My Amazon page! The gear I use here on the channel! - www.amazon.com/shop/metalcomplex Thanks so much for watching! You can support my channel on Patreon here - www.patreon.com/metalcomplex MC stickers! - www.redbubble.com/people/metal-complex/shop?asc=u
Do your brother maybe carry his phone in his right-side pocket? Maybe he doesnt want to scratch it up? Not that I can relate to your brother or anything..... :P I love, love, love that blade! One of the nicest looking blades Ive seen.
I ended up getting the polymer handle variant, it took a bit of time to find availability. I will say of everything great about this knife, it was actually the polymer handle. This is by far the most incredible execution of polymer I’ve ever experienced. It’s contoured and textured, warm to the touch almost like micarta, but most impressively THERE IS NO FLEX! Absolutely shocked me and now I’m holding all other USA knives using polymer to a much higher standard.
I think that the pricing here is obviously strategic. The $250 price point is where people who are generally not fans of something, and is the top end of "I should try this maybe" " it's a great deal, everyone says so I think I'll miss out if I don't buy this". And I do 1000% think that the price tag is going up or the other option is that they will have much , much cooler variations for a lot more money.
I think it’s priced that way to compete with the protech Malibu. It’s literally an almost direct competitor from two typically auto companies. Just with two different, equally fidgety locking mechanisms.
I think more expensive variants is probably the most likely scenario. Being Microtech, I’d expect to see some 4-500 dollar knives with some signature elements and special finishes around this time next year. Probably a handful of mirror polished 2,000 dollar Marfione “custom” variants as well.
I was lucky enough to pick one up. The action was horrible when I first got it. I ended up taking it apart to figure out why. Turns out the coating they apply to the blade was also coating the blade where the lock interfaces. I hand polished the blade along the lock interface with a diamond stone, added some KPL in the pivot bearings and it runs smooth as glass. I don't know if I would call the "lock stick" real stick. The disengagment does require the slightest of force, but it's been extremely consistent and is much improved with the polishing. The blade swings freely with the lock disengaged. Skiff does not make a caged bearing that will fit this massive pivot, but the shipped bearings do a great job and you can literally hear the bearings rolling as the blade is actuated. The blade material does seem to be better than the standard M390..still super sharp as the day I got it and I've been using the heck out of it..tactical cardboard cutting! I also got an EXO-M and as much as I want to carry it, the MSI has been my goto ever since I got it. EXO-M is my desk fidget tool.😅
Yea mine had kind of crappy action from factory, so as all us knife nuts do, I tore it apart and cleaned it and re lubed it with nano and now it's amazing! I think the lube they use is garbage, so a little nano fixes all! :)
I picked my copy up recently and it is the "new and improved" version with the frag milled texturing on the handle, and reviewed it. Pursuant to the clip, I have read somewhere in the past, before this knife came out, that Microtech uses that clip as a two-stage where it can go partially into the pocket, or all the way into the pocket. This gives the user the option of having more to grab to "tactically" remove the knife or choose a deep carry option. Snarky, nice review! 😅🗡️👍
I have a Stitch with the ram-lok best knife never I've ever held and last night I found the exact MSI I wanted. Frag G10 with an apocalyptic plain edge. Very excited for that to come in
I would never have looked at this knife except a vendor had one at a recent gun show in my town. I didn't know Microtech made a manual. It's the polymer with the black coating on the blade. I kept going back by the booth to handle it and finally picked it up at a good price. I love it! Great quality and steel, made in the USA. It is a beast! Keep going back to it to carry just because it works! Carries smaller than it is.
I think this is a really solid starting point for Microtech to build on their crossbar-style platform. It definitely has some kinks that need to be worked out, but luckily none of them are deal breakers, at least for me.
Just a guess but $250 must be for the G-10 handle version because I just purchased one with the polymer handle for $175. And honestly, I'm glad I went with the polymer. Which at first was due to its availability and the lowest price point I could find, but now its because the handle is just so impressive. I'm a lefty so I appreciate when a company does a fully ambidextrous model knife which with the MSI has been done exceptionally well. The contours are nice and even with great texturing. Lock up is solid, giving it a strong and robust feeling in hand. I mean, this thing is legit. Overall, I'm just stoked I found one, but now knowing it was worth every penny, well that's pretty cool, too.
