I know its a stretch, but could you maybe do a video how you install ALL of your mods. Im trying and getting half the way but I keep crashing my game and having to reinstall. You seem to have all your sorted. Thanks for the amazing content
Very late i know, but same issue, i get the GWX mod fine, but not the ARB gui mod, i can play the tutorial missions fine with arb but nothing else it just crashes, wish someone could make a full video tutorial
@@Cool_Persian_guy ah damm brother i really wish i knew, i have a smaller res monitor I wish the community would be kinda more involved with how to mod this game
Hoping Wolfpack345 might be able to help with an issue I've got with this mod. I've installed it (also done TychoPatch and Supplement to V16b1 as laid out in instructions) but the game keeps crashing whenever I try to start a new campaign after I've clicked to Start on the map board in the captains office. Load bar gets to about four fifths full before crashing back to desktop. I seem to be able to start single missions ok which is adding to my confusion. Any help would be much appreciated! I am using GWX3.0 and SH3 Commander as well.
I am so confused and really could use a hand with modding. I downloaded clean version of SH3 from steam onto my pc running windows 10.. Now I would love to run it with the ARB mod. Question is when I go to the subsim site, I have no clue to which files are needed and installed. It mentions downloading the Tychosh3 patch, but the link for it lists 4 variants and one is not a steam version of sh3. Would greatly appreciate someone helping an old timer with these new tricks. Thanks!
Is there a chance of you 1) Doing a tutorial for those manual targeting dials around the periscope (not the TDC but those three brown circles) 2) Doing another SH3 LP or a SH4 U-Boat missions one? Thanks
Would you considering showing up how stuff works? I arrive from Rafael GUI, which included a nice pdf manual, but ARB doesn't, and I can't find any instructions. Couldn't find much info on forums. Also downloaded Ahnerberbe but also no pdf... Specifically I can't wrap my head around the angle bow, the attack periscope watch speed estimator (I think I sort of get it, but can't figure out why a 1700 mts the reading gets closer to 1000 m pe.). Also the astrolabe... I don't know, lot of different things. Again, probably you did explain this and I missed you, after all I discovered your channel from the early tutorials (stayed because of your improvised storytelling skills)
hi Wolfpack345 can I ask you a question? I installed ARB widegui but the periscope reticle display is different from the one you show in the video. How can I get it the same? if you help me I thank you.
Recently got into Silent Hunter, love this mod but i wish the GUI was bigger. i have bad eyesight even with glasses and i need to focus so hard to see what icon i am clicking on in the bottom left or see how fast i am going without switching the Speedometer.
Only posting here because I don't use forums. I installed the mod doing everything right (at least I think) but the ruler and protractor tool are a bit off to the right. As in the gui elements are off to the right and not where my mouse is. Is there any fix for this or did something mess up somewhere else?
@GMetzo Same... Are you both running Windows 10? I have a suspicion that Win 10 doesn't recognize the c command "binpatch" and so you get the error "'binpatch' is not recognized as an internal or external command" when trying to run the TychoSh3Patch.bat.
i know this is old teh signals are for the sluices in lsh3 , only mode ive seen them in but they are abitch to navigate take a ton of patience just to get out of port
Help me please!!!!!!!! Hi I have downloaded gwx and it ran perfect and I downloaded a widescreen mod I think it was called 1080x??? Something like that anyway I tried it and the infamous 3D engine is not working came up I went to a form on subsim and see if anyone else had the same issue and none of them did but then I went to the cfg files and where it Said full screen is was on yes so I put it to no and I started up the game via steam and the movies went and suddenly the loading screen that says sh3 all I could see of that was the top left corner and it’s in 1024x600 and it loads into the menu screen but I can only see the top of it and on top of it is just a blank boarder help me please!!!!
Hey so if you are using a widescreen mod you will have to have the fullscreen option turned on in the CFG files. Also in the CFG files make sure that the 'sycnorized' option is set to yes , that may fix your issues
Hi, I just installed ARB using your video's as reference, using JSGME , almost everything works well except the plot map Brest base is now in the middle of at a guess, Czech..? have I missed something?
ive com to the conclusion that i wont be able to mod. tried several times and just get lost or screw things up to the point i have to wipe my computer and start over
Hi, I have a couple of questions about the game. 1. Where can I find what my mission objective is? 2. How can I dock a ship? 3. Do you know how to fix the menus special tab(where all the side and front icons are for the ships hull)?
Sorry for the late response! 1. Your mission objective can be found at the start of the patrol. it will tell you what grid to go to. 2. You can dock by just heading to your home port and pressing ESC and it will say 'Dock at Kiel' for example 3. The specials menu should always show the side emblems... is it not working for you?
thank you for responding. My specials menu isn't working I think the problem is that I have downloaded the mods in the wrong order because when I got the game the menu was working fine but my maps cities names where all green so I didn't know who the enemy was so I downloaded the mods in a different order but that didn't fix anything the green city names are still there and the menu is still not working. My mods are: gwx, arb widescreen gui, TKSS18 German U-boat Compilation and FM_NewInteriors v2.1D.
