not realy if you want it done right this is the way to do it the problem is the scratch is in the middle of the door and if you only fill it and paint it in a small area where there are no hard lines to blend the clear coat with you always gonne see the over lapin clear coat there is no buffing that out you will always see it and on a car like that in the price range of 100k + you want it done right you dont want overlapping clear coat marks so thats why he sands the entire door for a repaint and new clear coat to fully mask it
I can’t believe I’m watching this just to comprehend the hard work that goes into this cause someone decided to key my car. A low life who is miserable and hates himself so he had to attack my wallet…
Hmmm could have saved a bundle of masking tape. with one strip of foam tape for door jamb. Just syaing works great for me fades the paint in jambs and no need to cover the inside jambs.
interesting points ,if anyone else needs to find out about car spray painting tips try Alkarno Spray Paint Alchemist (do a search on google ) ? Ive heard some amazing things about it and my colleague got excellent results with it.
There are 2 different cleaners we use,solvent and waterborne.Solvent cleaner removes grease ,wax,silicone,etc.Waterborne cleaner is alcohol based and removes things like bug splatter,basically any contaminate that is water based and we use it to clean off the bodywork before primer.And some waterborne cleaners have antistatic and we use it on raw bumpers as well
Si trabajas bien, pero pensando como empresa desperdicias muchisimo material y para un rayon como que no hay ganancia, se que no es el punto de tu video pero checa ese punto piensa como jefe si algún dia quieres un taller
Hi, what's your opinion about those electric orbital sanders? Do they work well even for sanding the whole car ? they're resistant and able to work hard ? If you'll buy only one for all kind of jobs will you choose 2.5 or 5mm orbit ? Do you prefer electric or pneumatic ? My compressor has only 200lt and empties very quickly so a long time i'm temped to change for electric sander, but afraid they won't last or could be a bad choice Hope you've a few minutes to reply me Best Regards
You could do that but some shops like to use as little body filler as possible or none at all so that the finished work is nearly just like the manufacturer process of painting the vehicle.
Question, I looked up this video because my stupid self scratched the back passenger door against a cement wall🤦🏻♀️ they seem pretty deep and there’s a dent too. It’s harder to tell right away because the car is white. Is this around 300 euro how much would my damage be around? Just an estimate. I wish I could put a picture :/
I'd like to hear it step by step, but I am hearing conflicting views. I have heard for deep scratches you need to do it like this but others are saying just fill it. I've seen other TH-camrs repair deep scratches by buffing and you can still see the scratch.
@@DutchCarPainter Thank you very much :D OF THE MANY PAINTING WORKS YOU DO ... IT DOES NOT SEE THERE IS A WAY TO PAINT CROME .. WHAT MAY I MISS THE VIDEO ..CAN YOU MAKE THE VIDEO I MAY BE THANKS ... THANK YOU
Some asshole hit the rear of my car, luckily the paint was only scratched and my the rear panel was slightly bent. Now I'm just watching this to see how they fix these cars.
So I'm guessing that first coat (21:00 minutes) was the Epoxy Primer right? And for how many minutes did you heat it up? ...also noticed using 2 types of cleaners (blue bottle in 32:26 and orange bottle on 33:50) can you please emphasize I'll appreciate it and Thanks boss you are the best✌
Yea he did take forever. To many fucking steps. Anyone that. Takes forever like him is just stupid Get shit done do it the right way have a window. Don’t be like the first guy that replied to you. An idiot
Hey master, how much time did you spend on this job? How much money does this job cost? I'm from Russia. I'm curious.I've been watching you for a long time. I like the way you work.
It would have been quicker to sand the door down and paint the whole thing. You also didn't finish it. Not sure how this is professional scratch repair, you left the car with a huge two tone matt grey door.
bunun bi boktan anladigi yok... oraya hafif siyah boya püskürtse halbuki yeticek (kutu boya 2 lira fln).. illaaa show yapacak.. amk sonuc nasil onuda göremedik.. kesin arabayi komple degistirdi gavat
Pour une rayure de cette taille. Est ce qu'il doit absolumment enlever tout ca? Cest plus comme repeindre tout la porte a mes yeux au lieu d'une retouche? A moins que cest ce que le demande le client.
Is butter and more economic to take the door off and work on it alone , this is not professionnel , for car like this you must be more careful and more secure 😎👍
Hey everyone, the greatest success that I have ever had was with the Magic Painter Method (i found it on google) definately the most helpful info that I've tried.