I just got my first MSI and this is the only knife I have a problem Spidey flicking. Came here to see if that was an issue. So glad it’s not just me. Overall seems like a great knife for the price.
I have the FRN version. Basic black. First of all, I jumped at the first picture and told my seller I wanted one. I didn't bother checking the rest of the page. Secondly, even if I had checked the entire page and had seen the other versions, I think I still would have settled for the version I got. The reason? Price. PM2 price. Mine developed a lot of lock stick initially. Now it's stick free. I love it.
I’ve been seeing everyone’s videos on theirs and they look a tad different than mine. Mines has 2 extra screws by the stop pin. Was that part of the changes they made along with the clip?
Little tip if your finger is just barely resting on the lock button when you deploy the blade it neutralizes the lock stick. Also as long as you don’t deploy the blade like you’re cracking a whip, it will not stick.
I just picked up the polymer version on a trip up to Vermont this last weekend. It was 160 after taxes... Im very impressed with it. Absolutely worth the money.
I guess I am one of those rare weirdo’s that uses a folder in a tactical environment. Having ambi clip and lock mechanism is a must for me. My holster sits directly over the pocket that I would normally carry a knife so I either carry it in my opposite side or below the holster in a cargo pocket. The blade shape also makes alot of sense to be able to cut folks out of webbing/seatbelts with little risk of cutting them. Great review, this one is definitely on my “get” list.
Got mine through the service personnel program. 190 delivered. Mine has an aggressive texture in the scales and I do not detect any lock stick. Way bigger than I thought it would be. Home run for me.
definitely gonna be picking one of these up, but I think I'm gonna wait until they come out with a CF variant, maybe they'll increase the "detent" a little by then.
I don't know where to post the question.... I have watched A LOT of your content and there is never anything Gerber on your talks. I'm just curious. I don't feel a particular way about it, I only have two of their knives I believe. One is an auto that I beat the brakes off of. Are the knives really that substandard??
I am surprised and pleased the Microtech got this knife under $200!!! Sure, they’re injection molded polymer scales. However, as soon as aftermarket scales are available I’m getting some, and at about $180 it’s easier on the pocket!
Super easy to take apart and put back together. My MSI puts the blade back into perfect centering every time. My favorite knife. Almost nothing he says here is accurate.
So, I actually do need washers because I work with corrosive chemicals, gritty junk, occasional sandbags…basically the whole spectrum of knife-ruining goodness. How the hell do I shop specifically for washer knives? No website will let me sort/filter by washer vs bearings.
Check for a disassembly video for the knives you really want. Also, most $50 minimum knives have at least Teflon washers. There’s also a secondary market for bearings and washers that may have solutions for your problems. Good luck!!
I work in the same environment and this works well for me. The bearings are ceramic so chemicals don't have much effect. Just a can of air or dawn dish soap if it's real bad and your good.
just picked one up from local AD and over paid but I dont mind, this will be my main EDC for a while the action reminds me of the Benchmade Anthem but without the Ti acoustics. CF scales OTW.. pretty excited for that. You are the OG of knife reviews ! thanks for the video.
This is a an awesome knife! It became my new EDC, replacing a ZT 562CF. It comes incredibly sharp out of the box and the fit and finish are perfect. I love that style of blade as it has a very usable edge and a very strong tip. It opens smoothly and easily with just a flick of the wrist. I added a little bit of lube to the lock and the rounded part of the blade to make opening even smoother. M390 is an awesome steel and M390MK is very similar. The best part is the incredible value of this knife (polymer version) at only $177. This knife is way better than Benchmade’s Axis lock which i carried for a while (710) McHenry and Williams.
The 0562 is a phenomenal knife. Idk why i gave mine up. But also have one og these here just cant have it untill christmas. Just recently got a special efition factor b2 with a timascus clip so itl have to hold me off along with the other 100 knives i own. But still cant wait
My knives come out of my pockets a lot because of work and Microtech makes one of the best clips out there. It makes it so much easier to locate when putting it away blind and makes it easy to get out of the pocket because you have something to grab instead of pants. Anyways, love the channel.
I’m going to be patient and get one of these at some point in the next couple of years.. Of course they could take a break from making Microtechs and make more of these but we all know that won’t happen 😉
The clip is just fine. What is stupid however, are the two screw heads sticking up way too high inside the top of the clip. Those catch the pants a bit. I am holding mine right now while sitting at my desk. I like it. But there is just something about the design and shape of the handle that is just a big "NO" for me. Most knives just melt into my hand and are comfortable. Even Chinese made knives. I don't know what it is, but this handle just is not friendly or comfortable. Hard to put words on exactly.
