I dont know about an automotive radiator but i know there are some people that have set up a cooling fan of some sort for them. I havent personally had any overheating issues with mine.
I have a groundhog kh14G, essentially the same machine. I added blower fans to the side vents to draw air in and keep the pump and engine cooler. It gets "burn your skin" hot in the summer sun and that helps a ton. If you're digging stumps, i like the pick, tooth, attachment. I can rip a bush out in about 3 to 4 minutes with it and it leaves a much smaller hole when you're done. Lots of bolts will probably loosen up on you. Get some blue locktite and apply liberally. Also, dont skip that break in oil change. Its essentially.
@SpicerDesignsLLC I can't remember exactly, but I know a company broke off from Groundhog. I thought it was Kymron, but I may be remembering it wrong. I think they both originally ordered from Hightop machines in China. I know Nick from Groundhog, a long time operator and equipment guy, worked one on one with the manufacturer to have certain areas reinforced and upgraded, so he would have a superior product to the normal imported machine. From what I've seen, Kymron has done very similar upgrades. So I don't believe Kymron is at all an inferior machine. I've only worked with Nick when I bought my machine, but he was a true blue collar, honest, shake your hand and stand by his product type of guy....so I'm partial to Groundhog. But I'll admit I'm biased based on my experience. 😁
@@JamesThomas-dn6hz ive heard good things about Groundhog. I did consider them but i got a better feeling from Kymron. And yes kymron is the one your thinking of as far as your first point.
As a former owner of a Kubota U-25 mini X (that I sold, as I thought I was thru with projects, then I bought another 30 acres...) one of these would be a step down, BUT, for the price, I am getting very interested, as I really miss the U-25. I operate a 30 ton boom truck for a living, and when I found a 1400 pound counterweight was a factory certified (important, gotta keep it legal) option, I bought one, and it makes all the difference in what I can safely do with it, stability wise. It would be very simple to install more counterweight on one of these, carefully and with testing. Too much counterweight could be bad. I've got bids out for shipping one to Idaho, but I could also drive there and carry it in my 1 ton flatbed, no trailer, small as it is.
That was a good display of the machines capabilities. It takes time but as I always say, it's better and faster than a shovel! Usually less blisters involved with that also.
Andrew Camarata just posted a video in which he tests out a very similar micro excavator. He really puts it to the test in typical Camarata style and it performed surprisingly well.
hes at least honest enough to show its shortcomings and to reveal the real price for these machines. they run about 4k not 8k, they cant lift a load high enough to be of any real use.
@DieselRamcharger ?? the auction machines are 4k. They also dont have a warranty and may not even start. The Kymrons and groundhogs come with a warranty and parts availability. And they are $8500. Not hiding anything here.
Like the uses of the kymron ! I am just like you constantly woking on projects on the property and like the content that you put out. I have a langmuir XR table as well and enjoy working metal projects. Keep up the good videos!
Powerful little guy. I think that extending the blade out some would help stability. Also, I think a rear suitcase weight bracket would help. Weights would be removable for service or when tail swing is a concern. I'm trying to decide on buying a similar excavator or a 1025r2025r TLB.
I rented a wacker Nelson about that size to put a drain around my daughter's house. I was trying to clean out a small section and the bank caved off and dropped one track in the ditch. No big deal. I swung the bucket around to lift the track out and it didn't have power enough to lift the track out of the ditch! I think I will buy one like yours for the next time!
Awesome little machine. Was really considering a Struck magnatrack. But, for the money this may be a better and certainly cheaper way to go. Looking forward to seeing it put to some more work. Cool!
@chestypuller4591 this is better than a magnatrack in my opinion. The other thing is the attachment options like concrete breaker, auger, and a few other things
When you ger 62 years old, if your lucky enough to make it that far, all that jumping around stops .Flush type fittings are used in aircraft . They will not get sheared off upon impact. You are working in mud, You put bigger equipment in there it might get stuck. A real disadvantage for any equipment. Thank you for the video I 'm interested in buying one of these. I am very impressed with your video.
@@edregister4530 ive since decided bot to rent it due to liability concerns. I actually sold both of my chinese machines and bought a larger bobcat. They are very capable though.
Great video, sometimes I'll cut the trees down below the ground, leaving the stump and roots keeps the ground more stable especially on a hill. Also steel tracks would give it more weight 🤷
I had one of the Chinezium units for about 6 months. I thought that adding weight to the base and maybe extending the front blade out 6 inches would have made it ride and perform a little better. Great video today.