Does someone have a step by step list on how to install it so it actually works on Windows10? I have got the GWX 3.0, JSGME and SH3 Commander. I had some issues with it CTD on loading campaign, but got it to work well eventually. Im runing it in Windows XP SP2 compatibility mode as an administrator. I would love to get this MOD working. Ive tried several times. As far as I can understand I have installed it correctly as per instructions in the readme files and descriptions on subsim.com, but it keeps crashing to desktop in the campaign loading screen. I think one of the reasons is that I'm having troble installing the Thycho patch. When ever I run the thycopatch.bat the command line gives an error message with some letters and numbers. I dont quite remember what the errormessage is as I cant be bother to install and uninstall everything for the 100th time just to find out. I hope some of you know what Im talking about. If not I will try to install it onse again to get the errorcode. I have also tried to patch the sh3.exe with the 4gb patch but it doesnt help. I have also given Bitdefender all premissions for all the relevant files and executables. I would love to enjoy this MOD so any help will be much apreciated! Love you patrol videos Wolfpack! :)
Found out what it was if any of you have the same problem. The issue was with the stock EXE file itself that wouldent be patched. Downloaded a new one from subsim.com and now it works like a charm! :D
@@mvpno1726 Sorry to reply to a months old comment, but how did you manage that? The only way I found searching on subsim was to patch it with HSIE first, which makes it incompatible with GWX. If you could point me in the right direction on where to find how to fix this I'd be much obliged.
@@zupaniccarr4686 No worries. Its been a whle since i had this issue so I dont quite remember how it was. But is your issue the same as described in post no. 12 in this thread? If so maybe this is the solution for you. www.subsim.com/radioroom/showthread.php?t=231140
Im having the same problem. Tring to fix it last 2 days. As much i understand its because i use Steam. Before all this Mod i need to patch it couple of times with Tychos, H.Sies... And then try this mod
Hello Do you know how to fix the gramophone? It will crash to desktop every time I use it. EDIT: Also the link in the description doesn't work. it says (No Thread specified. If you followed a valid link, please notify the administrator)
Everytime I download any mod my anti virus removes it.Are these mods viruses?I mean obviously the download you have is not,but how do we know a trusted source?
Hi again So I have a new problem with this mod. I had gwx gold and I downloaded this mod but the map doesn't work its like in split screen and all the city names are off. I have downloaded the 4gb patch and I'm using the Windows XP package.
Hey dude! i know, this question is quite old to be asking rn, but i got silent hunter 3 yesterday and downloaded this of for the resolution, but the stupid thing is that the map shows as a weird split screen or something, any help? Kind regards Nils SCREENSHOT: cdn.discordapp.com/attachments/333605934096187403/715489272907563008/54ecc0a12691caae8230620d9adaed3b.png
@@mellamomellamo3512 Heya dude, i got a fix for it www.sendspace.com/file/57cxse Download the V16B1-Patch-installed.7z file when downloaded open it and drag the SH3.EXE (or whatever it is called) into ur Silent hunter 3 folder and then when a screen pops up to ask if u want to replace it, replace it When replace, run the TyschoSh3patch.bat file (also located in your silent hunter 3 folder) and a screen should pop up what looks like this discordapp.com/channels/@me/715544298824794136/715548914589237296 When done just click any key, and that should fix it! o7
@@nilskrijnders6896 I actually literally just managed to fix this by doing some management. I uninstalled the game and installed again for a clean launch,then i installed grey wolves,then commander,then i patched the steam exe with the hardcore patch After that i patched the new exe with tycho's patch,and then with the 4gb patch,saving a backup of all exes
With a 1440p monitor the game and text just looks too fuzzy when downsized to this 1080p mod. I hope at some point there will be a 1440p mod for SH3. In the meantime SH5 with the Grey Wolves mod is awesome and a great substitute for SH3.
I copied and pasted the files just like the readme said but I am not getting the new resolution. It is actually worse. When I try to run the tycho bat inside the game folder it says fail. Anyone else had this issue?
Update: I got the Thycho patch to work and I ran the 4gb patch as well. I still am not getting the resolution. Could anyone point me to a comprehensive guide to get this to work. I am not sure what to do next and the mod page does not help.
... - - - ... , If someone with experience in this reads this comment please help, I have a problem with this beautiful mod. At the time of opening the map and the TDC The map is divided into 2, which prevents me from traveling in a pleasant way.