Did you mention the blade material? I must’ve missed that. Yes the stitch is more satisfying to open as you know.. if I was gonna say anything negative it would probably be the thing that you said the most the clip , to me, the clip seems very flimsy , definitely need a tighter clip on there . Other than that I think it’s perfect for a knife.😂 feels good in my hand, and I guess that’s all that matters. Thanks
I'm a righty who used to carry lefty. The reason why I did it at the time was I would often have something held or pinched or whatever in my right hand, and then I'd find I needed to cut a strap loose or something, but only my left hand would be free.
Thinking back to the manix 2 it spydie flicks well and I remember thinking to myself man that lock release is hard to press. So I guess that answers my question the stronger spring in the manix 2 makes it flick better. Hope Microtech realizes this and makes a heavier replacement spring.
Bought on and wasn’t too impressed. Mine had lock stick, basically no detent and the clip was crap. The lock “button” is way to aggressive. It’s heavy and not practical for every day use. Sold it for $300 and never thought about it again.
I usually agree with you, especially concerning pocket clips. The only time I like that particular clip is on the Dirac, because it is so light I carry it clipped to my shirt and it really works great on thinner fabric. This knife is good for 250 but only because it's US made and a microtech. I should like it more but I just don't feel it. Passing it along.
@@juddhalenza8297 sorry it's already gone. The hype is in full throttle mode. I didn't even have to list it, I know three people still waiting, people are paying double and don't bat an eye. I sold mine to a buddy for what I paid ... Just like he did for me on the factor:)
I wish companies would stop using bearings. There is nothing wrong with washers and in my experience, washers can be just as good, if not better. I'm one of those few that work in a very sandy/dusty and at times muddy environment and bearings do not enjoy that. I also run my knives dry (no oil) and prefer lock stick. Oil will attract more dirt and grime and lock stick is kind of an extra safety measure. I guess I'm weird...lol.
I just used my ultratech for the first time! I've had it for 3 weeks 😂. Got a kydex sheath for my Leatherman oht from Amazon and used il my Microtech to open the package
I'm the same as your brother, right handed but keep my knife in my left pocket. I use my phone way more than I use my knife, so only my phone goes in the right pocket. Knife, pen and lighter go In the left pocket.
My mini Freek Benchmade kind of got gunked up. It was not drop shutty or openy anymore. So I watched the Nick shabazz video with the trick on how to open up the Benchmade style lock without opening up everything else I was able to clean it all out and works nice now but yeah pocket lint will happen 😊
good luck getting one, they sell out stupid quick and are re-sold WAAY above cost. There are bots that buy em all up. I was lucky to score one tho, tan with brass coating...also it is STUPID easy to take apart!
Thanks again for your time and effort to make Microtec and Tony Marfeion more money!😂😂😂 There is no way everyone will be able to get one of these for the next 5 or 10 years!
Lol what planet are you living on? Have you been to any retailer at all? They all have a crap load of microtechs in stock in various price ranges. It’s a brand new knife. Give them a few months and they’ll be everywhere.
I sympathize with your brother. I am mostly right hand dominant but carry my knife in my left pocket. My mother is 100% right handed and my father is 100% left. So I inherited a bit of both. I do almost everything right handed but shooting. I shoot left so for me a small flashlight in my right pocket and the knife in my left feels right.
I suspect the reason they did not conceal the spring to prevent debris entry is because they wanted to show off the mechanics of their unique system. Brand marketing, cool factor, another layer of tactical on the tactical…
Sharp knife by MT. They have super cool gear year round. I don't see the slowing down for a long time. I hope they are planning to make a lot of this model. Price isn't that bad either.4 inch blade as well! Sweet.
Just bought some stickers just because of the comment on the tactical folks. Lmao. You had me laughing even though I am waiting to be running and gunning right now. Lmao.
M390mk is just m390 with mk at the end . Coming from the same guy that made sure we saw the 'a' at aus10a and that 10 is 2 more than 8 on the demkos. Microtec will start making more knives in China if this knife shows that to be insignificant
I love a good knife that has beauty, function, quality materials and made with care. But, I’d never pay more than $125 for an every day carry knife… However I do like looking at them.