Great demonstration. I’ve been considering one of those but my only hesitation is digging in the hard Texas clay. Since Abilene doesn’t get a lot of rain the clay dries out and is almost like digging in rock. I’ve rented the small Bobcat E20 excavators to dig 40+ mesquite tree stumps out and dig trenches for water lines; but that machine seems to be a lot smaller and a whole lot lighter. I can’t wait to see you dig a big deep hole with it; that’ll will give me a good idea which one I should consider.
I was going to dig a hole in the video too but it was so soft i thought it really wouldnt be a good judgment of its capabilities . I have some hard clay i can dig in when it drys out.
It’s crazy what you did with that “machine”. I thought I was shopping for a 5-6 ton “machine”, but seeing what you’ve done, I’m really wondering if I should go this direction instead!! Awesome video Kyle! - - J.Andre. / Old Iron Acres
Awesome video really testing out its capabilities. I’m sold I’d love to have for my fire wood business bucking up logs as well as just odds and end jobs u could get into with it is endless
I like the 14 but it just doesn’t have enough ass. The 42 is still my choice for an investment machine. Thank you for the video, good stuff, and I like that there’s no bullshit editing out equipment quirks. It is what it is! I’ll be back.
I wish manufacturers would have a telescopic counterweight. Think of a man lift that telescopes out. This would give maneuverability of a zero swing with the counter weight of a tail swing.
It does have a pretty decent counterweight. Im guessing is a couple hundred pounds. Not many of the 1 ton units have them but Kymron adds them to theirs.
I would like to see a comparison doing the same work with your bigger mini ex. If you could do the same size area and digging the same size stump just to compare the time difference between the two.
I've never run an excavator, so please disregard my comment if it's stupid. I've watched many videos on these. The first tree you were digging out and the machine was bucking made me think. Im pretty sure i saw someone say on another video that if you turn the tracks around so the blade is behind you and put it down, it may not buck as bad
As far as ethanol free, absolutely worth it for all small engines! Especially ones where the fuel will suit for awhile. Ethanol in lament terms attracts water out of the air which then mixed with the fuel and water is heavier so it sits down at the bottom of the tank where the fuel is drawn from! Another tip, go get some StarTron from napa or wherever you can find it there. Mix that with the fuel, don't use Stabil that crystallizes. The Startron will help any water that does get in there burn off. When you buy ethanol free at the pump if it's a shared pump there's a good chance you'll get ethanol from the hose. I buy VP brand pre canned 5 gal is best value but still expensive $80.-100. A can.
That little thing definitely has more power then weight. If it were my machine I'd probably try to figure out how I can add more weight to the back to help it from tipping over with a heavy load. Maybe something simple like a weight rack to hold tractor style suitcase weights, that can be removed very easily if I need be. Also I'd be looking into installing a axillary 12v electric fan to help pull the heat out of the engine bay.
When you were working the "machine", were the tracks in the extended position? Also, Andrew Camarata released a video this week on the super cheap mini-X and he was working the snot out of it. Check it out. These little guys can absolutely do a lot of work for the money. Randy
I have an 2023 AGT Q12 (bought for 4,200.00) same thing Andrew Camerata got and i have been to the KYMRON facility in Muskogee Oklahoma. I pulled in their with my trailer and AGT on the trailer and compared the Exact model in this video because i thought the same thing. Austin at K&R let me unload my machine and do a side by side comparison to 2 of their 14 series machines. Both of them were way smoother than the AGT! The KYMRON also seemed to have more weight without a doubt. My AGT did not even have a counter weight was first thing i noticed. I also measured the pump on the AGT and KYMRON. The KYMRON pump was over 1/2" longer. Ultimately I sold the AGT last month and just bought the KYMRON XH20D and have been more than impressed and will have update videos soon.
I have the RH14-3 made a set of clamp on forks for the blade. They are about 30 in long. Inabilities me to dig out stumps , rocks . Etc. With out lifting the backend up at all.
As one who worked with a corporate company in heavy equipment, the needle zirc fittings serve their applications but that machine would be great with a 500-800lb counterweight on the rear to offset the fulcrum and provide better safety to the operator. As your video shows, maybe something you would like to mention to kymron. 🤙
Great video with the new "MACHINE"! -on average how long do you spend editing your content- just curious, your videos are always top notch! -what the heck is a wood yard? Lol firewood or an area to dry out wood slabs?! Cheers for Canada 🇨🇦
Thanks Chad! It takes about 12-14 hrs to edit a video. Sometimes longer. Thabks for the compliment on the editing. Woodyard could be both. Anything wood related for the most part. Thats where i will split wood and store it for heating our home
Looks like the little Kymron could use a larger counterbalance. Might be a fun project to build a steel-framed counterbalance using the Langmuir. How big of a market is there for rentals like this? Did you have to get special insurance or are you offering supplemental insurance for folks who buy and break it?
