Memphis Shades Turn Signal Relocation with J&P Cycles.

Shop Now
www.jpcycles.com?Memphis_Shades_Turn_Signal_Relocation_with_JandP_Cycles.&JoUquPSbI
Johnny Murphree of Memphis Shades motorcycle windshields gives a complete How-To instruction on relocating your motorcycle turn signals if you are going to mount the Memphis Shades Batwing or other products available from J&P Cycles.
Easy to follow instructions make this a very simple job that you can do yourself.

[@jpcycles]

See more at Countersteer
www.jpcycles.com/countersteer?Memphis_Shades_Turn_Signal_Relocation_with_JandP_Cycles.&JoUquPSbI

[@karaokekid7189]

Nice video... I just purchased a Softail and the front turn signals had been removed. Do you know where I may find the wiring, so I can reinstall a set of front turn signals? It's a 2002 Deuce, but I don't have an owner's manual.

[@ogallerieportland3194]

I purchased MEM8984 from J&P cycles it only contains 2 bolts. Is there a kit that has the bolts which I assume would be for the turn signals to mount to the brackets?

[@RalphARoo]

Wow. If you check Memphis Shades mounting instructions, it shows the turn signal mounted on top of the L-bracket, not below, as you have shown here.

[@hammered0184]

Can I retain my Harley-Davidson quick release windshield hardware on '05 FatBoy?

[@MrAhhsum]

Crickets. Shame they never answered.

[@Mr55Colorado]

The wiring on my 2014 is about an inch and half long and is part of the wiring harness in the switch cluster. I can't move the front turn signal more than an inch from where it is installed. Is there a wiring extension kit available?

[@jaykay9493]

J same on my 2015 fat boy Lo. You find a solution?

[@madmaxx1971]

@@jaykay9493 Anyone figure this problem out yet, I have same problem with my 2014 Fat Boy lo

[@jaykay9493]

@@madmaxx1971 i never did. the only solution I see is sodering to make it longer maybe. i gave up on the turn signal n adding a fairing

[@diannpavelka4505]

With a 2009 fat boy I had to move the gas tank back to access the wiring, I had to cut and solder, couldn't find a harness.

[@brgehrm1]

I simply cut the wires and ran new longer ones through the handle bars soldered/shrinkwrapped the cables together@@madmaxx1971

[@mattortiz2117]

Where can I find this kit. TIA

[@bstrong5008]

Amazon

[@AbelBaez]

I can't find that part on the JP website can you help please?

[@jpcycles]

+Abel Baez www.jpcycles.com/motorcycle-lights?Ntt=memphis%20shades&Ntk=All

[@Hathorr1067]

No offense, but those look like something from JC Whitney.

[@bendaves77]

If you are going to spend the money in coming up with a kit for this why didn't you atleast spend a little more time on it and make it a nice looking bracket instead of something that you made in your garage