How to Replace Alternator 2005-2010 Chrysler 300
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- Buy Now!
New Alternator from 1AAuto.com 1aau.to/ib/1AEA...
This video shows you how to install an alternator on your 2005-2010 Chrysler 300. The alternator in your vehicle powers the battery and electrical system while the engine is running. If your alternator is failing, you may wind up with a constantly draining battery.
This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa7U/1A...
• Pry Bar 1aau.to/oK6/1AX...
• 10mm Wrench 1aau.to/oNU/1AX...
• 10mm Socket 1aau.to/oaSp/1A...
• 13mm Socket 1aau.to/obat/1A...
• 15mm Socket 1aau.to/obat/1A...
• 17mm Socket 1aau.to/obat/1A...
• 7mm Socket 1aau.to/oaSp/1A...
• Trim Tool Set 1aau.to/oYQ/1AX...
• Pliers
• 1/2 Inch Ratchet 1aau.to/o6y/1AX...
• 1/4 Inch Ratchet 1aau.to/oaSp/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obat/1A...
• Torque Wrench 1aau.to/oaq3/1A...
• Gloves 1aau.to/oFY/1AX...
• Safety Glasses 1aau.to/ozE/1AX...
• Drain Pan 1aau.to/ouC/1AX...
• Funnel 1aau.to/of8/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I just replaced my alternator on my 2005 Chrysler 300, 6 cyl, 3.5 L 2.15 CID today. You sir must work at an auto body shop and not a mechanic shop. You are removing unnecessary car body parts to get to the alternator. Your bill for this type of work at your shop must be excessive. I spent a total of $145 and 58 minutes of labor time. You've totally exaggerated the amount of work required to replace the Chrysler 300 alternator. The only part I agree with is removing of the positive and negative battery wires.
Is this the right video? I thought we were replacing an alternator and this guy is draining a radiator?
How long did it really take to break the bolts loose? 😅
Great Video and Info !!
Why are you removing the cap from expansion tank and draining water just to change an alternator?
Did he have to drain the radiator in this model because of the size of the hemi? Seems like it would be easier in my 3.5l V6
Do u HAVE to remove radiator hose to get the alternator out?
seriously all that work just to get the alternator out??
I'm confused why the driver side wheel well the alternator is on the passenger side.of the wehicle.
I replaced mine in an hour without removing anything but air intake system and one jack stack stand next to the front right tire😂 This guy is a terrible mechanic not even the radiator hose was taken out the alternator wiggles out from the top but takes two to finish.😁 2010 Chrysler 300c 5.7 L
my Chrysler is having some bad issues malfunctioning mds cylinder deactivation, ecm/pcm will lose communication randomly and my lights on my dash will dim in and out especially when the radios on, I go to the hidden menu and the voltage is very inconsistent it will bounce from 12.9 volts to 14.2 and it will go up and down constantly, I’ve noticed when I press my brakes or shift gears the voltage will dip from 14.2 to 12.9 and go back up I can also disconnect the thermals on the battery and the car will instantlly die, is this a sign of a failing alternator or am I screwed/ bad pcm ecm because I read that the ecm pcm control’s alternator voltage
Jesus Christ