Ya bigger counterweight would help. I havent got everything set up with the renter agreement and insurance yet. Ill have updates on the channel as i go through that process
I have been enjoying your Excavators series of videos. The 14 G seems to be an impressive little machine. (Machine😂). Curious to see how the renting thing works out for you. I considered this as well but with having owned Chinese stuff before I was wondering if the machine would pay for itself before breakage. Good thing is seems easy enough to repair especially with your metal working skills. Either way good luck and keep them coming. I enjoy seeing the two different size machines work to their capacity. Also have enjoyed watching people compare them to namebrand machines of similar size.
I know zero turn is always a selling point, but I think those mini mini excavators desperately need a healthy counter weight. The sacrificed turning radius would make the machine so much more capable.
That's a handy little compact. Some of those tree stumps were calling for some tannerite though. 💣 BTW - Do you have a new swale work you need to do on the property? If so, would like to see what 'machine' you'd use. 🍻
I would pay the rental fee, Just to get to know that beast and also do your yard work. Seriously I would set up ten and rent for a few days you film and be the fore man.
Pro tip - no need to use ethanol free gasoline. Use regular gas and add Marine Stabil and Marvel Mystery Oil to it manufacturer’s recommendations. You’ll never have fuel problems if you do. I run small outboard motors that are prone to fuel issues. Using regular gas treated as directed will rarely cause fuel related problems.
The teeth are bolt on so you could just remove them to get a smooth edge. I talk about that in the next video too. And the hydraulic thumb is standard on the Kymrons
The Kymrons come standard with the hydraulic thumb. I actually just posted a video going over the whole machine and Kymron. Good info if your in the market.
They get stuck real easy and the front blade makes it near impossible to just push out with the bucket in certain situations. It’s a good machine you just have to always grade the ground to make it stable
That "MACHINE" is a little power house! Wow, the Kioti got mentioned 👏 😂 Any deer on your property? Great video kyle just needs beer and boobs to push it over the top haha.
Ya it really is. No beer this month and the boobs were busy running around with the girls. Shell be back soon. We do have a lot of deer. Havent seen any big bucks though.
@SpicerDesignsLLC ya after seeing your wooded area seems like a good area for deer. Dry January ouch. Well instead of doing a cheers ill give you a fist 👊 pump.
Here is what i was told. The bigger the machine the faster you can get done. But the machine cost more. The smaller the machine. Will take longer to do a job. But the machine does cost less. I used a ht10b for almost 2 years.
This model is optional with extendable tracks. I didnt get them. Just have to know the capabilities of the machine. Longer blade means less reach. They do have larger models too that offer more stability.
Hey Kyle! Few things.. Your going to kill yourself in that thing bwhahah. Better have a 40 hour safety course if you are going to rent it out 🤪😜. BTW I got the Hat!! Thanks. But noticed a few irregularities. First went down to the drive way to get it, then came up stairs, open the box, put it on and fell down the F*&k^ing stairs. I was so Pi$$ed off that I went to the machine, no i mean the machine, Machine... REFRIDGERATOR dammit! and got a Keystone light. That's all for now... got to take my new MiG welder that i bought for some dam reason and repair the effen branch that fell off the dam tree in the wind last night! Why am I cursing?
You'd be better off with a stumper attachment rather than the bucket for cutting roots. There's a lot more power in the slender blades of the stumper than the bucket in such work. Hopefully, Kymmar makes the stumper too. Otherwise I'd never recommend this little unit for stump removal as it would be dangerous for the average Joe. For ditching and pickup using the thumb it looks impressive though.
Interesting. Looks like a toy, acts like a toy. So tiny. Seems like it need some additional weight. I’m a firm believer in buying bigger than I think I need. I’ve never regretted that. Good review though. Thanks.
Hey Kyle another great video! How much does that Kymron weigh and what is the actual horsepower? Oh yeah…for the dismounts on & off the machine…I give you a 9.6 Haha!
