You guys need to do more of these type of vids. I'm a trucker,and It is a professional looking one at best.Like all the close and wide angle shots you've done. But the only thing wrong,..is that it wasn't long enough for me. And it's your fault. I want to see more...Keep Em coming guys.Cool video.
Those guard rails on the blade arms seem like a giant waist of time. If someone hits the blade, a little bit more metal attached to the metal isn't going to soften up the impact.
With some our highways/roads such deplorable shape do you not at times drag the front of that trailer seeing how it rides so low to the ground? I've seen this with car haulers a lot. I did a stint at one of GM's auto plants. The haulers complained about it all the time.
Depends on the height setting. The trailer I use has 4 settings. I almost always use the highest setting. It gives me about 8inches of ground clearance depending on the weight of the machine.
A very nice video but, they could have clean up the tires on the trailer for a better showing of their equipment. It took away from the total package of the clean truck and trailer image.
WTF heavy haul? My gramps used to haul around his old D8 around on nothing but a 290 powered White road boss and a two axled non detachable goose neck. smh this is overkill. Also here's a guy who regularly hauls around his D9H: th-cam.com/channels/Vr-uUnTEFPhMMxmknr5LMw.html
First off it's not 1960 anymore , second that other guy is hauling an ancient d9 which is roughly the same thing and last but most important. It's two different states. So basically it doesnt matter what you think , it matters what that permit says to do
@@adamsimonsen150 I hauled a 2 man cab Firecat for the LACO Fire department and our D8Rs Weights were at 90,000 with mounted winches on the rear... BIG RED. Their the only Dozers from Cat painted Red... Goggle Fire Dozers and you'll see them
Gotta start small and work your way into it. I started with a construction company and we had several smaller pieces of equipment, but I slowly progressed into out bigger equipment like komatsu 200 excavator, Cat D6 hi-track dozer, etc. Now I'm with a different company doing asphalt work. We have a big Cat loader (integrated tool carrier model), big Cedar Rapids paver, Etnyre chip spreader, old John Deere 690-D excavator, and various smaller pieces. Heaviest I've ever ran was a little over 90k. Widest is around 12ft with our chip spreader. Tallest is just a little over 14ft with the Cat loader.
![[TH] VCT Pacific Stage 2 - Week 4 Day 3 // GEN vs TS | PRX vs ZETA](http://i.ytimg.com/vi/nspkjQuZve0/mqdefault.jpg)
I'd rather hear the music from those twin pipes of that working semi than the screaming guitars.
Boy does that bring back many memories, hauled a lot of those dozers and excavators. Thanks I needed that.
Lol, watching Men and Trucks work is my hobby!!!
Great video styling. Enjoy the different angles. 😊👍
Am heavy duty Truck 🚚 Driver from Pakistan 🇵🇰
Beautiful rig. Congrats
KENWORTHS are always impressive
The Musicmeister deserves a shout-out for the GREAT audio background.
preciosidad de maquinaria no hay más palabras felicidades por ese video
thats what i want to upgrade to from dry van
looks awesome and good money
Awesome video, nice job
Elegantes los dos D8T & W900
great video!!!
Why are the guard rails on side of dozer. Is this some state requirement.
Now that's what you call a big toy!
You guys need to do more of these type of vids. I'm a trucker,and It is a professional looking one at best.Like all the close and wide angle shots you've done. But the only thing wrong,..is that it wasn't long enough for me.
And it's your fault. I want to see more...Keep Em coming guys.Cool video.
1:48 1:48
Cool video, more of those please :)
Thanks
Good video.
Pretty slick ..
Nice truck
What are the things on the draft arms?
A big thanks to Theron and our team for planning and making this amazing video. Love it! Barry & Deb
I would have covered the exhaust on the dozer.......
WHAT IS WITH THE ARMCO RAIL ON THE PUSH ARMS ?
I'm subscribing lets see you do more
awesome, I love the d 8 dozer and the red kenworth transporter, and the international truck. one great video.
Ok. I'm your #2 subscriber!!!! Good luck!
Thanks Mike, looks like the video is starting to get some traction. Thanks for your support.
What would you say is a fair hourly wage for a float driver?
more videos your channel will go far!