I agree with the gloves debate. It's counter intuitive to make knife work better with gloves for those 3 times you open ot with gloves. On. If those people are that worried, THEY GET THE AUTO! Save money and time as well
$250 is definitely more than I'd like to pay, but considering all the other knives I really like are $400+, this is definitely a contender, if it's in stock when I'm feeling spendy.
Microtech must have seen the succeed protech has had with their manual button lock knives sheet being primarily known for autos. Being that both companies are at the top of the field in their particular type of mechanisms, I’m not surprised that microtech threw their hat in the ring and made two awesome manual knives with another fidgety, strong, well love locking mechanism. It’s a super smart move and their current price on these definitely competes with the Malibu and somewhat the mordax.
At the beginning of the video I decided to take a drink every time you said tactical because I knew you'd be saying it a few times here..... It was a mistake.
But you don’t absolutely have to tactical the tactical to appreciate the ability to use with gloves. At work we have to wear cut resistant gloves and it’s nice not to have to take one off just to use my knife so I like it for that.
Man that thing is firing on all cylinders! I'm afraid it's just racey, modernistic and "space cadet" enough to quickly fall out of favor with me though. I've learned that more traditional or classically styled knives will stand the test of time with me while more contemporary and high tech looking knives do not. Guess theres only one way to find out. Gimmie thit knoif!
I only reverse flick mine to open. Thumb opening is a little awkward. The reverse flick is super easy to do if you place your finger as close to the pivot as you can. MC has a retarded reverse flick. 🤣
My Amazon page! The gear I use here on the channel! - www.amazon.com/shop/metalcomplex
Thanks so much for watching! You can support my channel on Patreon here - www.patreon.com/metalcomplex
MC stickers! - www.redbubble.com/people/metal-complex/shop?asc=u
Hey blade he has a few terzoula autos in magnacut it’s the jungle fat carbon not the brass but I thought I’d let you know
Do your brother maybe carry his phone in his right-side pocket? Maybe he doesnt want to scratch it up? Not that I can relate to your brother or anything..... :P
I love, love, love that blade! One of the nicest looking blades Ive seen.
I ended up getting the polymer handle variant, it took a bit of time to find availability. I will say of everything great about this knife, it was actually the polymer handle. This is by far the most incredible execution of polymer I’ve ever experienced. It’s contoured and textured, warm to the touch almost like micarta, but most impressively THERE IS NO FLEX! Absolutely shocked me and now I’m holding all other USA knives using polymer to a much higher standard.
Thank you for this comment! I was worried about the the handles. Can’t wait to get it in hand!
Phenomenal knife
I think that the pricing here is obviously strategic. The $250 price point is where people who are generally not fans of something, and is the top end of "I should try this maybe" " it's a great deal, everyone says so I think I'll miss out if I don't buy this". And I do 1000% think that the price tag is going up or the other option is that they will have much , much cooler variations for a lot more money.
I think it’s priced that way to compete with the protech Malibu. It’s literally an almost direct competitor from two typically auto companies. Just with two different, equally fidgety locking mechanisms.
SOP
I totally agree
I think more expensive variants is probably the most likely scenario. Being Microtech, I’d expect to see some 4-500 dollar knives with some signature elements and special finishes around this time next year. Probably a handful of mirror polished 2,000 dollar Marfione “custom” variants as well.
It’s way overpriced. I have 100$ knives that are just as good
I was lucky enough to pick one up. The action was horrible when I first got it. I ended up taking it apart to figure out why. Turns out the coating they apply to the blade was also coating the blade where the lock interfaces. I hand polished the blade along the lock interface with a diamond stone, added some KPL in the pivot bearings and it runs smooth as glass. I don't know if I would call the "lock stick" real stick. The disengagment does require the slightest of force, but it's been extremely consistent and is much improved with the polishing. The blade swings freely with the lock disengaged. Skiff does not make a caged bearing that will fit this massive pivot, but the shipped bearings do a great job and you can literally hear the bearings rolling as the blade is actuated. The blade material does seem to be better than the standard M390..still super sharp as the day I got it and I've been using the heck out of it..tactical cardboard cutting!
