SKODA FABIA Front Wing removal/refit (Mk1 99-07)

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ส.ค. 2024
  • In this video I show you how I removed and refit the Front left wing panel on a Skoda Fabia MK1 (99-07) which is similar to other VW/Audi/Seat/Skoda models
    Front bumper removal/refit • Skoda Fabia REAR BUMPE...
    Inner plastic wheel arch liner • SKODA FABIA front Whee...
    front wing bolts and nut M5x16 10mm Torque 8Nm
    Bumper wing clips
    Right 6Y0807050A
    Left 6Y0807049A
    RS Right 6Y0807050C
    RS Left 6Y0807049C
    Sealant: amzn.to/3i2hivy
    Please Like this video:👍 • SKODA FABIA Front Wing...
    Please subscribe to this channel:👍 goo.gl/eubNMd
    Please share this video:👍 • SKODA FABIA Front Wing...
    Follow me on Twitter:👍 / hatboyharvey
    Buy Harvey a Coffee: ko-fi.com/hatb...
    I thank all you guys for watching 😎. Please let me know if this video helped you and what you think in the comments below and don't forget to like, share and subscribe for more escapades of HatBoyHarvey in the next video release,
    (Oh and he’s the rabbit in the video if you’re wondering)
    The content of this video is for information and entertainment value only and it's creator makes no claims, promise or guarantees of it's accuracy, coverage, instruction or adequacy of the procedures contained therein.
    HatBoyHarvey assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
    HatBoyHarvey recommends correct safety practices when working on motor vehicles, vehicle lifting tools, axle stands, hand tools, electrical equipment, chemical, products and consumable parts, lubricants or any other tools, equipment, chemical product and consumable parts, lubricants seen or implied in this video.
    No information contained in this video shall create any expressed or implied warranty or guarantee of any kind of expected result including any injury, damage or loss that may result from improper use of the information contained in this video and the use of any tools, equipment, seen or described in this video and is the sole responsibility of the viewer and user and not the creator of this video and HatBoyHarvey.
    Music: Race_car / youtube_audiolibrary / also Audionautix is licensed under a Creative Commons Attribution license (httpscreativecommons.orglicensesby4.0)
    Lemon Fight - Stronger (feat. Jessica Reynoso) [NCS Release].mp3
    • Lemon Fight - Stronger...

ความคิดเห็น • 71

  • @tonymacdonald2870
    @tonymacdonald2870 4 ปีที่แล้ว +18

    Love your videos. what you do is incredible, and always helpful even if not needed right now. many thanks from a MK1 owner.

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว +3

      Much appreciated, Glad you like them. They will always be there to help anyone, which engine model have you, any issues? :-)

    • @tonymacdonald2870
      @tonymacdonald2870 4 ปีที่แล้ว

      @@HatBoyHarvey mine is 07 TDI 100 Estate 1893cc. I never had any issues with it, passes mot no problems. next one is 22/11. I watch all your videos. these cars are worth ever penny payed for them.

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว

      Yes I agree, worth every penny; Estate great. Watch out for the sills rusting though as mine has started to do this (03 car) :-)

  • @fotisparolas7732
    @fotisparolas7732 4 ปีที่แล้ว +9

    Very good video, as always. Appreciate that you didn't "cut" your minor mistake with the soundproofing piece. Keep it up man.

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว +2

      Thanks, yep it fell out, but not sure which way it goes back in, or with any confidence what it is actually for - I put it back with the curved section facing down - baffling - doesn't seem obvious to me !?

  • @filipstrojek6485
    @filipstrojek6485 ปีที่แล้ว +2

    Thanks for making that kind of content mate you have helped me a lot and saved me load of money working on my skoda

    • @HatBoyHarvey
      @HatBoyHarvey  ปีที่แล้ว +1

      You're very welcome, glad to help :-)

  • @ruimvp
    @ruimvp 4 ปีที่แล้ว +3

    Another superb piece of this form of art.

