How To Use Momcozy S12 Pro: Complete Guide including Assembly, Setup and Tips
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2023
- If you’re new to the Momcozy S12 Pro, then this how to use Momcozy S12 Pro guide is for you!
In this video I am going to walk you through every step of using the Momcozy S12 Pro, from the different parts to assembly to the controls, so you can use your S12 pump with confidence.
GET 15% OFF MOMCOZY BY USING THE CODE: PUMPINGMILK
momcozy.com/products/momcozy-...
Whether you’re new to Momcozy wearable breast pumps or a long-time user that is looking to improve your pumping experience with tips and tricks, this guide on how to use Momcozy wearable pump is your key to unlocking a stress-free and successful pumping experience with the Momcozy S12 Pro.
✨D I S C O U N T S ✨
Check out my exclusive pump discounts here:
➡️ pumpingmilk.com/discounts/
FTC: I receive a small commission from the product links above. I appreciate your support! This is not a sponsored video. All opinions are my own.
#Momcozys12pro #momcozys12 #BreastPumpReview #MomcozyReview #momcozy
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 5](http://i.ytimg.com/vi/g5wpgeAIzMs/mqdefault.jpg)
The best video about explaining the momcozy s12 even better then the official website momcozy❤, thank you honey, a mum from Algeria
Wow thank you so much for your kind words 💖 So glad I could help!
Bonjour moi aussi étant maman nouvellement et je suis algérienne également je vis à Alger et je voulais savoir si vous êtes satisfaite du momcozy 12s et si il est effectivement efficace comme on le voit en vidéo merci pour vos informations @chaimamellal8959
My thoughts exactly! So glad I found this video 😊
@MelissaReist thank you ❤
من فضلك منفهمش اللغة الانجليزية اذا ممكن تفهميني وش ندير بني رفض صدري نحاول نمدلو بيبرو ساعدني من فضلك
Thank you! So helpful!
Thank you for the lovely feedback ❤ So glad it was helpful!
Very helpful, thank you!
Thanks so much for the lovely feedback! So glad it was helpful 💖
Thanks for such an informative video 🙏🏽
Glad it helped 😊
Thank you for the detailed explanation question is it safe to sterilise it in bottle steeiliser
Thanks for the question, it's recommended to boil only on their website, but you may want to double check with their customer service. I know you can use the Momcozy microwave steam sterilization bags with the S12 Pro.
Such a live saver thank you so much! ❤
So glad it helped! 💖
Thank you. The momcozy video was not as helpful. This is the first time I located the arrow on the flange.
That little arrow can be tricky to see unless you know it's there! Thanks for the great feedback!
Greet video. The manufacturer’s instructions are crap
So glad it was helpful ❤ Thanks for sharing!
@@pumpingmilkthanks again ❤
How do we set up the memory ? Or does it automatically just do what you did the time before
It will automatically go to the last settings 😊
Hello. Do s12 pro really have the memory function? You do mentioned it at ur blog
Yes - it saves your previous pump settings. You can see it at the 5min mark in the video :)
@@pumpingmilk we dont need to set? Is it auto?
@@izzyanzulkhafli711 Yes correct. When you turn it on, it will be set at your last pumping session settings (mode and suction strength). If you switch modes from expression to stimulation or vise versa , it will be also be on the last suction strength setting you had for that mode. It basically means when you start on a mode, you don't need to click through all the suction levels to find your favorite.
@@pumpingmilk thanks a lot! Momcozy doesnt emphasize this memory function on s12 pro tho
I had no idea it had flange sizes until i bought it. It hurts a little when i try to pump. Is there anything i can do about that, please? ( i really want to enjoy pumping)
So sorry you're having issues. I'd recommend measuring your nipple size and then if needed, you can buy additional flange insert sizes via Momcozy on Amazon: amzn.to/3SVNsvI (affiliate).
They have size 15mm, 17mm, 19mm, 21mm, 24mm, 27mm available.
These will insert into the 24mm flange, so you only need the insert in the correct size and that will fit into the flange.
@@pumpingmilk thank you so much
I just ordered it
Fingers crossed that does the trick 🥰
@pumpingmilk it's working alot better now
No pain like before
I use momcozy s12pro and experience milk leaking. Is there any way to avoid that?
If it's leaking from the pump, and you've checked that it's put together correctly with firm seals, then it could be that the flange or valves need replacing.