I also got an EXO-M and as much as I want to carry it, the MSI has been my goto ever since I got it. EXO-M is my desk fidget tool.😅
Love the info you give here. I wonder is taco bearings makes something that would fit this. I have them on a zt 0562cf and they are absolutely amazing
Yea mine had kind of crappy action from factory, so as all us knife nuts do, I tore it apart and cleaned it and re lubed it with nano and now it's amazing! I think the lube they use is garbage, so a little nano fixes all! :)
Yeah I hate that there's not enough tension and you drop your knife and the blade just popped open.
I picked my copy up recently and it is the "new and improved" version with the frag milled texturing on the handle, and reviewed it. Pursuant to the clip, I have read somewhere in the past, before this knife came out, that Microtech uses that clip as a two-stage where it can go partially into the pocket, or all the way into the pocket. This gives the user the option of having more to grab to "tactically" remove the knife or choose a deep carry option. Snarky, nice review! 😅🗡️👍
I have a Stitch with the ram-lok best knife never I've ever held and last night I found the exact MSI I wanted. Frag G10 with an apocalyptic plain edge. Very excited for that to come in
This is just about the most reasonable Microtech I've ever seen. A "mini" with a 2.75-3" cutting edge would be cool, but I won't hold my breath, haha.
I would never have looked at this knife except a vendor had one at a recent gun show in my town. I didn't know Microtech made a manual. It's the polymer with the black coating on the blade. I kept going back by the booth to handle it and finally picked it up at a good price. I love it! Great quality and steel, made in the USA. It is a beast! Keep going back to it to carry just because it works! Carries smaller than it is.
I think this is a really solid starting point for Microtech to build on their crossbar-style platform. It definitely has some kinks that need to be worked out, but luckily none of them are deal breakers, at least for me.
Just a guess but $250 must be for the G-10 handle version because I just purchased one with the polymer handle for $175. And honestly, I'm glad I went with the polymer. Which at first was due to its availability and the lowest price point I could find, but now its because the handle is just so impressive. I'm a lefty so I appreciate when a company does a fully ambidextrous model knife which with the MSI has been done exceptionally well. The contours are nice and even with great texturing. Lock up is solid, giving it a strong and robust feeling in hand. I mean, this thing is legit. Overall, I'm just stoked I found one, but now knowing it was worth every penny, well that's pretty cool, too.
I just got my first MSI and this is the only knife I have a problem Spidey flicking. Came here to see if that was an issue. So glad it’s not just me. Overall seems like a great knife for the price.
I have the FRN version. Basic black. First of all, I jumped at the first picture and told my seller I wanted one. I didn't bother checking the rest of the page. Secondly, even if I had checked the entire page and had seen the other versions, I think I still would have settled for the version I got. The reason? Price. PM2 price. Mine developed a lot of lock stick initially. Now it's stick free. I love it.
I’ve been seeing everyone’s videos on theirs and they look a tad different than mine. Mines has 2 extra screws by the stop pin. Was that part of the changes they made along with the clip?
Picked up the all black version. Thing is way bigger than I expected but I love it.
Little tip if your finger is just barely resting on the lock button when you deploy the blade it neutralizes the lock stick. Also as long as you don’t deploy the blade like you’re cracking a whip, it will not stick.
Lol.
I just picked up the polymer version on a trip up to Vermont this last weekend. It was 160 after taxes... Im very impressed with it. Absolutely worth the money.
I guess I am one of those rare weirdo’s that uses a folder in a tactical environment. Having ambi clip and lock mechanism is a must for me. My holster sits directly over the pocket that I would normally carry a knife so I either carry it in my opposite side or below the holster in a cargo pocket. The blade shape also makes alot of sense to be able to cut folks out of webbing/seatbelts with little risk of cutting them. Great review, this one is definitely on my “get” list.
Got mine through the service personnel program. 190 delivered. Mine has an aggressive texture in the scales and I do not detect any lock stick. Way bigger than I thought it would be. Home run for me.
I’ve been a fan of Microtech, and Metal complex reviews for years.
What do you like more? The msi or the ram stitch?
MC once said he liked the Stitch better, I believe. I would prefer the stitch blade as well. Though I’ll buy whichever I can first.
definitely gonna be picking one of these up, but I think I'm gonna wait until they come out with a CF variant, maybe they'll increase the "detent" a little by then.