Thats specifically a motocross gas can from when i used to race. My bike didn’t run off diesel. If it were any other style fuel can i would completely agree with you. Glad thats what you got out of this video though.
Why do you think ethanol burns hotter? It doesn't. Don't get me wrong it's way better to run ethanol free fuel. Ethanol it terrible for engines and efficiency.
For more info on the KYMRON check out Microtrackhoe.com or Parsleyequipment.com.
Really enjoy your videos. Subd. Just one question. Can't an automotive radiator fan be fitted to increase cooling of the engine?
I dont know about an automotive radiator but i know there are some people that have set up a cooling fan of some sort for them. I havent personally had any overheating issues with mine.
@@SpicerDesignsLLC I meant the fan not the radiator, but I see your point. Thanks.
@@Akira-nw4jl ya that could work. Sorry i misunderstood.
Guessing you are sponsored lol. I get mine by june sometime. I hope they as good as you guys make them seem.
Typically a machine that size has way more power than weight to handle what it can dig and pull. Very cool to see it in use. Thanks!
I'm getting one of these (not the exact brand) tomorrow. Getting a bit excited.
Congrats! Youll have fun with it
Nice little fig, thanks for posting.
I have a groundhog kh14G, essentially the same machine. I added blower fans to the side vents to draw air in and keep the pump and engine cooler. It gets "burn your skin" hot in the summer sun and that helps a ton.
If you're digging stumps, i like the pick, tooth, attachment. I can rip a bush out in about 3 to 4 minutes with it and it leaves a much smaller hole when you're done.
Lots of bolts will probably loosen up on you. Get some blue locktite and apply liberally.
Also, dont skip that break in oil change. Its essentially.
Thanks for the info. I do plan on getting or building a ripper tooth for sure. Definitely the right tool for stump removal
How do you compare Kymron to Groundhog? Both are really good but Groundhog seems to have slightly better prices.
@@Akira-nw4jl theyre basically the same units. Both companies are making the same upgrades to the chinese machines for the most part.
@SpicerDesignsLLC I can't remember exactly, but I know a company broke off from Groundhog. I thought it was Kymron, but I may be remembering it wrong. I think they both originally ordered from Hightop machines in China. I know Nick from Groundhog, a long time operator and equipment guy, worked one on one with the manufacturer to have certain areas reinforced and upgraded, so he would have a superior product to the normal imported machine. From what I've seen, Kymron has done very similar upgrades. So I don't believe Kymron is at all an inferior machine. I've only worked with Nick when I bought my machine, but he was a true blue collar, honest, shake your hand and stand by his product type of guy....so I'm partial to Groundhog. But I'll admit I'm biased based on my experience. 😁
@@JamesThomas-dn6hz ive heard good things about Groundhog. I did consider them but i got a better feeling from Kymron. And yes kymron is the one your thinking of as far as your first point.
As a former owner of a Kubota U-25 mini X (that I sold, as I thought I was thru with projects, then I bought another 30 acres...) one of these would be a step down, BUT, for the price, I am getting very interested, as I really miss the U-25. I operate a 30 ton boom truck for a living, and when I found a 1400 pound counterweight was a factory certified (important, gotta keep it legal) option, I bought one, and it makes all the difference in what I can safely do with it, stability wise. It would be very simple to install more counterweight on one of these, carefully and with testing. Too much counterweight could be bad. I've got bids out for shipping one to Idaho, but I could also drive there and carry it in my 1 ton flatbed, no trailer, small as it is.
Thanks for the demo, I learned how to mount and dismount the proper way. It's a beast for sure. I want one.
Great demo work using the Kymron track hoe. Pretty good for a small unit.
Thanks for sharing.
Wow - I'm super impressed with what you can do with that Briggs powered gasoline mini ex. I never would have guessed. Excellent demonstration. -Chad
Thanks Chad! Im with you on that one. I didnt expect it to be that capable
That was a good display of the machines capabilities. It takes time but as I always say, it's better and faster than a shovel! Usually less blisters involved with that also.
I agree. We’ve all experienced the blisters.
Andrew Camarata just posted a video in which he tests out a very similar micro excavator. He really puts it to the test in typical Camarata style and it performed surprisingly well.
Ill have to check that out. Someone else mentioned that too in the comments
hes at least honest enough to show its shortcomings and to reveal the real price for these machines. they run about 4k not 8k, they cant lift a load high enough to be of any real use.
@DieselRamcharger ?? the auction machines are 4k. They also dont have a warranty and may not even start. The Kymrons and groundhogs come with a warranty and parts availability. And they are $8500. Not hiding anything here.