@@Wolfpack345 ok so i got the patch to work but now im confused, it says "Extract the Supplement to V16 Mod archive" in the instruction read me but idk where that is. i tried launching the game with the patched exe but it just crashed at the loading screen so i think i did something wrong.
Yeah I just installed and got the same issue with Tycho saying "a8e75: 0 0, but currently 42 fail" Is there a way to fix this. I finally got everything to work then I saw the map was broken.
@@Wolfpack345 Awesome, thanks for the response. Would you mind showing your mod list like you have done in other videos? It has helped me in the past by having a visual aid to reference. Thanks
Here is the Full list! It's a tad long... Thomsen's Sound Pack V3.2cg Rbs1_SH4_Effects_GWX_30_71 Rapt0r's Uniforms V2.0 [Grey] Rapt0r's Uniforms V2.0 [Grey - All Leather] Patch SHIV U-Boat Missions-Flaggen für SHIII Rubini´s Underwater dust&plancton v1 Torpedo_HAHD_1024_GWX WB's Renown Replacement M.E.P v6 M.E.P v6- VisualSensors for GWX3 Optional - ShipVanishingHull for MEP v6 Optional - FSF for MEP v6 GWX - Open Hatch Mod TKSS18 German U-Boats Compilation No Eagle (Edited) German U-Boats Compilation 2 (only VIIB & VIIC models by WISE) 7b-1940-Weiss U-Boot 7c-II FixAllSubGWX ARB WideGui 1920x1080 v3.0 Adaptation for English & Deutsch Radio Deutschland Radio England b25_Louder_Diesels Moon_light_mod Sh3_volumetric_clouds&fog_V2.2 Skin U-73 VIIB-Ahnenerbe Skin U-96 VIIC-Wise Supplement to V16B1 (JSGME) TychoSh3Patch_v3
Here is my FULL list... Like I said GWX, MEP, TKSS and the UI mod are the main ones and I would start small with those. The rest is just fluff. Sorry it's a bit intimidating Thomsen's Sound Pack V3.2cg Rbs1_SH4_Effects_GWX_30_71 Rapt0r's Uniforms V2.0 [Grey] Rapt0r's Uniforms V2.0 [Grey - All Leather] Patch SHIV U-Boat Missions-Flaggen für SHIII Rubini´s Underwater dust&plancton v1 Torpedo_HAHD_1024_GWX WB's Renown Replacement M.E.P v6 M.E.P v6- VisualSensors for GWX3 Optional - ShipVanishingHull for MEP v6 Optional - FSF for MEP v6 GWX - Open Hatch Mod TKSS18 German U-Boats Compilation No Eagle (Edited) German U-Boats Compilation 2 (only VIIB & VIIC models by WISE) 7b-1940-Weiss U-Boot 7c-II FixAllSubGWX ARB WideGui 1920x1080 v3.0 Adaptation for English & Deutsch Radio Deutschland Radio England b25_Louder_Diesels Moon_light_mod Sh3_volumetric_clouds&fog_V2.2 Skin U-73 VIIB-Ahnenerbe Skin U-96 VIIC-Wise Supplement to V16B1 (JSGME) TychoSh3Patch_v3
@@Wolfpack345 neat! thanks Kaleun! I got most of this but still thinking on actually using compilation 2 - doesn't it have issues with upgrading the U-Boat?
Hey, so ive been trying to mod this game for a while and came to many troubles. I downloaded gwx 3.0 gold and it kept crashing. After about a month later I fixed it but now it keeps crashing sometimes from gwx 3.0 gold I think. But now when I enable this GUI it crashes constantly I have most of your mods downloaded. Do you know any patches I can put in my game with gwx 3.0 gold. When it kept crashing i can run the tutorials though btw. So im just wondering if you have any suggestions on how to fix these crashing I looked most of them up and nothing worked. So im wondering if i have to have a patch. I understand you dont play this game anymore but yeah, Thanks!
Yeah sure man I can help! I still play sh3 I just don't have a let's play going atm :) Just give me your full mod list. Also 1-Are you using the 4gb patch? 2- did you use the Tyco pach before enabling this mod?
@@Wolfpack345 My mod list is WarAcecampaign 5.0 Tycho patch sh3 commander ricks_gwx_rec_man_final OLCS gwx sh3 searchlight beam LifeBoats and debris FM_Newinterior ARB WIDESCREEN GUI 4gb patch thomson sound pack The ones I have activated are WarAceCampaign 5.0 Tycho3patch WAC 5.0 campaign atlantic baltic v1b6-patch kit thomson sound pack ARB WIDESCREEN GUi I changed from gwx to the war ace campaign today to see if it works and it still doesnt
@@Wolfpack345 and now I disabled the arb gui mod and it work but I want the gui to work because the default one isnt really that good and the tycho patch was enabled before I enabled the gui
@@trevorsmith1076 And you patched the sh3.exe with the 4gb patch? You don't activate the 4gb patch via jsme. Same with the tycho patch. Also did you completely reinstall sh3 before switching to WAC from gwx?
