maximum conductor size and number of taps.
Tom, I will definitely have to check them out. Always nice to have you stop by. Gary
Our electrical contractors al love these things. I did not know they were called Polaris thank you.
Use to replace bearings on large fan motors in building A/H's. Brought back lots of memories watching this. Didn't notice if you used neverseeze on bolts or shieves. Of course we were tearing down every couple of years because of 7/24 operations. Really enjoy watching the jobs you do. As always, excellent care and work being done. Thanks for your time.
John, it’s nice to have you stop by the channel. Glad I could bring back a few memories. In this particular case I did not use any neverseeze because of its environment, Anything that has the slightest amount of movement will in time where. My day job is working on stuff that also runs 24 /7 so I definitely take a different approach to each job and conditions. Thanks for stopping by. Gary
@@OldIronMachineWorks I understand your point. Always a pleasure watching you fix mechanical rotating machinery.
Those are some pretty fine bell castings, usually cast iron from this era is a bit thicker.
That was very enjoyable to watch. Thanks for posting!
Thank you Paul
What an inspired method of splitting the casing by tapping those threads!!!
Saturday morning, and I'm enjoying a nice cup of coffee while watching your video. Thank you! I've wrapped a large bearing in a moistened paper towel and microwaved for a slip on fit.
I have a induction bearing heater that works very well, but sometimes I like to just press them on. Gives me a better feel for what kind of fit they have. Thanks for watching. Gary
ya say there's still a chance for my ol' 4 HP ! Love them split bolt connectors for a secure connection ... ( and mainly 'cause I got a life-time supply of rubber wrapping tape to use up ). Congrats on hitting that 7K subscribers mark ! ... 70% of the way to that soon to come 10K mark !
Thank you Ken, and I’m sure there’s still hope for your 4 hp. Thanks for watching. Gary
Very good camera placement
Thanks very much for another excellent video. Since I am not an experienced machinist you videos are particularly valuable to me. I am always impressed by the clever ways that you do things and the assured manner in which you do them. I liked the way you threaded the holes to get the end bells off and the way you solved the problem of the old cloth-insulated wires. That big old motor is as good as new. Best wishes from Germany.
Thank you very much Bruce. Gary
You mentioned about how some people would be nervous about washing the windings.
Getting a good dry on them is the key… BUT..
BUT… if you didn’t get a good dry…. You would find out very fast when the lacquer insulation paint went on.. it would pull that water to the surface… and give a good signal that more drying is needed.
여러가지 느끼는 점이 많이 있었던 훌륭한 작업입니다. 감사합니다.
I really enjoy watching your videos of you working on those old lathes. Great content, thanks for sharing Gary!!!
Thanks 👍
great video, I have a soft spot for Monarchs. Hoppes #9 gun solvent works great on flash rust, really brightens bare steel.
Gary, what a treat, I have been waiting for this one since I saw the video of you and Mike at the auction site. It is such a pleasure to see the job done correctly and great idea on the wire numbering tags. Good job on the edit and story telling too. Best, Rich
Rich, I just wish I had more time to dedicate to the Monarch. I just got too many irons in the fire, but making a little progress. Appreciate the kind words and you taking the time to check out the video. Gary
So satisfying to see a machine part made 65 years ago restored to almost new and ready for work again, just makes me wonder in 20-30 years time will anybody still be doing this or will they have all gone to that machine shop in the sky
Thank you Terry, hopefully they’ll be young blood that continues on with some of the vintage machines. Thanks for watching. Gary
fantastic ideas you are sharing......sure love that cleaning cabinet ..........cheers from Orlando, Florida, Paul
That’s a proper job!
Nicely done Gary
Thank you Jeff
Such as awesome and meticulous restoration sir!
Tom Lipson says Hi. Nice work on the motor. Keep smilin
did you mean lipton
@@tomgiorgini9154 I did, Sorry Tom
the lathe was born the same year I was!....Way old! lol
I'm quite sure Miss Mona Monarch Will be very happy when she gets her Spiffy newmotor Installed so she can show off her abilities. Great video I really enjoyed it
Thank you Larry
Came over from Oxtool. Great video!