This is by far one of the most pretentious BS I have seen in a while... the door did not need that much work
not realy if you want it done right this is the way to do it the problem is the scratch is in the middle of the door and if you only fill it and paint it in a small area where there are no hard lines to blend the clear coat with you always gonne see the over lapin clear coat there is no buffing that out you will always see it and on a car like that in the price range of 100k + you want it done right you dont want overlapping clear coat marks so thats why he sands the entire door for a repaint and new clear coat to fully mask it
How to make the job 10 time bigger than it needed to be!! Should have filled scratch with fine filler, flatten and repaint!!
Manoo42 Agreed. 👍
The correct way to fix it would have been to fill in the deep scratch with touchup paint, sand off the excess touchup paint, then paint correct,
Sempre que posso eu acompanho seus vídeos. Muito bom. Aqui essa lixadeira roto orbital esta 2300 reais. Muito cara
Põe cara ,por isso eu uso uma da dewalt me serve muito bem
@@AndreSilva-wh4pj amigo a da dewalt no que toca a lixar polyester aprova?
The most destructive way of doing it. Well, that’s one way of doing it.
my teacher said you did a horrible job and u don’t know how to sand , hope this helps 🥰
cool, but where the video of the rest? result?
I can’t believe I’m watching this just to comprehend the hard work that goes into this cause someone decided to key my car. A low life who is miserable and hates himself so he had to attack my wallet…
Nice job my man
overkill to make the customer pay a sky high price!!!
Great video. You should make a video of the painting process of this job.
Mark Perez hao Vat tu quá
ESE AIRE ES FRIO O CALIENTE
Hola amigo mas corto el vídeo está muy bien el trabajo
Hmmm could have saved a bundle of masking tape. with one strip of foam tape for door jamb. Just syaing works great for me fades the paint in jambs and no need to cover the inside jambs.
Nice quick job.
Which cleaners do you use?
I see there are 2 different cleaners?
Greetings from German painter 👍
interesting points ,if anyone else needs to find out about car spray painting tips try Alkarno Spray Paint Alchemist (do a search on google ) ? Ive heard some amazing things about it and my colleague got excellent results with it.
There are 2 different cleaners we use,solvent and waterborne.Solvent cleaner removes grease ,wax,silicone,etc.Waterborne cleaner is alcohol based and removes things like bug splatter,basically any contaminate that is water based and we use it to clean off the bodywork before primer.And some waterborne cleaners have antistatic and we use it on raw bumpers as well
Man this guy needs to teach other people how to make how-to videos. He didn't talk about his damn dog or anything.
I hope that was sarcasm.
I guess it is quite off topic but do anyone know a good place to stream newly released series online?
@Jaiden Kalel I watch on FlixZone. Just search on google for it =)
@Bryson Corbin Yea, I've been watching on Flixzone for since april myself =)
@Bryson Corbin Thanks, I went there and it seems to work :D Appreciate it !
ESE LIQUIDO DEL TARRO BLANCO QUE ES , GRACIAS
félicitation ce mr et ho tope travail trés soigner et régulier la Classe
Lol genius to roll around with a chair. I have never had a rolling chair at work to move and sit yet
Looks like he did more damage before fixing the scratch
Si trabajas bien, pero pensando como empresa desperdicias muchisimo material y para un rayon como que no hay ganancia, se que no es el punto de tu video pero checa ese punto piensa como jefe si algún dia quieres un taller
Hi,
what's your opinion about those electric orbital sanders?
Do they work well even for sanding the whole car ?
they're resistant and able to work hard ?
If you'll buy only one for all kind of jobs will you choose 2.5 or 5mm orbit ?
Do you prefer electric or pneumatic ?
My compressor has only 200lt and empties very quickly so a long time i'm temped to change for electric sander, but afraid they won't last or could be a bad choice
Hope you've a few minutes to reply me
Best Regards
How much would something like this cost
Where’s the rest of the video? Or part 2 to finish it up?
I don't understand how he can use a 6" sanding disk, and only remove around 1.5" of paint.
What was the reason to remove so much paint all the way down to the metal? Why not fill the scratch then sand?
You could do that but some shops like to use as little body filler as possible or none at all so that the finished work is nearly just like the manufacturer process of painting the vehicle.