@@pumpingmilkI had that problem as well the first time. The flange needs to be pushed further onto the cup edge more.
Any tips on how to keep it in place?
When I put them in my bra, they are 90 degrees upright. By the end of the pumping session, they are turned inward (not a full 45 degrees), and the motors are touching.
I never have milk leak, I've got a good seal. It's just annoying that they don't stay upright while I'm moving around.
Any tips?
That does sound annoying! Have you tried wearing a tighter pumping bra with it?
I have a sports bra style one that I can tighten the straps on, so I'll give that a try.
Hopefully that does the trick🤞
How can get small flinge sizes ?
You can buy them via Amazon: amzn.to/3SVNsvI (affiliate).
They have size 15mm, 17mm, 19mm, 21mm, 24mm, 27mm available.
These will insert into the 24mm flange, so you only need the insert in the correct size and that will insert into the flange.
Anyone experiencing pain while pumping and how to sort that out. Please reply. Thanks in advance.
My first recommendation is to check that you have the correct flange size, you may need to use a flange insert if you are not already.
Where to add the flange ?
You add the flange insert into the breast shield (where your nipple goes).
How do you pour the milk out?
There is a little pouring spout at the top of the flange. I like to remove the pump motor first, and then you can pour the milk out from the pouring spout. Leave the flange attached to the cup to make it easier to pour. Hope this helps.
@@pumpingmilkthank you!!! That helped so much! Thank you for this video. You explained in such detail. Thank you!
Thank you for the lovely feedback! So glad I could help!
So you don’t have to boil the parts to sterilize? Just hot water and soap ?
Thanks for asking! You will need to first wash in warm soapy water and then sterilize before use.
@@pumpingmilk thanks for this video. Would it be possible to make a video on how to sterilize and clean the pump? There is barely information on Momcozy website and youtube and this is an important step, a lot of moms are asking for this information on forum and I cannot find a clear answer anywhere. Thanks a lot for you great content :)
@@aureliesaiz242 great suggestion! Thank you!! I will try get up a video this week if I can :)
Just published the How to clean and sterilize Momcozy Pump video for you :) Hope this helps!! th-cam.com/video/_mPFv4kMYfI/w-d-xo.html
Oww thank you so much❤
Does this pump not work well unless it’s fully charged?
It works the same whilst it has battery charge (low or fully charged).
Thank you! I am having so much user error with it
@faithporcella oh no 😢 What's the specific issues and I can try help?
Thanks so much for the offer! I am setting the pump up correctly making sure the duckbills are positioned right and it’s doing the suctioning but it’s not getting any milk from me. It’s very frustrating! But I have plenty of milk to actually breastfeed, use the Hakka and my regular wall pump.
@faithporcella I can imagine how frustrating this is for you. Have you checked your flange size is correct for your nipple measurements? If the flange size is too big all too small it can have a big impact on the volumes of milk being pumped.
My second suggestion is to play around with your suction levels. The highest won't necessarily produce the most milk. Start low (on a level 2) then work your way till you find a level that is comfortable and produces the most milk. You can also try similar with the modes (just because the stimulation mode is for let down doesn't mean you can't try it for your whole pumping session - your body might prefer the shorter suction cycles).
Hopefully this helps 😊
How to prevent milk from getting into the motors??
It is a closed system so the milk isn't exposed to the pump motor 😊
Somehow my motors got milk in them and I’m still trying to figure out how and why! 😢
@TheRebelChronicles could it have happened during the pouring process? When pouring the milk into your storage container?
It’s possible. I think the tricky part after removing the pump from the boob is removing the motor carefully before pouring the milk out. I got a replacement now so I’m trying to avoid the same happening to my new motors!
@@TheRebelChronicles so glad you could get a replacement. And yes it's a little tricky to get use to, but hopefully it starts feeling a bit easier for you!
If needed, you can buy additional flange insert sizes via Momcozy on Amazon: amzn.to/3SVNsvI (affiliate).
They have size 15mm, 17mm, 19mm, 21mm, 24mm, 27mm available.
These will insert into the 24mm flange, so you only need the insert in the correct size and that will fit into the flange.
if i am 18mm does the one that comes with it on amazon fit me?
@cweindustrygala my S12 pro did not come with additional flange inserts, but this may have changed? You could ask on the Amazon listing to confirm.