How to Build a DIY TRUCK BED Camper for under $125!!

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ส.ค. 2024

ความคิดเห็น • 127

  • @simondiamond001
    @simondiamond001 11 หลายเดือนก่อน +3

    Sir, you are a legitimate dude!! This video was EXACTLY what I needed. My head was spinning with ideas of having to sew together a ripstop fabric tent for my project, it never even occurred to me to use a full tarp sheet like this. I have converted the floor of a SWB Transit Connect van to pull out to the extreme length of the open barn doors (with another panel that then flips up to create an enclosed space. Now, with your great advice I can cover the back and have myself a nice little micro-camper. Thank you.

    • @lukeshaia
      @lukeshaia  11 หลายเดือนก่อน

      So glad it could help you out!!

  • @dennismullens41
    @dennismullens41 หลายเดือนก่อน +1

    You can use rare earth magnets on the outside of the tarp to help secure the tarp to the body of the truck.

    • @lukeshaia
      @lukeshaia  หลายเดือนก่อน

      That’s a good idea!!

  • @kyletodd9037
    @kyletodd9037 2 ปีที่แล้ว +8

    turned out great, looks like more room than standard camper shell

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      Thank you! Yes very spacious!

  • @jthawken123
    @jthawken123 ปีที่แล้ว +2

    Dude.
    1. I never thought of opening up my tailgate and adding that to the usable space. Brilliant.
    2. That adhesive zipper. What rock have I been living under? Never knew those existed!! That's a tarp truck camping game changer!
    This video is exactly what I'm trying to do. Only difference is I've built my frame out of scrap 2x4, just because. Everything else is applicable to what I'm wanting to do, especially shaping the tent to fit around the frame I made. I'm so glad you made this video to show how you did that.

    • @lukeshaia
      @lukeshaia  ปีที่แล้ว +2

      So glad it gave you some ideas and that you’re building one yourself! Thank you for the support!

    • @simondiamond001
      @simondiamond001 11 หลายเดือนก่อน +1

      The self adhesive zippers were new to me as well. Then when I looked into it turns out illegal weed growers have been using them for years! 😂😂

    • @lukeshaia
      @lukeshaia  11 หลายเดือนก่อน

      @@simondiamond001 hahahah sick

  • @toddshook1765
    @toddshook1765 ปีที่แล้ว +1

    Great idea. Enough to get out of weather. Like any other tent wind may play havoc on you but with extra tape can fix on the fly.
    Thanks for sharing about the zipper; makes it easier to enter.

    • @lukeshaia
      @lukeshaia  ปีที่แล้ว

      I wanted to add some sort of tie down for that very reason. Just so wind wouldn’t blow it away.

  • @roseericson3828
    @roseericson3828 ปีที่แล้ว +6

    Ok this is a pretty great build! A couple suggestions maybe purchase a black or white tarp so your tape matches your tarp. I believe gorilla tape comes in white too. A camouflage tarp with black tape would also look a little less tarpy. If your stick it together with small pieces of tape you can remove it from the truck and use long pieces to make it more uniform. That being said this is quite possibly the best diy truck video I have seen.
    One thing also you should go on cad and make a pattern for the tent and make it a Available to your patrons or something because it’s really good.
    I liked and subscribed 😎 keep up the good work!

    • @lukeshaia
      @lukeshaia  ปีที่แล้ว

      Appreciate the support and very cool suggestions!

    • @14bqdonk
      @14bqdonk ปีที่แล้ว

      subjective

  • @ajonnieq2002
    @ajonnieq2002 ปีที่แล้ว +1

    BRILLIANT MATE. YOU THINK LIKE ME... WELL DONE...

  • @bhghavoc6453
    @bhghavoc6453 ปีที่แล้ว +1

    Genius! Love this video I was looking for ideas for camping out at an upcoming Renaissance fair in Tennessee. I want to spend money on a hotel and have 2 kids. I plan to attach a 23'x17' tarp to a 10x10 canopy. It's gonna be dope thanks for the video!

    • @lukeshaia
      @lukeshaia  ปีที่แล้ว

      Sweet! That sounds like a fun time!

  • @sarabiakristofer
    @sarabiakristofer 2 ปีที่แล้ว +4

    Awesome bro looks simple, I like how you made it square and not with a pitch. Makes it easier to assemble and honestly looks cleaner. Hopefully you can show us the finished product in action, maybe a camping video in the future with the setup? Keep up the great videos my dude.

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      Thank you! I definitely want to get out and use it!

    • @xgymratx
      @xgymratx 2 ปีที่แล้ว +1

      If you gonna make it square make one side higher than other in case it rains

    • @chadburke1938
      @chadburke1938 2 ปีที่แล้ว +1

      @@xgymratx yes. If it rains it will pond on top until it collapses.

  • @adventureswithedna
    @adventureswithedna 2 ปีที่แล้ว +3

    This is really cool. I was thinking of doing this on Edna for my channel and doing a camping adventure. Decided to see if anyone was already doing this and found your video. Thanks so much, I think I have an good idea for how to make my own.