Para mi es mas fácil darle con un pinselazo y dejar secar de ahí lija con tarjeta y de ahí su praimer
Si más fácil aplicar putty filler y primer, al menos que el rasguño sea muy antiguo y tenga demasiado óxido
Question, I looked up this video because my stupid self scratched the back passenger door against a cement wall🤦🏻♀️ they seem pretty deep and there’s a dent too. It’s harder to tell right away because the car is white. Is this around 300 euro how much would my damage be around? Just an estimate. I wish I could put a picture :/
Look for a small Not very busy shop and stay away the crowded areas of the city..
Wondering why 607 people gave thumbs down with this process ?
how much does this cost?
Why use the silcon based solvent after the water based solvent, is it to prevent the initial stages of oxidation?
Water based won't remove every contaminant so the solvent based cleaner will get what the water based couldn't.
WHY DIDN'T YOU PRESENT THE FINAL PAINTING ?
I'd like to hear it step by step, but I am hearing conflicting views. I have heard for deep scratches you need to do it like this but others are saying just fill it. I've seen other TH-camrs repair deep scratches by buffing and you can still see the scratch.
Hi, bestfriend ..
I want to ask ..
what do you use after sanding 320+ minutes 4:13 ..
a kind of black foam ..
what is a shabat? :D
It is scotch brite from 3m
@@DutchCarPainter Thank you very much :D
OF THE MANY PAINTING WORKS YOU DO ... IT DOES NOT SEE THERE IS A WAY TO PAINT CROME ..
WHAT MAY I MISS THE VIDEO ..CAN YOU MAKE THE VIDEO I MAY BE THANKS ... THANK YOU
Thank you brother I love you🇲🇦🇩🇪👍👍👍👍👍👍👍👍👍👍👍
professional painter but where is the repainting process
Hahahahah le travail le plus sale et la civilisation du propriétaire de la voiture
Hallo,
das ist keine Kratzer--Entfernung. Hier wird mit viel Aufwand eine Tür neu lackiert.
Falsche Überschrift!!
Some asshole hit the rear of my car, luckily the paint was only scratched and my the rear panel was slightly bent. Now I'm just watching this to see how they fix these cars.
We love your great Lessons! Another perfect job!!
one of the best videos I have ever seen.!!
So I'm guessing that first coat (21:00 minutes) was the Epoxy Primer right? And for how many minutes did you heat it up?
...also noticed using 2 types of cleaners (blue bottle in 32:26 and orange bottle on 33:50) can you please emphasize I'll appreciate it and Thanks boss you are the best✌
First is a uv primer based on epoxy, fisrt bottle is water based degreaser second silicon based
@@DutchCarPainter
I really appreciate your replay sir thank you for your dedicated time in helping us do the job right👍
@@samsbogh9361 why use the silicon based solvent after the water based solvent, is it to prevent the initial stages of oxidation?
Out of curiosity, wouldnt it have been cheaper just to buy a new door?
Thats about 400€
So no
And you have to paint the door
Takes you forever.to get things done. The time it took you to prime it I would of painted it already 🤭
@Iee Howarth May you post a video showing you process? would much appreciate
Yea he did take forever. To many fucking steps. Anyone that. Takes forever like him is just stupid Get shit done do it the right way have a window. Don’t be like the first guy that replied to you. An idiot
Awesome professional level work!!!!!
What liquid did u spray on to check repair at 32:40 please?
Normal silicon degreaser
what ur location ?
This is supreme work.
Thanks for the channel will visit this country
th-cam.com/video/b7-pUbjcLoA/w-d-xo.html
Darf ich fragen welchen Exzenterschleifer sie benutzen?
Das sollte ein Mirka Deros sein, in jedem Fall ein Mirka!!!
Nice job
Hey master, how much time did you spend on this job? How much money does this job cost? I'm from Russia. I'm curious.I've been watching you for a long time. I like the way you work.
In Russia it's coast around 100€. This works
@@ИонИон-ы2у Many thanks. Ты где работаешь?
@@ЛЕвША62 заборы красит
Sir how much is your salary?
А че до конца не снял видео? Наверное лак потекла
Он почти нигде да конца не показывает, думаю просто кайфует по подготовке детали перед покраской
Sir I'm a painter too in India!
You paint in the street
and you are my assistant 😂
You paint with fingers
Good job ✌
th-cam.com/video/b7-pUbjcLoA/w-d-xo.html
Show us some shrinking methods.