Damn.. you may have actually gotten me to move away from Ahnenerbe's Widescreen GUI.. that map view is just gorgeous! (Incidentally, it makes me cringe every time you try to say Ahnenerbe. The pronunciation is more like Ann-en-urba.) Also, a big YES vote for a Scapa Flow episode.. I've done a scouting mission to Scapa Flow in the early game, just before war is declared (it was a lot of fun cruising around on the surface, thumbing my nose at the British warships while I mapped out all the shore defences), but I'm yet to try an attack on the Royal Oak.. it would be a lot of fun to see you actually do it.
Yeah I really like the map. It being wide screen is awesome. also sorry about the pronunciation LOL I can see now why it was wrong. I think I will do a Scapa flow episode in the near future.
I tried this mod a million times and it always crashes when the mission loads. I don't think these instructions are correct..... How to install: !!! FIRST MAKE A BACKUP OF SH3.EXE FILE IN THE GAME FOLDER !!! 1. Copy files in the folder ARB WideGui 1920x1080 into the game folder. 2. Copy files in the folder TychoSh3Patch_v3 into the game folder. 3. Run the TychoSh3Patch.bat
You have to get a patch, so that SH can use more RAM Space www.subsim.com/radioroom/downloads.php?do=file&id=2888 - solved the problem for me. Contact me, if you need further help with the installation
*Gigantic nazi symbol on the top left* Oh and there is also a mod that removes this little emblem down here, maybe I should do it to not piss off youtube, LOL
Thanks so much for bringing this series back. Very, very appreciated. Will definitely change to this GUI.
dude i watch you played this game today now I got you playing it 6 years ago. jesus.
Would you make a video about how to install this mod, i cant understand when i read the instruction
try this... www.subsim.com/radioroom/showthread.php?t=232178&page=11
Just added this after watching, very very nice mod. Great for more immersion in the game.
It really is a fantastic mod.
An ancient video from Wolfpack
Fantastic video, just getting into sh3 again i need this mod
I know its a stretch, but could you maybe do a video how you install ALL of your mods. Im trying and getting half the way but I keep crashing my game and having to reinstall. You seem to have all your sorted. Thanks for the amazing content
Very late i know, but same issue, i get the GWX mod fine, but not the ARB gui mod, i can play the tutorial missions fine with arb but nothing else it just crashes, wish someone could make a full video tutorial
@@ockertviljoen2810 hey man i have 1600×900 res monitor what should i do i want full screen on this res but idk how help pls
@@Cool_Persian_guy ah damm brother i really wish i knew, i have a smaller res monitor
I wish the community would be kinda more involved with how to mod this game
hi I am wondering if this mod has conflicts with GWX3 mod.I've tried Magui but seems go wrong
How do you add mods to SH3?
A new silent hunter III campaign would be nice!
Soon:)
i love the mod, i use it with NYGM, works like a charm
Yeah it is an awesome mod!
Hoping Wolfpack345 might be able to help with an issue I've got with this mod. I've installed it (also done TychoPatch and Supplement to V16b1 as laid out in instructions) but the game keeps crashing whenever I try to start a new campaign after I've clicked to Start on the map board in the captains office. Load bar gets to about four fifths full before crashing back to desktop. I seem to be able to start single missions ok which is adding to my confusion. Any help would be much appreciated! I am using GWX3.0 and SH3 Commander as well.
Hi. Why CO2 level is not restore when i reach the surface? Compressed air is recharge, battery is recharge , but C02 level still in half on gauge?
I am so confused and really could use a hand with modding. I downloaded clean version of SH3 from steam onto my pc running windows 10.. Now I would love to run it with the ARB mod. Question is when I go to the subsim site, I have no clue to which files are needed and installed. It mentions downloading the Tychosh3 patch, but the link for it lists 4 variants and one is not a steam version of sh3. Would greatly appreciate someone helping an old timer with these new tricks. Thanks!
Is there a chance of you
1) Doing a tutorial for those manual targeting dials around the periscope (not the TDC but those three brown circles)
2) Doing another SH3 LP or a SH4 U-Boat missions one?
Thanks
1) I will probably do this when I start my next SH3 LP
2) SH3 is planned! :)
Would you considering showing up how stuff works? I arrive from Rafael GUI, which included a nice pdf manual, but ARB doesn't, and I can't find any instructions. Couldn't find much info on forums. Also downloaded Ahnerberbe but also no pdf...
Specifically I can't wrap my head around the angle bow, the attack periscope watch speed estimator (I think I sort of get it, but can't figure out why a 1700 mts the reading gets closer to 1000 m pe.). Also the astrolabe... I don't know, lot of different things.
