Love this book! th-cam.com/users/postUgkxpCNxqmAkyjN6NPx1fyB7QiEFWyO5mUWL it is simply one-of-a-kind! I really love it, because karah explained all tools required to have the job done, not mentioning the fabulous diy pallets ideas. I'm pretty sure this will be a fresh start in my new endeavour. Amazon was great, they delivered on time. Thank you!
Very nice. I love it. Ok, I have all the tools. Now I need to find some barky hard wood! The only thing I will probably do it cut the handle down in thickness, such as on an iron skillet so you can get fingers under it and give it dimension. Saw mills are few and far between were I live. It will take some searching to find a private individual such as yourself. But Im sure I can. I thin I'll get 2 slabs. One like yours and the other with bark on both sides.
Boa noite amigo que ferramenta e essa que você raspa essa madeira a proposito ficou linda e tabua de corta carne obrigado por mostrar esse trabalho maravilhoso
Not sure the type of wood I have but I want to stain the wood, then apply Howard - Butcher Block Conditioner (Food grade mineral oil and natual waxes)...will that be safe for use? I am worried I will cut through the wax, into the stain. Or should I leave the stain out? Also want to engrave a design. Do you think I should engrave, then wax? If I stain, I assume the stain will be applied after the engraving and before the wax.
Great work, I'm doing the same with some old oak on my property, just I lack alot of those useful tools. Did you sell this piece, and if so about how much, may I ask.
I'm binge watching woodwork videos as I'm interested in getting into carpentry at home. This was entertaining and what a beautiful board! Just 1 question, I notice you didn't spray water on the board to get the fibres to rise before the final sanding down, does it really make a difference if you do it as I've noticed many people do it and many people don't do it either.
Awesome work! what is the name of the that tool you used towards the end to bevel/round off all the edges? also how high of a grit do you sand the cutting surface to? when I make cutting boards I go up to 3000 grit but here from other that its unneccesary
Mineral oil? *REALLY??* You should have used extra virgin olive oil. The fragrance it emanates and the gorgeous look of olive wood makes me want to take a bite of my cutting board every time I take it out of the cupboard.
dan barrow the router is from Amazon, it was a very good deal! Possibly some Chinese make, but very well built! Looks like a copy of Makita! I don’t have the link anymore.
Love oak but oak has very open fibers as I’ve been told so food particles will get stuck in them. Does the beeswax stop that from happening? And do you have to constantly reapply?
Considering there is no speaking it’s quite an informative video. Well done 👍🏻
Absolutely beautiful. You are truly gifted.
I love it.... And i am planning to do this with Termarin wood... I am from sri Lanka.
Love this book! th-cam.com/users/postUgkxpCNxqmAkyjN6NPx1fyB7QiEFWyO5mUWL it is simply one-of-a-kind! I really love it, because karah explained all tools required to have the job done, not mentioning the fabulous diy pallets ideas. I'm pretty sure this will be a fresh start in my new endeavour. Amazon was great, they delivered on time. Thank you!
Amazing attention to detail!
Beautifully done! You gave me an idea for my scraps.
Super cool. I love that design.
Great, easy project. I have a ton of wood at my farm in Costa Rica. Just need the tools...maybe some day.
Love it! Very nice, thanks for demonstration
I gotta say. That is beautiful man.
Beautiful piece wood put to good use. Nice one thanks.
That turned out really beautiful.
Sam K thank you!
Good Shape beautifull proportions, very Nice Work I love it !
Not sure how I haven’t seen you before but am subscribed now. Love the project and will be making a few I’m sure. Thank you for a fun idea.
A quality product and a great video...
It's beautiful. I wouldn't want to cut anything on it I'll be worried it will damage it.
Hello, what kind of wood is this? It's beautiful, and your craft is excellent.☺
Thank you! Oak 👍
Zajebista deska....
Chciałabym takie maszyny....
Congratulation!!! beautiful work.
Very nice. I love it. Ok, I have all the tools. Now I need to find some barky hard wood! The only thing I will probably do it cut the handle down in thickness, such as on an iron skillet so you can get fingers under it and give it dimension. Saw mills are few and far between were I live. It will take some searching to find a private individual such as yourself. But Im sure I can. I thin I'll get 2 slabs. One like yours and the other with bark on both sides.
I see you use both hands when you work. That's good so do I.
Man watching you was very therapeutic ! Thanks for the share! What was the wood you use!
Boa noite amigo que ferramenta e essa que você raspa essa madeira a proposito ficou linda e tabua de corta carne obrigado por mostrar esse trabalho maravilhoso
I like the organic look, nice work!
Scott Belleri thank you!
Beautiful, I like it😊
Great job Szilard
Not sure the type of wood I have but I want to stain the wood, then apply Howard - Butcher Block Conditioner (Food grade mineral oil and natual waxes)...will that be safe for use? I am worried I will cut through the wax, into the stain. Or should I leave the stain out? Also want to engrave a design. Do you think I should engrave, then wax? If I stain, I assume the stain will be applied after the engraving and before the wax.