  • @joronyhanma
    @joronyhanma 10 หลายเดือนก่อน

    Appreciate your videos a lot will replace mine in the next days. Greetings from Bulgaria 🇧🇬

    • @HatBoyHarvey
      @HatBoyHarvey  10 หลายเดือนก่อน

      Vie ste dobre doshli. Glad to help :-)

  • @jancicvarek160
    @jancicvarek160 ปีที่แล้ว +2

    Very good, thank you, Hat Boy. 👍😀

  • @matthardy6328
    @matthardy6328 11 หลายเดือนก่อน

    Great video Harvey, but I have to say…… your shoes need replacing more than that wing. 😂😂😂. Good informative videos. Keep em coming.

    • @HatBoyHarvey
      @HatBoyHarvey  11 หลายเดือนก่อน +1

      YEP, have now replaced those with some recycled ones I have borrowed and repaired from my uncle Bob! :-)

  • @sergrey260
    @sergrey260 2 ปีที่แล้ว

    Супер, я готов отдать свою машину в ваши руки, вы лучший.

    • @HatBoyHarvey
      @HatBoyHarvey  2 ปีที่แล้ว

      Спасибо за ваши добрые слова :-)

  • @ngkpietia
    @ngkpietia 21 วันที่ผ่านมา

    Udało mi się wymienić bez zdejmowania koła. Zamiennik z Tajwanu kupiony na allegro za około 500 zł. Kolor dobrany dobrze.

    • @HatBoyHarvey
      @HatBoyHarvey  20 วันที่ผ่านมา

      Great, tak, można to zrobić bez zdejmowania koła, ale łatwiej to zrobić za pomocą śrub tulei :-)

  • @alex43111
    @alex43111 3 ปีที่แล้ว +1

    The dirt gathering there is a common problem in the octavia mk 1 and 2 also.

  • @user-oe2sw6xo7g
    @user-oe2sw6xo7g 6 หลายเดือนก่อน +1

    Дякую за інформацію

    • @HatBoyHarvey
      @HatBoyHarvey  6 หลายเดือนก่อน

      будь ласка :-)

  • @ashl3yow3n
    @ashl3yow3n 4 ปีที่แล้ว

    wicked number plate and your videos been so helpful to me

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว

      Absolutely. Glad my videos have helped you :-)

  • @marsiseret7140
    @marsiseret7140 2 ปีที่แล้ว +1

    Great vid!

  • @paulandrews3785
    @paulandrews3785 3 ปีที่แล้ว

    Good video my man
    Just painted a new wing on vrs will fit to day some point think the fome is a sound deadening took both out worked on lots of mk4 golfs and thay rust In this area but the Fabia s seem to be ok
    Just got rid anyways
    Keep up the great work 😉job dun rite as always

    • @HatBoyHarvey
      @HatBoyHarvey  3 ปีที่แล้ว

      Thanks, mine's rusting at the bottom a bit and the sill needs welding, but haven't got round to it yet. Did you have your wing sprayed or did you do it yourself and if so what did you use?

    • @paulandrews3785
      @paulandrews3785 3 ปีที่แล้ว

      @@HatBoyHarvey
      Did it my self 2k base coat and lacquer magic black bumper needs TLC to lol..😉mite have to weld same bit on mine to haven't took it off yet?!!! love your vids have helped me out good knowledge on the fabia s cheers

  • @pavelozdani439
    @pavelozdani439 3 ปีที่แล้ว

    thanks for the great video - it helped me a lot

    • @HatBoyHarvey
      @HatBoyHarvey  3 ปีที่แล้ว

      Glad it helped you, thank :-)