Thanks Fearless
Permits and fees must have cost about $1200. bad boys.
KW enough said.
nice
Great idea using the guard Rails on the blade.
No it's a complete waste of time and money. It doesn't protect the public at all. Any heavy hauler in pa will tell you the same
pa heavyhauler just more crap to haul around. Does nothing..... Cute gimmic for customers that know nothing
I’ve pulled heavy haul and these dozers for 12 years and never seen or heard of a guardrail on them...
Pa won't issue a permit unless you have the serial numbers for them
"Guide" rail...same as on the side of highway...purpose is deflection. Have them on load or remove blade.
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Me gustaría manejar algo así
can one of you guys answer this. can a trucker in the states decide his own route or is he told what route he must take
Any Oversize load the state directs your route
@@TheBadchita you can pick your routes but the state will say yes or no or give a few alt routes
Thats some heavy metal right there😂😂😂
Nice rig
Thanks Charlie
Theron Leighton Crude Oil hauling isn't paying as much as it used to. Seems like the Heavy Haul is where the action is....
Those guard rails on the blade arms seem like a giant waist of time. If someone hits the blade, a little bit more metal attached to the metal isn't going to soften up the impact.
Its about deflection....same as guide rail along a highway.
Such a cool video out of Whitehall i haul for these guys all the time and it is a absolute bitch getting in and out of there
With some our highways/roads such deplorable shape do you not at times drag the front of that trailer seeing how it rides so low to the ground? I've seen this with car haulers a lot. I did a stint at one of GM's auto plants. The haulers complained about it all the time.
Depends on the height setting. The trailer I use has 4 settings. I almost always use the highest setting. It gives me about 8inches of ground clearance depending on the weight of the machine.
A very nice video but, they could have clean up the tires on the trailer for a better showing of their equipment. It took away from the total package of the clean truck and trailer image.
WTF heavy haul? My gramps used to haul around his old D8 around on nothing but a 290 powered White road boss and a two axled non detachable goose neck. smh this is overkill.
Also here's a guy who regularly hauls around his D9H: th-cam.com/channels/Vr-uUnTEFPhMMxmknr5LMw.html
First off it's not 1960 anymore , second that other guy is hauling an ancient d9 which is roughly the same thing and last but most important. It's two different states. So basically it doesnt matter what you think , it matters what that permit says to do
How much does that Cat weigh?
steve holton a Cat D8T dozer weighs around 88,000 lbs fully dressed.
@@adamsimonsen150 I hauled a 2 man cab Firecat for the LACO Fire department and our D8Rs
Weights were at 90,000 with mounted winches on the rear... BIG RED. Their the only Dozers from Cat painted Red... Goggle
Fire Dozers and you'll see them
Anyone else see the snap-on truck?
I guess you're pulling a 475 to 550 CAT or Cummins,huh? Beautiful Tractor. And it's a Kenworth,even better...
Thanks Rico, the T800 has a 550 Cummings in it. Stay tuned, the next video will be incredible.
Theron Leighton
it is a Great powerful truck ! and nice music !
Nice video, plenty of angles and such, obviously spent some time on it.
We're You From Dear friend
any tips on how to get into heavy haul.
Ramiro Gutierrez no one ever tell you if they have a magic ticket.
But it pays a hell of a lot I get
Gotta start small and work your way into it. I started with a construction company and we had several smaller pieces of equipment, but I slowly progressed into out bigger equipment like komatsu 200 excavator, Cat D6 hi-track dozer, etc. Now I'm with a different company doing asphalt work. We have a big Cat loader (integrated tool carrier model), big Cedar Rapids paver, Etnyre chip spreader, old John Deere 690-D excavator, and various smaller pieces. Heaviest I've ever ran was a little over 90k. Widest is around 12ft with our chip spreader. Tallest is just a little over 14ft with the Cat loader.
Whats the name of this song
song name?
You guys are so cute calling that heavy haul LMAO
Music is annoying, turned it after 30 second's
Horrendous music completely spoils the video, explains only 313 subscribers
Cut the music out and let us listen to engine roar....
Really the whole video screaming guitars come on man
Music ruined the whole video....
The music unnecessary
Music nasty.