BUEN VIDEO, PERO DEBERIA HABLAR Y EXPLICAR CADA PAS
how much does this repair cost?
300 euro
Dutch Car Painter for the same work I take 60 70 euros🙁
@@adigalben8383 yeah but you dont pay taxes like in europe
I love like a video🇲🇦🇩🇪👍👍👍👍👍👍
Egyszerübb lett volna a falcba egy kukac,, mint kiragasztani az egészet. 😃😃
Teil1! teile2?????? Lack?Politour???Video???
Нипонял ,зачем он с грунтом заморочился ,покрасилбы на мокрый грунт и все🤗
Что б время по тянуть, им же за бугром по часово платят
Из за такой царапины всю дверь? Да ну насмерть. Дверь, как заводской никогда не будет. Лучше отдал бы полировщику.
Zaglubokaja carapina
If he was really professional, he wouldn't have painted the door to close the scratch
Standox 1Q2 photo spectro meter👍🏻
He could went air borne and the bridge side walking pebble
1st step. Clean it with wax and grease remover BEFORE you sand. If I was you -- I'd stick to sweeping the floors lol.
I really like this video🙂🙂
I haven't come to see you for a long time.h😁
Body repair ca r
👍👍👍👍👍👍
It would have been quicker to sand the door down and paint the whole thing. You also didn't finish it. Not sure how this is professional scratch repair, you left the car with a huge two tone matt grey door.
Same for me ,good job bro
trop de temps pour ça
No wonder that probably cost £500
Bizim burda olsa araba boyalı diye almazlar amk
انا طولي من لجزائر سمحلي نحتارمك بصح معجبتنيش طريقتك فلعمل
Salut mon frérot je suis en travail professionnel
ياو كلاها الي مخرجتش بل ابات. .. يدرلها ستيلو بانتورة دوريجين حبيبنا بدا يبونصي طول ههههه هههه😁😁😁😁😁😁😁😁
Utanmasalar kapıyı değiştirecekler😂
ufacik cizik icin arabanin anasini sikti
bunun bi boktan anladigi yok... oraya hafif siyah boya püskürtse halbuki yeticek (kutu boya 2 lira fln).. illaaa show yapacak.. amk sonuc nasil onuda göremedik.. kesin arabayi komple degistirdi gavat
What a tiring job to remove a scratch
good
Damm all that for one scratch?
Please and thank you👍👍👍👍👍👍
Gostei
Ich weiss alles 3m..
hokran lik
Koya
لباب كانت لباس عليها مفهمتش علاش بونساها
En 15 minutes je fais le même résultat ! Et la peinture et prête :) trop de chichis lol
En 15 min.... j'aimerai bien voir sa 🤔
@@klut9818 il avance a rien et passe beaucoup temps a faire des choses inutiles
@@nirvanafr4470 oui sa on est d'accord... sans doute pour facturer de la MO 🙈
@@klut9818 la facture doit être salé
Pour une rayure de cette taille. Est ce qu'il doit absolumment enlever tout ca? Cest plus comme repeindre tout la porte a mes yeux au lieu d'une retouche? A moins que cest ce que le demande le client.
What a boss
Excellent job but terrible blade 👍😂
Is butter and more economic to take the door off and work on it alone , this is not professionnel , for car like this you must be more careful and more secure 😎👍
And that scratch probably cost them $2000
Nah probably $500 ish
Aredo learn MASKING🇲🇦🇩🇪👍👍👍👍👍👍👍👍
thank you
th-cam.com/video/b7-pUbjcLoA/w-d-xo.html
From looking at this, I think you hate the painters , the car and your job .
I find it interesting, the guy doesn't say anything yet you understand
I like the way he uses the filler, he use the lees posible
Ohhhh🥰😍😍😍😍😍😍
Hlw
Spr spr spr😘👌👌👌👌👌👌👌✌
my teacher said this hurt to watch
It is 20years experience,maybe you teacher don't have that 🤗
@@DutchCarPainter hes 30 years into this sir he said it look like u sand with your feet😂
@@DutchCarPainter our teacher got 30 years of experience , and he told all of us that u dont sand right and you arent suppose to be sitting bum
Wtf???
De professional nao tem nada.....
Hey everyone, the greatest success that I have ever had was with the Magic Painter Method (i found it on google) definately the most helpful info that I've tried.
e como seria o processo profissional? tem um video explicando? grato