  • @RandomClips27.
    @RandomClips27. ปีที่แล้ว +1

    Is this the same for the FABIA AMBIENTE 16V 100 MK 1 Thanks

    • @HatBoyHarvey
      @HatBoyHarvey  ปีที่แล้ว

      Same wing, slightly different bumper

    • @RandomClips27.
      @RandomClips27. ปีที่แล้ว

      @@HatBoyHarvey ok thanks 👍👍

  • @user-is3jv7dw3z
    @user-is3jv7dw3z 9 หลายเดือนก่อน

    The t shape piece of foam which fell out how does it fit back in and which way up does it go? My dad is trying to work it out but is stumped so any help would be appreciated thanks

    • @HatBoyHarvey
      @HatBoyHarvey  9 หลายเดือนก่อน +1

      I don't know either, it just fell out. I believe that the base of the T is meant to rest on the plastic liner and holding it in place stopping it flapping and deadening any vibrations. That's how I put it back. If you slow the video down you can see how it dropped out. Hope this helps and thanks for asking :-)

  • @albertikupper
    @albertikupper 4 ปีที่แล้ว +1

    YES I NEED THAT THANKS YOU

  • @lukelukas42
    @lukelukas42 4 ปีที่แล้ว

    hi, i like your videos really nice really informative. would you consider making video about skoda fabia windscreen washer jet, because of they are fixed plastic panel, once panel removed then they lost aliment setting to windscreen ,therefore it is almost impossible get right spray pattern on windscreen again. Thanks

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว

      Thanks, glad you like them, the jet washers don't adjust as far as my experience goes. Mine were great when new for the first five or so years, then they began spraying badly and like you I couldn't adjust them well enough to get the great spray pattern back. I replaced mine with cheaper none oem ones which were naff. Never got round to buying two new oem ones which is the way to go in my opinion or change them for some other adjustable make/model from another car that can be made to fit, When i find some good ones I'll do a video, thanks :-)

    • @24579william
      @24579william 3 ปีที่แล้ว

      i replaced my jet washers, just go to skoda or your local TPS. cheap and easy.

  • @draganbogicevic2934
    @draganbogicevic2934 4 ปีที่แล้ว

    fine job mate

  • @matthewbaxter277
    @matthewbaxter277 4 ปีที่แล้ว

    Great helpfull vidio as allways 😊👍

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว +1

      Glad you think so, I've still not done the welding :-)

  • @branejankovic5879
    @branejankovic5879 4 ปีที่แล้ว

    Great video!

  • @knowyourenemy66
    @knowyourenemy66 ปีที่แล้ว +1

    Very helpful but removing the bumper and wheel is not needed. I removed the fender in 43 minutes with simple tools and no experience. No bumper removal or lifting the car. Also, how do people work with these protective gloves?🙄

  • @adnanabay
    @adnanabay 4 ปีที่แล้ว

    Great job bro.

  • @pilinhamole69
    @pilinhamole69 3 ปีที่แล้ว

    Someone know the name of the glue used to seal the side wing?

  • @TheConsettcowboy
    @TheConsettcowboy ปีที่แล้ว

    The piece of foam that fell out of the wing is sound deadening. I wouldn't put it back on the car because thats how the panels rot away.

  • @sergeyenigma5841
    @sergeyenigma5841 4 ปีที่แล้ว

    Красавчик!!!

  • @akidkhaled9161
    @akidkhaled9161 3 ปีที่แล้ว

    Perfekt. Thanks

  • @ju94160
    @ju94160 3 หลายเดือนก่อน

    ❤️

    • @HatBoyHarvey
      @HatBoyHarvey  3 หลายเดือนก่อน

      My pleasure :-)

  • @ayoubzay4192
    @ayoubzay4192 4 ปีที่แล้ว +1

    i have a skoda fabia but motor is golf 3

  • @sibinspasojevic3102
    @sibinspasojevic3102 4 ปีที่แล้ว

    One more great video sir! I have a question if you find the time: I have a Skoda Fabia like yours 1.4 16 valve 100 bhp 2004. During driving when I press the gas pedal the asr,epc and check engine light go on at the same time. Also a few days ago oil started mildly leaking from the crankcase breather. Have you encountered such a problem? Thanks in any case.