I classify this machine as something I wouldn’t buy, but I would definitely rent it. Great demo!
Nice machine! Thanks for posting! 👌👍
Thanks for watching!
Great job, enjoy watching, from WARM (relatively) Jacksonville, FL
Thanks Jim. Florida sounds good right about now
Love the content! Always enjoy watching your videos.
Thank you !
Subscribed. Thanks for the content. I just might have to check these out.
Thanks for the sub!
Like the uses of the kymron ! I am just like you constantly woking on projects on the property and like the content that you put out. I have a langmuir XR table as well and enjoy working metal projects. Keep up the good videos!
Thanks Jeff. Id love to have the XR. Hoping to upgrade soon. I do have a cool metal project im starting on this week. Should be a cool build.
Powerful little guy. I think that extending the blade out some would help stability. Also, I think a rear suitcase weight bracket would help. Weights would be removable for service or when tail swing is a concern. I'm trying to decide on buying a similar excavator or a 1025r2025r TLB.
I rented a wacker Nelson about that size to put a drain around my daughter's house. I was trying to clean out a small section and the bank caved off and dropped one track in the ditch. No big deal. I swung the bucket around to lift the track out and it didn't have power enough to lift the track out of the ditch! I think I will buy one like yours for the next time!
Wow thats surprising it didnt have the power. I think mine has too much lol!
Looking good. I like your property.
Thank you!
Was that a Highlights book? Such a Dad!
Great job on your videos always fun to watch very inspiring to go out and invest in ourselves. Great job.
Thank you! And thats great to hear.
Awesome little machine. Was really considering a Struck magnatrack. But, for the money this may be a better and certainly cheaper way to go. Looking forward to seeing it put to some more work. Cool!
@chestypuller4591 this is better than a magnatrack in my opinion. The other thing is the attachment options like concrete breaker, auger, and a few other things
Good point. Didn't consider attachments. @@ifyoutip
When you ger 62 years old, if your lucky enough to make it that far, all that jumping around stops .Flush type fittings are used in aircraft . They will not get sheared off upon impact. You are working in mud, You put bigger equipment in there it might get stuck. A real disadvantage for any equipment. Thank you for the video I 'm interested in buying one of these. I am very impressed with your video.
Thanks for the feedback. Its been a good little machine. I have some others that talk about all the specs too
Im a NIPPLE fan also !
Thank you for sharing!
I need one of these !!
beautiful property, you're blessed man! 👍 oh yeah, and nice machine. :D
Thank you. Working hard to improve it. Should look good in a couple years or so
Thanks for the video. I've been considering buying one of these for rental a well. How much do you rent it for in your area and how well does it rent?
@@edregister4530 ive since decided bot to rent it due to liability concerns. I actually sold both of my chinese machines and bought a larger bobcat. They are very capable though.
Super nice !
Great video, sometimes I'll cut the trees down below the ground, leaving the stump and roots keeps the ground more stable especially on a hill. Also steel tracks would give it more weight 🤷
I had one of the Chinezium units for about 6 months. I thought that adding weight to the base and maybe extending the front blade out 6 inches would have made it ride and perform a little better.
Great video today.
Ya thats a good idea. A little more counter weight would only help
I’m a little impressed with that small of a machine. Definitely could use a little wider tracks. Keep up the good work.
Great demonstration. I’ve been considering one of those but my only hesitation is digging in the hard Texas clay. Since Abilene doesn’t get a lot of rain the clay dries out and is almost like digging in rock. I’ve rented the small Bobcat E20 excavators to dig 40+ mesquite tree stumps out and dig trenches for water lines; but that machine seems to be a lot smaller and a whole lot lighter. I can’t wait to see you dig a big deep hole with it; that’ll will give me a good idea which one I should consider.
I was going to dig a hole in the video too but it was so soft i thought it really wouldnt be a good judgment of its capabilities . I have some hard clay i can dig in when it drys out.
That would be great to see; but don’t go out of your way if you don’t need a big hole.
It’s crazy what you did with that “machine”. I thought I was shopping for a 5-6 ton “machine”, but seeing what you’ve done, I’m really wondering if I should go this direction instead!! Awesome video Kyle! - - J.Andre. / Old Iron Acres
I was pretty surprised myself. Its a very capable machine for its size. Thanks for the comment and good luck with whatever machine you decide on
Awesome video really testing out its capabilities. I’m sold I’d love to have for my fire wood business bucking up logs as well as just odds and end jobs u could get into with it is endless
I honestly looked past these little gas units when i was looking into them. No that ive used it im pretty impressed.