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      Awesome! I’ll have to check it out when you get it done!

    • @garyballard3473
      @garyballard3473 2 ปีที่แล้ว +1

      A project that never ends. Windows, lights, a heater, carpet. Nice out at the nearest lake. Great job. Texas.

  • @TrailBlazer5280
    @TrailBlazer5280 3 หลายเดือนก่อน

    This is an excellent simple build. I've been camping in a regular tent in the bed of my truck and want to upgrade a bit. So im debating on a soft top or a homemade soft top, both are essentially more sturdy tents so it doesn't really matter if its home made or not IMO. A hard topper would be ideal but way too expensive. Anyway these are some great ideas an techniques, great job

    • @lukeshaia
      @lukeshaia  3 หลายเดือนก่อน +1

      Thank you!

  • @GQ3MindSpeaks
    @GQ3MindSpeaks ปีที่แล้ว +1

    Awesome build. I have to finagle this design because I have a Tacoma. No holes in the truck bed. I do have a suggestion. Incorporate a mosquito net on the inside.

    • @lukeshaia
      @lukeshaia  ปีที่แล้ว +1

      Thank you! I do like the net idea, help keep bugs out!

    • @GQ3MindSpeaks
      @GQ3MindSpeaks ปีที่แล้ว

      I just watched another diy TH-camr. And I believe his diy engineering will work well with your design. I’m including the link. I’m going to be using your video and his to make my truck bed tent and the one he made as well! I truly appreciate you taking your time. My children are getting older and I have to seize the rest of the days I have until they leave the nest!
      th-cam.com/video/H1516IAqihQ/w-d-xo.html

  • @c-hawkins4358
    @c-hawkins4358 2 ปีที่แล้ว +1

    Just what I was looking for. I liked the way you put the video together, great job all around. Thank you

  • @MMunnerlyn1
    @MMunnerlyn1 2 ปีที่แล้ว +1

    Super fun project. Great job!!

  • @CleoCoal
    @CleoCoal 2 ปีที่แล้ว +2

    Good job just used your link to get the zipper going to do this on my cargo trailer thanks.

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      Awesome, thank you!

  • @larryswindell5906
    @larryswindell5906 2 ปีที่แล้ว +1

    Very well done. You read my mind. Was looking for something exactly like this.

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      Thank you! Glad I could show you what it would look like!

  • @drennonkeller7262
    @drennonkeller7262 ปีที่แล้ว +1

    I did the same thing but with a ridge/pitch pole on top like a roof because when it rains it will collect and cave in the middle

    • @lukeshaia
      @lukeshaia  ปีที่แล้ว

      Did you have it connected to the side poles or was it support by the middle of the bed?

  • @AmericanPatriotANomad
    @AmericanPatriotANomad 2 ปีที่แล้ว +1

    Wow I like this

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว +1

      Thank you!

    • @AmericanPatriotANomad
      @AmericanPatriotANomad 2 ปีที่แล้ว +1

      @@lukeshaia I’m gonna try it and post my results Your Welcome

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      Awesome! I look forward to see how it turns out!

  • @go5582
    @go5582 ปีที่แล้ว

    Hi handsome. Great channel and product. Thanks ❤

  • @temp6156
    @temp6156 ปีที่แล้ว

    Looks great, something to remember is that you’ll have no air flow inside. If it starts raining you can’t prop to tarp up to get any air inside.
    I made something very similar a few years ago and had the same problem.
    Other than that it looks great and I hope it works out for you.

  • @peterpiper487
    @peterpiper487 ปีที่แล้ว +2

    I'm wondering how well it holds up to a storm while out camping? I'd love to build this, but I need something that will hold up to a downpour and stormy weather.

    • @lukeshaia
      @lukeshaia  ปีที่แล้ว

      With a little reinforcing and more of a way to strap it to the truck, should be good to go!

  • @CleoCoal
    @CleoCoal 2 ปีที่แล้ว

    I'm subscriber number 98 looking forward to seeing this in use.

  • @lightcatcher3
    @lightcatcher3 ปีที่แล้ว

    nice and simple

  • @dorcasowens1210
    @dorcasowens1210 2 ปีที่แล้ว +2

    Great idea. Do you travel with it installed!? Or assemble it when you get to your destination? You could use a pool noodle slipped over each upright at the square holes to make it fit tighter!

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      I like that idea! I don’t travel with it installed, I made it to utilize the bed still.

  • @paulnortness1354
    @paulnortness1354 2 หลายเดือนก่อน

    Nice concept, but I am concerned with the flat roof.....any rain is gonna pool up and cause a lot of weight strain on that PVC

    • @lukeshaia
      @lukeshaia  2 หลายเดือนก่อน

      Yeah, that’s why I added a decline on one side. Another good option is to add another crossmember in the middle.

  • @marcocubillos9706
    @marcocubillos9706 ปีที่แล้ว

    Awesome!!