You do real nice work thanks for the link 🎉video
Glad Tom mentioned your channel! This content is right up my alley... I maintain nature gas compressors at a gas storage facility... we have three ingersoll rand SVG's and three KVG compressors, unfortunately they don't need the kvg's anymore so I am scrapping them... they ran great before we stopped using them about 2 years ago... Would you be interested in any parts?
Hi, Tom ftom Ox Tools pointed me your way. Great videos. I really like your parts cleaner, never seen one like that before. Very cool work.
Great video Gary, I would love to find me one of those parts washers like yours..mine holds eighty gallon of cleaner but hand scrubbing sucks, lol..
A nice Wash Cabinet will definitely spoil you. The one I show in the videos is our smaller cabinet that holds 60 gallons. I also have the exact same cabinet at home. But at work we also have 160 gallon Wash Cabinet outside which I have not shown yet. We run much harsher chemicals in the big cabinet so it strips everything. Always nice to have you stop by and check out the videos. Gary
Super job, thanks for sharing.
Thank you Thomas
Man that parts wash cabinet is the cats meow when it comes to projects like these.
Tom, once you have one you don’t want to go without. That’s why I bought the same cabinet for my home shop. Always nice to have you stop by. Gary
Fantastic work, your a real trademen
Thank you very much!
Really nice job on the cleanup of that old workhorse of a motor! By the way...I'm impressed with that parts washer! :)
Thank you very much!
Nice work Gary, looks great!
Thank You, I appreciate it. Gary
Great tip on the push bolts!
That was an awesome job! Love it!
Thank You Harold
You did a fantastic job. Looking forward to seeing that beast make chips. Cheers
Thank you Mike
Cool video!
This was awesome to watch Gary! Great job!!!
Phil, appreciate the kind words. Thank you. Gary
You did a nice job, I used to work in a rewind Shop years ago. Sometimes companies would have us put in grease Xerx for the bearings and weep hole with a plug in the other hole. We would unshield the bearings on one side Then they could Add grease as needed. my understanding was it kept the inside from getting all greased up and extended the life of the bearings. When you regrease the bearings you would pull the plug and let the old grease pump out.
Another educational video Thanks Gary
Thank you Dan
Such a pleasure, thanks for posting
Glad you enjoyed it. Gary
Threading the holes of the end bell is a great idea.
What a beast of a motor!
Wow Love ir. You make it seem simple, which it is.
Thank you! 😊
Gday Gary, back to new again, the parts wash is a brilliant machine to have handy, great job as always mate, Cheers
Thank you Matty, always nice to have you stop by the channel.
By the way, your crane project came out great. Gary
Awesome job Gary!!!!!
Thank you Danny
Great video, I like the way you get right after it, and I'm a big Monarch lather fan. Oh BTW OX sent me, now I owe him too!
Welcome aboard! I hope you find my videos interesting. Gary
Great video...! Cheers from Canada...!!!
Thank you Daniel
Nice work again, that cleaner was wort it's toll
A jacket on a 100 degree day!! Wow what a man lol
Nice work! Respect!
Thank you
Nice job, Gary. That's indeed a heavy piece :)
Thank you Michael
sounds great - didn't notice any vibrations.
Your video’s always impress me. What ever your employer pays you, it is not enough.
Carl, I will show your comment to my boss. LOL
Thank you for the kind words. Gary
Came up real nice Gary
Thanks Joe
Thanks for the video
Old iron and woods creek on the same day…..woohoo
Very Nice.
VERY NICE JOB.
Thank you Don
That was great watching that big old motor coming back to life. Nikola Tesla did a fine job when he came up with induction motor!
Mark, thank you. Really appreciate you taking the time to check out my video. Gary
Good job ol timer.
Nice job!.
Thanks!
Omg I need that parts washer!