Great video
Hell yeah. nice. I want to do this.
what type of disc do you use on the grinder?
Nice Board, great design, I just finished some last week from Camphor Laurel it has such a beautiful grain.
well done, very nice, thanks
Hi mate love ur stuff , what kind of band saw is yours and how much was it thanks
Gorgeous mate!
Great work, I'm doing the same with some old oak on my property, just I lack alot of those useful tools. Did you sell this piece, and if so about how much, may I ask.
That is beautiful! Can you please tell me which Roundover Bit you used in your router? Thanks!
Stunning !!
Looks great!
Great job!
What kind of wood do you use?
Construction Technology that was English oak!
Instablaster
I noticed that you are left-handed which is good because so am I . And so are a lot of woodworkers on you tube
Bardzo ładnie.Pozdro z Polski
That thing is very cool love it a lot but didnt think you where to use Oak for cutting boards because of the open grain of the oak ?
I like it, nice!
I'm binge watching woodwork videos as I'm interested in getting into carpentry at home. This was entertaining and what a beautiful board! Just 1 question, I notice you didn't spray water on the board to get the fibres to rise before the final sanding down, does it really make a difference if you do it as I've noticed many people do it and many people don't do it either.
It does make a difference and it doesn't take enough time to not do it.
You sell them Sir? Would love one for my kitchen. Heck anyone can by a cutting board from Walmart! I want something unique
Have you ever had any issue with the oak? I know it’s not the best for cutting boards because it’s so porous.
nice work :D great video
MrBusbahnhof thank you!
Szilard Pinter tv
complimenti ... proprio bello
Love this.
Love this. Very nice job.
What kind of Wood was that you used ? And what are the uses for this type of cutting board ?
stufoo1 thank! That is English Oak!
This will be display only, but otherwise food prep in general I would say!
Great work .looks stunning
What router bit did you use ?
Nice job matey...👍👍
Durham Drona thanks Mate! 🙂👍
Good morning, friend, you finished with epoxy resin ??
Awesome work! what is the name of the that tool you used towards the end to bevel/round off all the edges? also how high of a grit do you sand the cutting surface to? when I make cutting boards I go up to 3000 grit but here from other that its unneccesary
That is a small router. Called a trim router. 3000 grit on wood is useless.
Was that a little spolted
Beautiful. What species of wood?
G Mitchell English Oak
Thank you
Очень красивый рисунок у дерева
Mineral oil? *REALLY??*
You should have used extra virgin olive oil. The fragrance it emanates and the gorgeous look of olive wood makes me want to take a bite of my cutting board every time I take it out of the cupboard.
Olive oil and other vegetable oils WILL go rancid with time. Mineral oil is completely stable (won't go rancid) and is food safe.
Что за дерево и чем покрывал в конце?
Hay mate quick question plz where u get ur disc n belt sanders for ur 6” n 4” Clarke sanders plz mate
Also what palm router is it ur using please n that turned out real nice the oak board mate nice
Hi! I’ve got them from eBay!
dan barrow the router is from Amazon, it was a very good deal! Possibly some Chinese make, but very well built! Looks like a copy of Makita!
I don’t have the link anymore.
I think I have seen it on eBay in between £30 and £40?, what bout your belt n disc sanders mate what was price on that mate
dan barrow well that was quite a while ago, I can't remember unfortunately!
What is a waney edge?
Nice !
This may be a stupid question, but why the 45 deg bevel on the end? What am I missing?
Ross Hollinger just give a more finished look to it, that's all. 🙂👍
Would make it easier to pick up?
Amazing!!!
That's so nice
My husband used mineral oil on one he made and it looks red 😕, he used oak from a big box store
Was it Red Oak?
Szép lett!
Gábor Szilágyi Köszönöm!
did I hear jim acosta name on the radio? Little jimmey is so fake news. Like the cutting board by the way
Super !!!
If only I had so many tools ......
Mineral Oil?
Bastelfreddy yep! Indeed
Finish it off with some beeswax?
Vikingblooded Kraftwerks I actually did that later at home! Just the camera wasn’t running! 🙂👍
Love oak but oak has very open fibers as I’ve been told so food particles will get stuck in them. Does the beeswax stop that from happening? And do you have to constantly reapply?
Looks like a dustpan
Nagyon ötletes, de azok a szikrák amik a fűrész szalagvezetőiből jönnek nem túl egészségesek szerintem...nézz utána. :D
József Papp az csak a szar vezetok miatt can! Olcso szar tervezes! Ma banom hogy megvettem ezt a gepet!
Una paleta de ping pong?
super !!
👌
Nagyon jó
Lou Moritz Köszönöm!
Клас
Hi in russia
The sound in the video is so annoying!!
عبدالله الشمري as well as your shity comment!🖕🤫
Охуенно, бро! Like