I believe they have a CF variant coming soon
I don't know where to post the question.... I have watched A LOT of your content and there is never anything Gerber on your talks. I'm just curious. I don't feel a particular way about it, I only have two of their knives I believe. One is an auto that I beat the brakes off of. Are the knives really that substandard??
I am surprised and pleased the Microtech got this knife under $200!!! Sure, they’re injection molded polymer scales. However, as soon as aftermarket scales are available I’m getting some, and at about $180 it’s easier on the pocket!
Great to see microtech getting into more manual stuff and its made in America
Super easy to take apart and put back together. My MSI puts the blade back into perfect centering every time. My favorite knife. Almost nothing he says here is accurate.
So, I actually do need washers because I work with corrosive chemicals, gritty junk, occasional sandbags…basically the whole spectrum of knife-ruining goodness. How the hell do I shop specifically for washer knives? No website will let me sort/filter by washer vs bearings.
Check for a disassembly video for the knives you really want. Also, most $50 minimum knives have at least Teflon washers. There’s also a secondary market for bearings and washers that may have solutions for your problems. Good luck!!
CRK my man.
I work in the same environment and this works well for me. The bearings are ceramic so chemicals don't have much effect. Just a can of air or dawn dish soap if it's real bad and your good.
Skiff bearings has washers and bearings at skiff made blades
just picked one up from local AD and over paid but I dont mind, this will be my main EDC for a while the action reminds me of the Benchmade Anthem but without the Ti acoustics. CF scales OTW.. pretty excited for that. You are the OG of knife reviews ! thanks for the video.
This is a an awesome knife! It became my new EDC, replacing a ZT 562CF. It comes incredibly sharp out of the box and the fit and finish are perfect. I love that style of blade as it has a very usable edge and a very strong tip. It opens smoothly and easily with just a flick of the wrist. I added a little bit of lube to the lock and the rounded part of the blade to make opening even smoother. M390 is an awesome steel and M390MK is very similar. The best part is the incredible value of this knife (polymer version) at only $177. This knife is way better than Benchmade’s Axis lock which i carried for a while (710) McHenry and Williams.
The 0562 is a phenomenal knife. Idk why i gave mine up. But also have one og these here just cant have it untill christmas. Just recently got a special efition factor b2 with a timascus clip so itl have to hold me off along with the other 100 knives i own. But still cant wait
If they make a compact version (3") I'm FOR SURE buying one, that would be the best EDC imo.
My knives come out of my pockets a lot because of work and Microtech makes one of the best clips out there. It makes it so much easier to locate when putting it away blind and makes it easy to get out of the pocket because you have something to grab instead of pants. Anyways, love the channel.
Love mine the scales were kinda sharp I used a rough piece of cloth and rubbed the edges nice and smooth much better!
I’m going to be patient and get one of these at some point in the next couple of years.. Of course they could take a break from making Microtechs and make more of these but we all know that won’t happen 😉
Wonder if a stiffer coil spring would solve that small "detent" issue.
The clip is just fine. What is stupid however, are the two screw heads sticking up way too high inside the top of the clip. Those catch the pants a bit. I am holding mine right now while sitting at my desk. I like it. But there is just something about the design and shape of the handle that is just a big "NO" for me. Most knives just melt into my hand and are comfortable. Even Chinese made knives. I don't know what it is, but this handle just is not friendly or comfortable. Hard to put words on exactly.
Just picked one up and got to say I really like it. No lock stick on the one I got so that's a plus!
Did you mention the blade material? I must’ve missed that. Yes the stitch is more satisfying to open as you know.. if I was gonna say anything negative it would probably be the thing that you said the most the clip , to me, the clip seems very flimsy , definitely need a tighter clip on there . Other than that I think it’s perfect for a knife.😂 feels good in my hand, and I guess that’s all that matters. Thanks
Will be interesting to see how pricing and variations play out.
I put a stiffer spring in mine and the spydie flick is among the best I’ve felt on a knife.
Where did you get it? Direct fit?
Manix spring?
On axis style locks I like to pull back on the crossbar and flick my wrist a bit to open it
I'm a righty who used to carry lefty. The reason why I did it at the time was I would often have something held or pinched or whatever in my right hand, and then I'd find I needed to cut a strap loose or something, but only my left hand would be free.
The T 20 pivot fastener as well as that lock barrel man!!! Beefy or tactical 😉
Would a heavier spring help give more detent and help the flipping out ?