Yea I was the same way I was skeptical but seeing somehow like ur self use if putting it through the test it looks like a solid MACHINE
I like the 14 but it just doesn’t have enough ass. The 42 is still my choice for an investment machine. Thank you for the video, good stuff, and I like that there’s no bullshit editing out equipment quirks. It is what it is! I’ll be back.
Thank you! The 42 is a nice machine. I would love to upgrade to that one in the future. Unfortunately my truck cant tow that heavy.
So, one of these would be better than a shovel and a wheelbarrow?
Some type of outriggers and it would be a beast...😮
Very nice Video, Kyle. I'm soo impressed of this toy of an excavator! This telephone pole was no joke. Hydraulics are a miracle invention.
Thanks! I was pretty impressed with it.
I wish manufacturers would have a telescopic counterweight. Think of a man lift that telescopes out. This would give maneuverability of a zero swing with the counter weight of a tail swing.
@@matthewferguson2515 Some large cranes have just that, counterweights that extend out, depending on the load.
Enjoy your videos on the 1 to kymron. Question? Does it have counter weight on the back of it? If so how much do you think? Thanks!
It does have a pretty decent counterweight. Im guessing is a couple hundred pounds. Not many of the 1 ton units have them but Kymron adds them to theirs.
I would like to see a comparison doing the same work with your bigger mini ex. If you could do the same size area and digging the same size stump just to compare the time difference between the two.
I do have a video planned to compare the two. Just have to get some decent weather. Thanks for the suggestion
I've never run an excavator, so please disregard my comment if it's stupid. I've watched many videos on these. The first tree you were digging out and the machine was bucking made me think. Im pretty sure i saw someone say on another video that if you turn the tracks around so the blade is behind you and put it down, it may not buck as bad
If your pushing it would help. If your pulling toward the machine you want the blade in front.
@@SpicerDesignsLLC thank you
As far as ethanol free, absolutely worth it for all small engines! Especially ones where the fuel will suit for awhile. Ethanol in lament terms attracts water out of the air which then mixed with the fuel and water is heavier so it sits down at the bottom of the tank where the fuel is drawn from! Another tip, go get some StarTron from napa or wherever you can find it there. Mix that with the fuel, don't use Stabil that crystallizes. The Startron will help any water that does get in there burn off. When you buy ethanol free at the pump if it's a shared pump there's a good chance you'll get ethanol from the hose. I buy VP brand pre canned 5 gal is best value but still expensive $80.-100. A can.
Great info! Thanks Sean
We need a Spicer Designs: Machine shirt
Already in the works buddy
why not a Spicer Designs: Machine skirt also?
That little thing definitely has more power then weight. If it were my machine I'd probably try to figure out how I can add more weight to the back to help it from tipping over with a heavy load. Maybe something simple like a weight rack to hold tractor style suitcase weights, that can be removed very easily if I need be. Also I'd be looking into installing a axillary 12v electric fan to help pull the heat out of the engine bay.
Good ideas. It does have a counter weight. Maybe i can add on to it.
When you were working the "machine", were the tracks in the extended position? Also, Andrew Camarata released a video this week on the super cheap mini-X and he was working the snot out of it. Check it out. These little guys can absolutely do a lot of work for the money. Randy
My machine doesnt have the extendable track option. Kymron does offer that those models though. I didnt want renters jacking it up.
I have an 2023 AGT Q12 (bought for 4,200.00) same thing Andrew Camerata got and i have been to the KYMRON facility in Muskogee Oklahoma. I pulled in their with my trailer and AGT on the trailer and compared the Exact model in this video because i thought the same thing. Austin at K&R let me unload my machine and do a side by side comparison to 2 of their 14 series machines. Both of them were way smoother than the AGT! The KYMRON also seemed to have more weight without a doubt. My AGT did not even have a counter weight was first thing i noticed. I also measured the pump on the AGT and KYMRON. The KYMRON pump was over 1/2" longer. Ultimately I sold the AGT last month and just bought the KYMRON XH20D and have been more than impressed and will have update videos soon.
@@TomLance-zl6fc thanks for sharing. Great info
I have the RH14-3 made a set of clamp on forks for the blade.
They are about 30 in long.
Inabilities me to dig out stumps , rocks . Etc. With out lifting the backend up at all.