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว

      You're very welcome. Mine is the 1.9 8 valve pumpe duse diesel, but I believe yours has high engine balance pressures due to only having 3 cyclinders so cleaning the crank case breather system and fix any 'leaking' pipes/connections to work correctly should help here. there are a number of pipes none return valves and an oil separator half way down the engine block, probably on the back of your engine which get blocked. fairly important on 3 cyclinder engines. I would do this first and see if the lights go out.

    • @sibinspasojevic3102
      @sibinspasojevic3102 4 ปีที่แล้ว

      @@HatBoyHarvey the engine is a four cylinder like the one that went in to the Golf mark 4 if i'm not mistaken. I will check that. Is there i filter inside the casing? That's my last question😀

  • @jordanthomas6890
    @jordanthomas6890 4 ปีที่แล้ว

    What are the wheel arch lineing screws call

    • @HatBoyHarvey
      @HatBoyHarvey  4 ปีที่แล้ว +1

      vw large flage torx screws

  • @rabnawazkhan1837
    @rabnawazkhan1837 2 ปีที่แล้ว

    Nice one sir

  • @user-qi7lh8ne1c
    @user-qi7lh8ne1c 4 หลายเดือนก่อน

    Я каждую весну снимаю подкрылки и вымываю кузов от грязи, соли и тд.

    • @HatBoyHarvey
      @HatBoyHarvey  4 หลายเดือนก่อน +1

      спасибо, это такая замечательная идея. Мне бы хотелось подумать об этом до того, как ты сказал, что сделал это. это должно стать весенним распорядком дня во многих странах с северным климатом Европы и Америки :-))

  • @pavelvalenta9207
    @pavelvalenta9207 2 ปีที่แล้ว

    👍👍👍👍

  • @vmarh66
    @vmarh66 3 ปีที่แล้ว

    Так и не понял зачем он крыло снимал?

    • @HatBoyHarvey
      @HatBoyHarvey  3 ปีที่แล้ว

      inspect the rust on the wing/sill bottom, which needs welding now :-)

  • @sergrey260
    @sergrey260 2 ปีที่แล้ว

    Жаль что нас разделяет расстояние, учитель

  • @paxvobiscum8859
    @paxvobiscum8859 3 ปีที่แล้ว +1

    👋👍🙋🇵🇱💪🌞🌞🌞

  • @MrocznyTechnik
    @MrocznyTechnik 3 ปีที่แล้ว

    Dear Fellow Skoda Fabia Mk1 users. I must worn you. This what I fund on my MK1 2005 Combi:
    ibb.co/cLb6xbM
    ibb.co/6WGt6S9
    ibb.co/3kv6X1L
    This crap was hidden under what looked like factory sealant, thick rubberish layer in body color.I managed to peel this hole with bare fingers.
    Holes are on both sides, they are located at jack-stand support points. Sils are in PERFECT condition, no visible rust anywhere...and such crappy surprise. I will talk with some specialists tomorrow, but I'm worried, this is structural damage and time to say goodbye is soon. Maybe I had bad luck, and there was some factory error with corrosion protecting, maybe jack stand damaged sill-rant avd rust done it's nasty job over time. It's sad to keep a car in perfect mechanical condition and find something like this during routine tyres change :(

    • @HatBoyHarvey
      @HatBoyHarvey  3 ปีที่แล้ว

      Thanks, that looks horrible, I feel you pain, the holes look like they go deep and are going to be hard to fix. Hope mine isn't the same when I get around to a closer inspection :(

    • @MrocznyTechnik
      @MrocznyTechnik 3 ปีที่แล้ว +1

      @@HatBoyHarvey Check it ASAP. Maybe is not to late in your case. It's shame to scrap the car, that you cared about so much.. I'll consult local skoda expert (who rebuilds Skoda 105 just for fun). According to bodywork manual, structural rails are away from this damaged place, so there is a hope. Take care!