Thinking back to the manix 2 it spydie flicks well and I remember thinking to myself man that lock release is hard to press. So I guess that answers my question the stronger spring in the manix 2 makes it flick better. Hope Microtech realizes this and makes a heavier replacement spring.
I agree. Either that or needs a cam redesign on the detent to make it stay closed more strongly. Maybe in connunction with a slightly stronger spring.
Bought on and wasn’t too impressed. Mine had lock stick, basically no detent and the clip was crap. The lock “button” is way to aggressive. It’s heavy and not practical for every day use. Sold it for $300 and never thought about it again.
I want to get one e to try out. How would you compare it to my personal favorite, the AD20S? -) Peace, Stiletto :-)
I usually agree with you, especially concerning pocket clips. The only time I like that particular clip is on the Dirac, because it is so light I carry it clipped to my shirt and it really works great on thinner fabric. This knife is good for 250 but only because it's US made and a microtech. I should like it more but I just don't feel it. Passing it along.
I’ll take it off your hands if you’re interested in selling
@@juddhalenza8297 sorry it's already gone. The hype is in full throttle mode. I didn't even have to list it, I know three people still waiting, people are paying double and don't bat an eye. I sold mine to a buddy for what I paid ... Just like he did for me on the factor:)
This is the first folder on my radar in quite a while. Really want one.
10/20/23
Blade hq have them in stock for 177.00
10/21 and they're gone 😅
I like the clip, it's carried over from their otf's
PIVOT TO PIVOT COMPARISONS MAN great vid probably gonna pick one up soon
"Whoo Hoo, crazy ski jump bill!" You crack me up :) keep up the good work
Always wondered, why not just read the stats on it instead of measuring it? And weight etc
I wish companies would stop using bearings. There is nothing wrong with washers and in my experience, washers can be just as good, if not better. I'm one of those few that work in a very sandy/dusty and at times muddy environment and bearings do not enjoy that. I also run my knives dry (no oil) and prefer lock stick. Oil will attract more dirt and grime and lock stick is kind of an extra safety measure. I guess I'm weird...lol.
I just used my ultratech for the first time! I've had it for 3 weeks 😂. Got a kydex sheath for my Leatherman oht from Amazon and used il my Microtech to open the package
I'm the same as your brother, right handed but keep my knife in my left pocket. I use my phone way more than I use my knife, so only my phone goes in the right pocket. Knife, pen and lighter go In the left pocket.
Lock stick is actually a good thing in knives like this. It nearly garuntees it wont fail on you
I love mine, just ordered some carbon fiber scales from votix
My mini Freek Benchmade kind of got gunked up. It was not drop shutty or openy anymore. So I watched the Nick shabazz video with the trick on how to open up the Benchmade style lock without opening up everything else I was able to clean it all out and works nice now but yeah pocket lint will happen 😊
good luck getting one, they sell out stupid quick and are re-sold WAAY above cost. There are bots that buy em all up. I was lucky to score one tho, tan with brass coating...also it is STUPID easy to take apart!
everyone is crazy about micarta, but i think i like g10 more, it looks classy
Thanks again for your time and effort to make Microtec and Tony Marfeion more money!😂😂😂 There is no way everyone will be able to get one of these for the next 5 or 10 years!
Lol what planet are you living on? Have you been to any retailer at all? They all have a crap load of microtechs in stock in various price ranges. It’s a brand new knife. Give them a few months and they’ll be everywhere.
I sympathize with your brother. I am mostly right hand dominant but carry my knife in my left pocket. My mother is 100% right handed and my father is 100% left. So I inherited a bit of both. I do almost everything right handed but shooting. I shoot left so for me a small flashlight in my right pocket and the knife in my left feels right.
I suspect the reason they did not conceal the spring to prevent debris entry is because they wanted to show off the mechanics of their unique system. Brand marketing, cool factor, another layer of tactical on the tactical…
Do you say ATM machine or PIN number? Those drive me nuts too 😂
Hoping I can grab an MSI in the next year or so. Gonna have to be patient on this one.
I like it. But I think I'll wait till gen 2 or a smaller version. I'll believe the price when I see it on dealer's sites.
I hope they make a mini MSI
Can't wait till these are stocked to get one, good to hear it's metal complex approved !