Good idea!
As one who worked with a corporate company in heavy equipment, the needle zirc fittings serve their applications but that machine would be great with a 500-800lb counterweight on the rear to offset the fulcrum and provide better safety to the operator. As your video shows, maybe something you would like to mention to kymron. 🤙
Great video with the new "MACHINE"!
-on average how long do you spend editing your content- just curious, your videos are always top notch!
-what the heck is a wood yard? Lol firewood or an area to dry out wood slabs?!
Cheers for Canada 🇨🇦
Thanks Chad! It takes about 12-14 hrs to edit a video. Sometimes longer. Thabks for the compliment on the editing. Woodyard could be both. Anything wood related for the most part. Thats where i will split wood and store it for heating our home
Looks like the little Kymron could use a larger counterbalance. Might be a fun project to build a steel-framed counterbalance using the Langmuir. How big of a market is there for rentals like this? Did you have to get special insurance or are you offering supplemental insurance for folks who buy and break it?
Ya bigger counterweight would help. I havent got everything set up with the renter agreement and insurance yet. Ill have updates on the channel as i go through that process
I have been enjoying your Excavators series of videos. The 14 G seems to be an impressive little machine. (Machine😂). Curious to see how the renting thing works out for you. I considered this as well but with having owned Chinese stuff before I was wondering if the machine would pay for itself before breakage. Good thing is seems easy enough to repair especially with your metal working skills.
Either way good luck and keep them coming. I enjoy seeing the two different size machines work to their capacity. Also have enjoyed watching people compare them to namebrand machines of similar size.
Thank you. I have more videos coming once the weather cooperates.
Oh and you forgot to fall in this video…😂
I know. Too muddy
Couldn't find a convenient pile of dog crap :)
He did make a super KYMRON jump! And you can tell he is not 6’-5”.😮
I know zero turn is always a selling point, but I think those mini mini excavators desperately need a healthy counter weight. The sacrificed turning radius would make the machine so much more capable.
That's a handy little compact. Some of those tree stumps were calling for some tannerite though. 💣
BTW - Do you have a new swale work you need to do on the property? If so, would like to see what 'machine' you'd use.
🍻
I'm not sure I'm sold on the idea of that being a rental machine. It's gonna spend more time on its side than anything else.
I would pay the rental fee, Just to get to know that beast and also do your yard work. Seriously I would set up ten and rent for a few days you film and be the fore man.
Pro tip - no need to use ethanol free gasoline. Use regular gas and add Marine Stabil and Marvel Mystery Oil to it manufacturer’s recommendations. You’ll never have fuel problems if you do. I run small outboard motors that are prone to fuel issues. Using regular gas treated as directed will rarely cause fuel related problems.
That has some impressive hydro power. Be nice to have some more weight but I guess that's why there's a larger model 😂
Pretty sweet
Is the modern small engine like in that escalator.
It's designed to run ethanol fuel
What work boot would you recommend for that entry & exit?
Definitely Thorogoods
You going to make a little grader attachment for that one too? Was the hydraulic thumb and upgrade, most I see just bolt in place.
The teeth are bolt on so you could just remove them to get a smooth edge. I talk about that in the next video too. And the hydraulic thumb is standard on the Kymrons
For a little guy, it has some good action.......That's what she said.......
Hah! Its all in the hydraulics
@JLCustomBuilders hah! That too
did this unit come with the hydraulic thumb? most i see are fixed mechanical tbumbs
The Kymrons come standard with the hydraulic thumb. I actually just posted a video going over the whole machine and Kymron. Good info if your in the market.
Just general build and capabilities, has anyone used both the kymron and the rippa like mike festiva reviewed? Just looking for opinions.
They get stuck real easy and the front blade makes it near impossible to just push out with the bucket in certain situations. It’s a good machine you just have to always grade the ground to make it stable
Like you channel. And you’re a little funny. 😂
Thanks! We have a pretty good variety on the channel. I try to keep it entertaining.
That "MACHINE" is a little power house!
Wow, the Kioti got mentioned 👏 😂
Any deer on your property? Great video kyle just needs beer and boobs to push it over the top haha.
Ya it really is. No beer this month and the boobs were busy running around with the girls. Shell be back soon. We do have a lot of deer. Havent seen any big bucks though.
@SpicerDesignsLLC ya after seeing your wooded area seems like a good area for deer. Dry January ouch. Well instead of doing a cheers ill give you a fist 👊 pump.