Again, probably you did explain this and I missed you, after all I discovered your channel from the early tutorials (stayed because of your improvised storytelling skills)
i followed the instruction but the game crashes when i launch a mission. I have gwx gold installed. Anyone can help me?
Same thing happened to me and I must have uninstalled and re-installed it 20 times and it still crashed.
@@georgiethumbs2438 installing 4gb patch worked charms for my game, try it
Any ideas for a 4K resolution fix? I haven't found one yet
I don't think it is possible.
hi Wolfpack345 can I ask you a question? I installed ARB widegui but the periscope reticle display is different from the one you show in the video. How can I get it the same? if you help me I thank you.
Recently got into Silent Hunter, love this mod but i wish the GUI was bigger. i have bad eyesight even with glasses and i need to focus so hard to see what icon i am clicking on in the bottom left or see how fast i am going without switching the Speedometer.
Only posting here because I don't use forums. I installed the mod doing everything right (at least I think) but the ruler and protractor tool are a bit off to the right. As in the gui elements are off to the right and not where my mouse is. Is there any fix for this or did something mess up somewhere else?
my map is split in half with this mod, any help?
@GMetzo Same... Are you both running Windows 10? I have a suspicion that Win 10 doesn't recognize the c command "binpatch" and so you get the error "'binpatch' is not recognized as an internal or external command" when trying to run the TychoSh3Patch.bat.
check the forum subsim, theres a fix for it
@@SantitariumHaze It is exactly what happens to me. How can I run the patch from the W10?
i know this is old teh signals are for the sluices in lsh3 , only mode ive seen them in but they are abitch to navigate take a ton of patience just to get out of port
Help me please!!!!!!!!
Hi I have downloaded gwx and it ran perfect and I downloaded a widescreen mod I think it was called 1080x??? Something like that anyway I tried it and the infamous 3D engine is not working came up I went to a form on subsim and see if anyone else had the same issue and none of them did but then I went to the cfg files and where it Said full screen is was on yes so I put it to no and I started up the game via steam and the movies went and suddenly the loading screen that says sh3 all I could see of that was the top left corner and it’s in 1024x600 and it loads into the menu screen but I can only see the top of it and on top of it is just a blank boarder help me please!!!!
Hey so if you are using a widescreen mod you will have to have the fullscreen option turned on in the CFG files. Also in the CFG files make sure that the 'sycnorized' option is set to yes , that may fix your issues
Thanks I’ll try
No didn’t work it just says 3D engine doesn’t work
Did you ever get it to work? GWX works for me, but when I install ARB WideGui or Ahnenerbe WideGui, I get 3D engine error too.
i can't rangefind through attack periscope, the line doesn't showup
Hi, I just installed ARB using your video's as reference, using JSGME , almost everything works well except the plot map Brest base is now in the middle of at a guess, Czech..? have I missed something?
Did you install the Tycho patch?
@@Wolfpack345 looks like he doesn't
@@Wolfpack345 Hello! So if I install that patch, the problem of the map split in half can be solved? I appreciate any help.
ive com to the conclusion that i wont be able to mod. tried several times and just get lost or screw things up to the point i have to wipe my computer and start over
How do You use the RAOB finder ? I can't find the grid to see (count) mast height (to calculate distance), ship lenght (to calculate aob). Thanks
Hi, I have a couple of questions about the game.
1. Where can I find what my mission objective is?
2. How can I dock a ship?
3. Do you know how to fix the menus special tab(where all the side and front icons are for the ships hull)?
Sorry for the late response!
1. Your mission objective can be found at the start of the patrol. it will tell you what grid to go to.
2. You can dock by just heading to your home port and pressing ESC and it will say 'Dock at Kiel' for example
3. The specials menu should always show the side emblems... is it not working for you?
thank you for responding. My specials menu isn't working I think the problem is that I have downloaded the mods in the wrong order because when I got the game the menu was working fine but my maps cities names where all green so I didn't know who the enemy was so I downloaded the mods in a different order but that didn't fix anything the green city names are still there and the menu is still not working. My mods are: gwx, arb widescreen gui, TKSS18 German U-boat Compilation and FM_NewInteriors v2.1D.
What is the date in game? If you started in 1939 you start patrolling in august one month before war breaks out That is why the cities are green.
Does someone have a step by step list on how to install it so it actually works on Windows10?
I have got the GWX 3.0, JSGME and SH3 Commander. I had some issues with it CTD on loading campaign, but got it to work well eventually. Im runing it in Windows XP SP2 compatibility mode as an administrator.