I freaking love the look of this knife, I think it's the wharncliffe
Such a good-looking knife. I hope that they get the quirks worked out. And can produce them on a larger scale. NOW that's a useful knife!!¡
The msi is U.S. made
@experienceprecision5406 thanks for the info sir!
Locked and loaded for this Nutnfancy Feature Length knife review.
Oh wait…wrong channel
Just ordered mine...it was sold out for months !
I actually like the filler tan just adds a little something there instead of just some holes
"Unless you are tacticalling so hard...." lmao! You're the best.
Sharp knife by MT. They have super cool gear year round. I don't see the slowing down for a long time. I hope they are planning to make a lot of this model. Price isn't that bad either.4 inch blade as well! Sweet.
Microtech has came out with a special edition ultratech with magnacut it would be awesome if they started using it in all their knives.
Is there any spring assist on the opening?
Don't really get this one. Fine knife, but the micromania hasn't infected me for whatever reason.
I want to get the stitch with this lock.
I hope flytanium does some scales for it.
"It's M390 with a top hat..." I love this description!
All I needed to hear was I’m going to buy one, from MC!
Did not expect to see a Charlie reference in this video lmao
Just bought some stickers just because of the comment on the tactical folks. Lmao. You had me laughing even though I am waiting to be running and gunning right now. Lmao.
M390mk is just m390 with mk at the end . Coming from the same guy that made sure we saw the 'a' at aus10a and that 10 is 2 more than 8 on the demkos. Microtec will start making more knives in China if this knife shows that to be insignificant
Loving my green frag MSI
Anything over 7" w/desmopoint s is to big for me to carry. I have to carry my blades. I like it though.
My ad20s has lock stick so bad I can’t shut the knife. Literally can not shut it. Takes tools
I love a good knife that has beauty, function, quality materials and made with care. But, I’d never pay more than $125 for an every day carry knife… However I do like looking at them.
Now, why would people ever even look into direction of Benchmade when something like this exists
Benchmade know how to make very attractive knives and the brand is strong. Their marketing department is top notch.
Marketing? Hell no can berly find them quality yes.!@@tempofugo168
That's like saying why would anyone even look at a Dodge when Chevy exists.
I also don't want to pay $250 for baby shit soft m390.
The lock implementation looks good, really accessible. Would like to see 3” blade model in this style.
The Osborne 940 is a gorgeous knife tbf
I agree with the gloves debate. It's counter intuitive to make knife work better with gloves for those 3 times you open ot with gloves. On. If those people are that worried, THEY GET THE AUTO! Save money and time as well
$250 is definitely more than I'd like to pay, but considering all the other knives I really like are $400+, this is definitely a contender, if it's in stock when I'm feeling spendy.
Microtech must have seen the succeed protech has had with their manual button lock knives sheet being primarily known for autos. Being that both companies are at the top of the field in their particular type of mechanisms, I’m not surprised that microtech threw their hat in the ring and made two awesome manual knives with another fidgety, strong, well love locking mechanism. It’s a super smart move and their current price on these definitely competes with the Malibu and somewhat the mordax.
No matter the price it's going to be hard to get like their other folders.
At the beginning of the video I decided to take a drink every time you said tactical because I knew you'd be saying it a few times here..... It was a mistake.
But you don’t absolutely have to tactical the tactical to appreciate the ability to use with gloves. At work we have to wear cut resistant gloves and it’s nice not to have to take one off just to use my knife so I like it for that.
The guy you got the knife from is a nerd! Love his desk mat lol!
The first couple sites that these dropped on are already $150 over MSRP.
Man that thing is firing on all cylinders! I'm afraid it's just racey, modernistic and "space cadet" enough to quickly fall out of favor with me though. I've learned that more traditional or classically styled knives will stand the test of time with me while more contemporary and high tech looking knives do not.
Guess theres only one way to find out.
Gimmie thit knoif!
If someone drilled a hole in the top of that lock and tapped it for a thumb stud you’d have a Shark Lock ish deployment method
20:40 You know they could have put on a glass breaker too...... shhhhh! 😁👍
Man this would’ve been sooo sick if it was reverse flick friendly, such a missed opportunity. I’m sure it’ll still sell, just not to me bc of that k
I only reverse flick mine to open. Thumb opening is a little awkward. The reverse flick is super easy to do if you place your finger as close to the pivot as you can. MC has a retarded reverse flick. 🤣