SKODA FABIA A-Pillar Panel BONNET Release Base Fix (MK1 99-07)

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 พ.ย. 2024

ความคิดเห็น • 26

  • @joetheblowjoetheblowdave968
    @joetheblowjoetheblowdave968 4 ปีที่แล้ว +6

    Really great help - You're the man.

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว +2

      Thanks, Yes, I am indeed a man :-) Glad to be of help :-)

  • @Ikaruszaki
    @Ikaruszaki 4 ปีที่แล้ว +1

    I just installed a central locking system in my Skoda Fabia, and it was so helpful that you practically made a video on how to remove every single part of this car. Thank you!

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว

      Glad to be of help my friend, There is still more to do :-)

  • @massineke998
    @massineke998 2 ปีที่แล้ว +1

    You won a new subscriber mate, thank you so much for the help ❤️

    • @HatBoyHarvey
      @HatBoyHarvey  2 ปีที่แล้ว

      Thanks for the sub, glad to help, that's great :-)

  • @dra07
    @dra07 5 หลายเดือนก่อน

    Thank you for the really great detailed information. It was super helpful. You rock :D

    • @HatBoyHarvey
      @HatBoyHarvey  5 หลายเดือนก่อน

      Well thank you too, that's cheered me up, appreciated :-)

  • @getyerspn
    @getyerspn 4 ปีที่แล้ว +1

    Great video ...my Passat has the same problem and the part looks the same.

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว

      Thanks, hope you get it sorted :-)

  • @peterbenc8397
    @peterbenc8397 4 ปีที่แล้ว +1

    Very got video Harvey👍👍👍
    Thank you 👍👍👍

  • @davepusey
    @davepusey 4 ปีที่แล้ว

    Is the bonnet closing properly? Looks like he has a large gap above the headlights and below the grille.

  • @branejankovic5879
    @branejankovic5879 4 ปีที่แล้ว

    Great!

  • @sergeyenigma5841
    @sergeyenigma5841 4 ปีที่แล้ว

    Красавчик!! Всё супер!!!

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว

      спасибо, рад что тебе понравилось :-)

  • @margaretwilson1539
    @margaretwilson1539 4 ปีที่แล้ว

    Thank you.. 😁

  • @lefteris3881
    @lefteris3881 4 ปีที่แล้ว

    can you please make a video how to replace door stopper. Tried to do it but couldn't find how to remove it.. driver and passenger side.

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว +1

      Thank you, will put it on the list :-)

    • @lefteris3881
      @lefteris3881 4 ปีที่แล้ว

      @@HatBoyHarvey thank you!

  • @arislaskarakis7563
    @arislaskarakis7563 4 ปีที่แล้ว

    hello ma friend i just want t ask y some things ..if you know better ..
    1)i got problem with the locks ..its lock and unlocks by itself ..or its not lockin all the doors from the drivers door as it must doin ...so i lockin the 3 doors from the passengers door ..and the drivers door alone ... the lock mechanism needs change ?? or its something else ?
    2)do y know if the front bumper of a skoda fabia vrs or rs 2004-6 model i think can fit to mine ?? i got a skoda fabia sedan 2002 model .
    3)can i paint the interior plastic panels ?? i got the same color as y ..that light grey ..i want to paint them black or dark grey something like that . If i can what color should i use ??? thanks for your time ..hope you can help me .

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว

      1) If the door lock is old and never been changed then that is a good place to start, but have a look at the lock barrel in the door first as they can effect things by sticking as they don't get used much. take it out clean it up a nd put back. Also lots of other things effect the central locking like low power batteries/car/fob, damp weather and poor connections
      2) I would think they do, but not seen it. The rear wouldn't fit on a combi as the bumper is longer.
      3) Don't paint the interior it will wear off in my humble opinion, get a donnor car's panels, would be my advise, if you want the black.

  • @andrejz.1156
    @andrejz.1156 4 ปีที่แล้ว

    Hello Harvey, I want to ask about my broblem that I have with rust right behin front wheels mudguard, there is a place where a dirrt and mud gets and it gets all mushy and soggy and it rusts there. I just found out about this place when I spot the rust outside of it. My question is how do i get a side front bumper down so I can clean the rust and put som spray over it. And one more question do you have a video of how to remove some rust it would realy help me.
    Here are the photos.
    ibb.co/7YWTcdw
    ibb.co/CsgWZKK
    ibb.co/87j232M
    ibb.co/fx7HmXv
    ibb.co/pwBK1d4
    Also I just fond out about this problem becouse I bought out the car like 2 years ago and did not pay attention to these small spots of rust.

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว

      Nice photos. this area is the most common spot for fabia rust, mine too. Mine, believe it or not is as bad, if not worse, so I will have to do something about it too. you need to dry it out and what I do is wire brush all the rust away (with a wire drill brush), down to the bare metal, treat it with rust inhibiter, paint it with zinc base paint, then underseal on none visible parts. If you are unlucky and can punch holes in the metalwork then it will need welding as it is a structural part of the car. From the photos, you may just get away with painting it up. The plastic comes off after undoing all the bolts with the wheel off. I've left mine too - must do it soon! :-/

    • @andrejz.1156
      @andrejz.1156 4 ปีที่แล้ว

      @@HatBoyHarvey I thin ktaht it would be a good idea to drop a front bper and the side bumper above the wheel too so you can get easy acces to all of the rust, becouse if you left a portion of rust that you can not acces there the fix is kinda ponitles becouse it will start rusting there and spread out. Also to prewent mud from getting there you could add some sealant like silicon betwen the plastic muddguard and that plece where debree gets so it would make a longer lasting fix. I look forward to fix this rust problem I will give you upadte but dont know when.