Just like a tractor, add counter balance weights to the rear end.
It does have a counterweight. Could use a little more
How much can that one lift vs the AGTH15?
I have No idea what the agth15 can lift.
So this machine doesn't have the retractable tracks?
Not mine. They do offer it as an option.
14:19 I take it the stick jammed into the engine guard didn't cause any damage?
I did find a stick broke off in the guard. Luckily no damage.
Did you purchase any additional attachments or the quick attach for your RH14G?
I did not. I might look into an auger for it.
Like the intro 😂
Well looks skinny enough to get through a personal gate to back yards. Be interesting to see how stable it is?
Here is what i was told. The bigger the machine the faster you can get done. But the machine cost more.
The smaller the machine. Will take longer to do a job. But the machine does cost less. I used a ht10b for almost 2 years.
check our oil? are you sure? is that what the manual says? :P
And make extenders to make it wider too,
This model is optional with extendable tracks. I didnt get them. Just have to know the capabilities of the machine. Longer blade means less reach. They do have larger models too that offer more stability.
Are these backhoe or cat controls?
Cat controls. They dont have a valve to switch either.
Good I like cat controls
Hey Kyle! Few things.. Your going to kill yourself in that thing bwhahah. Better have a 40 hour safety course if you are going to rent it out 🤪😜. BTW I got the Hat!! Thanks. But noticed a few irregularities. First went down to the drive way to get it, then came up stairs, open the box, put it on and fell down the F*&k^ing stairs. I was so Pi$$ed off that I went to the machine, no i mean the machine, Machine... REFRIDGERATOR dammit! and got a Keystone light. That's all for now... got to take my new MiG welder that i bought for some dam reason and repair the effen branch that fell off the dam tree in the wind last night! Why am I cursing?
Hah! Thanks for the laugh Rich. Your probably cussing because your wearing the hat.
He should extend the dozer blade out about two foot for more stability
I think it'll do everything except the mud.
Looks like typical Ohio weather
I’m torn between two thoughts. Is Kyle saying Escavator on purpose to mess with my brain or is it a regional dialect.
Bad habit. Half the time i say it right, the other half i dont.
@@SpicerDesignsLLC I thought it might be the beginning of a new “machine”
You'd be better off with a stumper attachment rather than the bucket for cutting roots. There's a lot more power in the slender blades of the stumper than the bucket in such work. Hopefully, Kymmar makes the stumper too. Otherwise I'd never recommend this little unit for stump removal as it would be dangerous for the average Joe. For ditching and pickup using the thumb it looks impressive though.
They do offer a ripper tooth for it. I just wanted to beat on it a bit and see what it was capable of. But yea i agree with you.
800 feet will exceed its warranty time
Looks like you have more power than stability on machine. I would e afraid of flipping over compared to other machines.
Its not bad. Just have to learn its limitations like anything else. It does have more power than i expected
Interesting. Looks like a toy, acts like a toy. So tiny. Seems like it need some additional weight. I’m a firm believer in buying bigger than I think I need. I’ve never regretted that. Good review though. Thanks.
Hey Kyle another great video! How much does that Kymron weigh and what is the actual horsepower? Oh yeah…for the dismounts on & off the machine…I give you a 9.6 Haha!
Hah thanks. I have a video coming out Wednesday with a complete overview of the machine. I believe its a 14hp and 2200lbs to answer your question
never never put gas in a YELLOW gas can,, Yellow is for Diesel only...
Thats specifically a motocross gas can from when i used to race. My bike didn’t run off diesel. If it were any other style fuel can i would completely agree with you. Glad thats what you got out of this video though.
Why do you think ethanol burns hotter? It doesn't. Don't get me wrong it's way better to run ethanol free fuel. Ethanol it terrible for engines and efficiency.
Ethanol free gasoline burns cooler and cleaner than ethanol gas. Ive heard that for years and looked it up. Its true
Ok, you are obviously not in communist California. Regular gas is like at or near $5 a gallon.
Wow! Thats awful.
Would have loved to watch this video, unfortunately I don't appreciate foul language. Had to give it a thumbs down.
Im not too worried about it. Its a weening process for sensitive viewers.
Excavator not escavator
All the work i put into these videos to help inform people just to get my grammar corrected….nice. And i am saying excavator.
Too much talking in your video
You must be an expert at this. I checked out your channel to see how its done and theres nothing there.
Can you give me link how i can get to my house for that price .thanks.
I have the website links in the description. Should be one punned in the comments too.