I would love to get this MOD working. Ive tried several times. As far as I can understand I have installed it correctly as per instructions in the readme files and descriptions on subsim.com, but it keeps crashing to desktop in the campaign loading screen. I think one of the reasons is that I'm having troble installing the Thycho patch. When ever I run the thycopatch.bat the command line gives an error message with some letters and numbers. I dont quite remember what the errormessage is as I cant be bother to install and uninstall everything for the 100th time just to find out. I hope some of you know what Im talking about. If not I will try to install it onse again to get the errorcode. I have also tried to patch the sh3.exe with the 4gb patch but it doesnt help. I have also given Bitdefender all premissions for all the relevant files and executables.
I would love to enjoy this MOD so any help will be much apreciated!
Love you patrol videos Wolfpack! :)
Found out what it was if any of you have the same problem. The issue was with the stock EXE file itself that wouldent be patched. Downloaded a new one from subsim.com and now it works like a charm! :D
@@mvpno1726 Sorry to reply to a months old comment, but how did you manage that? The only way I found searching on subsim was to patch it with HSIE first, which makes it incompatible with GWX.
If you could point me in the right direction on where to find how to fix this I'd be much obliged.
@@zupaniccarr4686 No worries.
Its been a whle since i had this issue so I dont quite remember how it was. But is your issue the same as described in post no. 12 in this thread? If so maybe this is the solution for you.
www.subsim.com/radioroom/showthread.php?t=231140
Im having the same problem. Tring to fix it last 2 days. As much i understand its because i use Steam. Before all this Mod i need to patch it couple of times with Tychos, H.Sies... And then try this mod
I install it and its a notepad thing I put it in the mods folder but jsgme cant find it so I cant enable it? help plz
Hello
Do you know how to fix the gramophone?
It will crash to desktop every time I use it.
EDIT: Also the link in the description doesn't work. it says (No Thread specified. If you followed a valid link, please notify the administrator)
Are you using the 4gb patch? And are you running the game as a admin? Also thankd for letting me know about the link. I will fix it
All this kind of mods dont work for me :(game crashing or still look bad on 1080p monotor. Game is Still playable but it hurt eyes.
at the risk to sound dumb but i'm not absolutely able to mod this game, is there any of you from the NYC area can help me with that?
Everytime I download any mod my anti virus removes it.Are these mods viruses?I mean obviously the download you have is not,but how do we know a trusted source?
I think I may need to check this out! Does it plays nicely with other mods?
It seems to work fine with all of my other mods. No issues so far! If you need any help message me on Discord! :)
@@Wolfpack345 Tried to install this but my virus scanner reported this mod as a virus. did you have any issues installing?
Hi again So I have a new problem with this mod. I had gwx gold and I downloaded this mod but the map doesn't work its like in split screen and all the city names are off. I have downloaded the 4gb patch and I'm using the Windows XP package.
Did you install the patch for the. Exe?
Got it working I just forgot to patch the exe file as you said.
@@IanT2001glad to hear it!
Hey dude! i know, this question is quite old to be asking rn, but i got silent hunter 3 yesterday and downloaded this of for the resolution, but the stupid thing is that the map shows as a weird split screen or something, any help? Kind regards Nils
SCREENSHOT: cdn.discordapp.com/attachments/333605934096187403/715489272907563008/54ecc0a12691caae8230620d9adaed3b.png
I've been having the same issues since i got it,all the supposed fixes i tried didn't work oof
There's also the fact that the tycho patch fails to install even if i follow the instructions
@@mellamomellamo3512 Heya dude, i got a fix for it
www.sendspace.com/file/57cxse
Download the V16B1-Patch-installed.7z file
when downloaded open it and drag the SH3.EXE (or whatever it is called) into ur Silent hunter 3 folder and then when a screen pops up to ask if u want to replace it, replace it
When replace, run the TyschoSh3patch.bat file (also located in your silent hunter 3 folder) and a screen should pop up what looks like this discordapp.com/channels/@me/715544298824794136/715548914589237296
When done just click any key, and that should fix it!
o7
@@nilskrijnders6896 I actually literally just managed to fix this by doing some management.
I uninstalled the game and installed again for a clean launch,then i installed grey wolves,then commander,then i patched the steam exe with the hardcore patch
After that i patched the new exe with tycho's patch,and then with the 4gb patch,saving a backup of all exes
@@nilskrijnders6896 But thanks
this is already in onealex isnt it
With a 1440p monitor the game and text just looks too fuzzy when downsized to this 1080p mod. I hope at some point there will be a 1440p mod for SH3. In the meantime SH5 with the Grey Wolves mod is awesome and a great substitute for SH3.
Does it work with the grey wolves expansion?
guys i have 1600×900 monitor res what should i do
Also great video
I copied and pasted the files just like the readme said but I am not getting the new resolution. It is actually worse. When I try to run the tycho bat inside the game folder it says fail. Anyone else had this issue?
Update: I got the Thycho patch to work and I ran the 4gb patch as well. I still am not getting the resolution. Could anyone point me to a comprehensive guide to get this to work. I am not sure what to do next and the mod page does not help.
... - - - ... , If someone with experience in this reads this comment please help, I have a problem with this beautiful mod.
At the time of opening the map and the TDC The map is divided into 2, which prevents me from traveling in a pleasant way.
Have you fixed it?
Do you run both ui mods together??
For me the mod has a big serious bug, I see double navigation maps, so it is impossible to play.
That is because you did not install the tycho patch properly.
@@Wolfpack345 Did a reinstall and you were right.
If I am installing GWX+this mod my game is crashes during loading mission every time. What problem?
You need the 4GB patch
@@Deadmode - I got the same problem. What is the 4GB patch?
Can you please make a tutorial video on how to install this maybe? im just to not to good with installing mods and visuals help.
Update: I’m just more confused with finding my original sh3 .exe, so far I can only find my gwx one
It should be named sh3.exe in your installation folder.
@@Wolfpack345 ok so i got the patch to work but now im confused, it says "Extract the Supplement to V16 Mod archive" in the instruction read me but idk where that is. i tried launching the game with the patched exe but it just crashed at the loading screen so i think i did something wrong.
I'm trying to install this but has been not working
Have you figured it out?
Tried to install it... Always ending up with map split in half, making it unreadable. Any sollutions ?
The Tycho patch must not have installed properly. Did you get any errors?
Qfander, have you been able to fix the map issue? If so, how?
I couldn't fix it so I installled the mod you used in your Mediterranean Silent Hunter 3 campaign.
@@Wolfpack345No errors, Tycho wouldn't open, unless the patching is supposed to be lightning fast...
Yeah I just installed and got the same issue with Tycho saying "a8e75: 0 0, but currently 42 fail" Is there a way to fix this. I finally got everything to work then I saw the map was broken.
So this mod works with Ahnenerbes 1920x1080? Or you run this mod by itself with the patch?
You are young to want to run this mod by itself with the patch
@@Wolfpack345 Awesome, thanks for the response. Would you mind showing your mod list like you have done in other videos? It has helped me in the past by having a visual aid to reference. Thanks
Sorry for this late reply! I will give you my mod list when I get to my pc!
Wolfpack345 sounds good, thanks
Here is the Full list!
It's a tad long...
Thomsen's Sound Pack V3.2cg
Rbs1_SH4_Effects_GWX_30_71
Rapt0r's Uniforms V2.0 [Grey]
Rapt0r's Uniforms V2.0 [Grey - All Leather] Patch
SHIV U-Boat Missions-Flaggen für SHIII
Rubini´s Underwater dust&plancton v1
Torpedo_HAHD_1024_GWX
WB's Renown Replacement
M.E.P v6
M.E.P v6- VisualSensors for GWX3
Optional - ShipVanishingHull for MEP v6
Optional - FSF for MEP v6
GWX - Open Hatch Mod
TKSS18 German U-Boats Compilation No Eagle (Edited)
German U-Boats Compilation 2 (only VIIB & VIIC models by WISE)
7b-1940-Weiss
U-Boot 7c-II
FixAllSubGWX
ARB WideGui 1920x1080 v3.0
Adaptation for English & Deutsch
Radio Deutschland
Radio England
b25_Louder_Diesels
Moon_light_mod
Sh3_volumetric_clouds&fog_V2.2
Skin U-73 VIIB-Ahnenerbe
Skin U-96 VIIC-Wise
Supplement to V16B1 (JSGME)
TychoSh3Patch_v3
I can beg for a modlist that works if you want me to Kaleun.
Like do you run GWX, MEP, TKSS, and this?
Yeah those are the main ones that I use. I have some smaller ones on top but those are the big ones
I'll get you the full list when I get to my pc!
@@Wolfpack345 Thanks skipper!
Here is my FULL list... Like I said GWX, MEP, TKSS and the UI mod are the main ones and I would start small with those. The rest is just fluff.
Sorry it's a bit intimidating
Thomsen's Sound Pack V3.2cg
Rbs1_SH4_Effects_GWX_30_71
Rapt0r's Uniforms V2.0 [Grey]
Rapt0r's Uniforms V2.0 [Grey - All Leather] Patch
SHIV U-Boat Missions-Flaggen für SHIII
Rubini´s Underwater dust&plancton v1
Torpedo_HAHD_1024_GWX
WB's Renown Replacement
M.E.P v6
M.E.P v6- VisualSensors for GWX3
Optional - ShipVanishingHull for MEP v6
Optional - FSF for MEP v6
GWX - Open Hatch Mod
TKSS18 German U-Boats Compilation No Eagle (Edited)
German U-Boats Compilation 2 (only VIIB & VIIC models by WISE)
7b-1940-Weiss
U-Boot 7c-II
FixAllSubGWX
ARB WideGui 1920x1080 v3.0
Adaptation for English & Deutsch
Radio Deutschland
Radio England
b25_Louder_Diesels
Moon_light_mod
Sh3_volumetric_clouds&fog_V2.2
Skin U-73 VIIB-Ahnenerbe
Skin U-96 VIIC-Wise
Supplement to V16B1 (JSGME)
TychoSh3Patch_v3
@@Wolfpack345 neat! thanks Kaleun!
I got most of this but still thinking on actually using compilation 2 - doesn't it have issues with upgrading the U-Boat?
Hey, so ive been trying to mod this game for a while and came to many troubles. I downloaded gwx 3.0 gold and it kept crashing. After about a month later I fixed it but now it keeps crashing sometimes from gwx 3.0 gold I think. But now when I enable this GUI it crashes constantly I have most of your mods downloaded. Do you know any patches I can put in my game with gwx 3.0 gold. When it kept crashing i can run the tutorials though btw. So im just wondering if you have any suggestions on how to fix these crashing I looked most of them up and nothing worked. So im wondering if i have to have a patch. I understand you dont play this game anymore but yeah, Thanks!
Yeah sure man I can help! I still play sh3 I just don't have a let's play going atm :) Just give me your full mod list.
Also
1-Are you using the 4gb patch?
2- did you use the Tyco pach before enabling this mod?
@@Wolfpack345 My mod list is
WarAcecampaign 5.0
Tycho patch
sh3 commander
ricks_gwx_rec_man_final
OLCS gwx sh3 searchlight beam
LifeBoats and debris
FM_Newinterior
ARB WIDESCREEN GUI
4gb patch
thomson sound pack
The ones I have activated are
WarAceCampaign 5.0
Tycho3patch
WAC 5.0 campaign atlantic baltic
v1b6-patch kit
thomson sound pack
ARB WIDESCREEN GUi
I changed from gwx to the war ace campaign today to see if it works and it still doesnt
@@Wolfpack345 and now I disabled the arb gui mod and it work but I want the gui to work because the default one isnt really that good and the tycho patch was enabled before I enabled the gui
@@trevorsmith1076 And you patched the sh3.exe with the 4gb patch? You don't activate the 4gb patch via jsme. Same with the tycho patch.
Also did you completely reinstall sh3 before switching to WAC from gwx?
WAC never worked very well for me you might want to check SUBSIM those guys know more about that mod than I do.
Damn.. you may have actually gotten me to move away from Ahnenerbe's Widescreen GUI.. that map view is just gorgeous!
(Incidentally, it makes me cringe every time you try to say Ahnenerbe. The pronunciation is more like Ann-en-urba.)
Also, a big YES vote for a Scapa Flow episode.. I've done a scouting mission to Scapa Flow in the early game, just before war is declared (it was a lot of fun cruising around on the surface, thumbing my nose at the British warships while I mapped out all the shore defences), but I'm yet to try an attack on the Royal Oak.. it would be a lot of fun to see you actually do it.
Yeah I really like the map. It being wide screen is awesome. also sorry about the pronunciation LOL I can see now why it was wrong. I think I will do a Scapa flow episode in the near future.
Doesn't work
Which Sub-skin mod are you using?
It is called U-73 VIIB-Ahnenerbe. Sorry for the late reply!
Hey man ! What is the best graphics mod !?
MEP is pretty good. You can find it on Subsim.
@@Wolfpack345 thanks man, will have a look !
I tried this mod a million times and it always crashes when the mission loads. I don't think these instructions are correct.....
How to install:
!!! FIRST MAKE A BACKUP OF SH3.EXE FILE IN THE GAME FOLDER !!!
1. Copy files in the folder ARB WideGui 1920x1080 into the game folder.
2. Copy files in the folder TychoSh3Patch_v3 into the game folder.
3. Run the TychoSh3Patch.bat
You have to get a patch, so that SH can use more RAM Space www.subsim.com/radioroom/downloads.php?do=file&id=2888 - solved the problem for me. Contact me, if you need further help with the installation
@@apel39 link dont work and i have this problem :/
@@ceskymic I'll send you the patch then. Just give me an adress, where i can send it to Friend. Don't worry, we get this working for you
@@apel39 I already have it :)
@@ceskymic Okay. Good to read. Good hunting then and beware of the crush depth!
i cant anything mod wise to work lol im copying the instructions and nothing, fkn stupid steam selling shit so out of date hahaha
*Gigantic nazi symbol on the top left*
Oh and there is also a mod that removes this little emblem down here, maybe I should do it to not piss off youtube, LOL