  • @wingwalker7212
    @wingwalker7212 ปีที่แล้ว

    Great idea, except if it rains when you’re camping the flat roof will let water pool until it collapses on you. Happy Camping!

    • @lukeshaia
      @lukeshaia  ปีที่แล้ว

      It isn’t flat, there’s an angle to it for that reason.

  • @SlingShotNinja
    @SlingShotNinja 2 ปีที่แล้ว

    Great job

  • @uncle_creepy2743
    @uncle_creepy2743 2 ปีที่แล้ว +1

    pretty cool... only that zipper must leak in the rain....

    • @lukeshaia
      @lukeshaia  ปีที่แล้ว

      I haven’t had any issues 🤷🏽‍♂️

  • @mycocoaone
    @mycocoaone 2 ปีที่แล้ว +1

    Add a center pvc pipe. Nice job.

  • @14bqdonk
    @14bqdonk ปีที่แล้ว

    nice

  • @garegardner6782
    @garegardner6782 ปีที่แล้ว

    cool

  • @SlingShotNinja
    @SlingShotNinja 2 ปีที่แล้ว +1

    Water will puddle in the middle. Make it peak in the middle 🥷

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      The driver side has 2” of length on the passenger side so that there is a slope. I haven’t tried it with water, but I think that should do the trick.

  • @davevincent222
    @davevincent222 2 ปีที่แล้ว +1

    Shuold have used T's in the Middle of side to side. then a length in the middle front to back. but that works.

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      I thought about doing that, but once I had it all together I felt like it was sturdy enough to my liking.

  • @chriswright2925
    @chriswright2925 2 ปีที่แล้ว

    Lol I knew you were in utah by the tiny glimpse of the mountains

  • @ethanwatts8811
    @ethanwatts8811 10 หลายเดือนก่อน

    This looks like a great idea does it have any problems staying up while driving? That would be my only concern lol imma try it out tho

    • @lukeshaia
      @lukeshaia  10 หลายเดือนก่อน

      Yeah I wouldn’t recommend while driving, it will most likely fly away! You’ll have to let us know tho 😂

  • @johnbouwens2024
    @johnbouwens2024 11 หลายเดือนก่อน

    With a flat roof like that it won't shed rain it'll puddle and then of the weight will cave it in

    • @lukeshaia
      @lukeshaia  11 หลายเดือนก่อน

      It isn't flat 😉

    • @johnbouwens2024
      @johnbouwens2024 11 หลายเดือนก่อน

      @@lukeshaia sorry my bad... Looks flat brother

    • @lukeshaia
      @lukeshaia  11 หลายเดือนก่อน

      @@johnbouwens2024 No worries, it's subtle.

  • @SlingShotNinja
    @SlingShotNinja 2 ปีที่แล้ว

    You need to get powerful magnets to hold so the wind doesn't blow it out or blow it over

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      That’s a good idea!

  • @alekhurst
    @alekhurst 2 ปีที่แล้ว

    sickkkkkk bro

  • @WilliamsSkilliams
    @WilliamsSkilliams 2 ปีที่แล้ว

    Dope!

  • @rm-hb6ul
    @rm-hb6ul ปีที่แล้ว

    Must be in the desert that flat top tarp will never support a pool of water that will accumulate during even a light rain

    • @lukeshaia
      @lukeshaia  ปีที่แล้ว +1

      It isn’t flat, but you’re always welcome to make it more slanted for yourself!

  • @kandacepatterson7965
    @kandacepatterson7965 2 ปีที่แล้ว

    Glue gun would work on the tarp too

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      I'll have to give that a try next time!

  • @mariomederos8272
    @mariomederos8272 11 หลายเดือนก่อน

    Link to the second video 🎉🎉🎉

    • @lukeshaia
      @lukeshaia  11 หลายเดือนก่อน +1

      Only one video ☹️

  • @txladywolf01
    @txladywolf01 2 ปีที่แล้ว +1

    Hummm taking it down to store? Great idea though

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      Thank you! I wanted to be able to utilize the truck bed for other needs.

  • @coltonsheriff9438
    @coltonsheriff9438 2 ปีที่แล้ว

    Yee yee 😎

  • @oldschooldiy3240
    @oldschooldiy3240 2 ปีที่แล้ว

    How do you plan on stopping rain water from pooling on top?

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว +1

      One side is 2” taller for water to drain off.

    • @oldschooldiy3240
      @oldschooldiy3240 2 ปีที่แล้ว +2

      @@lukeshaia Does it work? Have you been in the rain with it? It doesn't seem like that would be enough with nothing in the middle....just saying....

  • @Solo-Road
    @Solo-Road 2 ปีที่แล้ว

    not bad

  • @hamphollifield6133
    @hamphollifield6133 2 ปีที่แล้ว +1

    What bed rack system were you thinking of getting that was $600. I have a Ranger and would be interested in looking to see what it is.

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      It’s from Tuff Stuff 4x4, it’s adjustable in width and they have 2 different lengths.

    • @hamphollifield6133
      @hamphollifield6133 2 ปีที่แล้ว +2

      @@lukeshaia thanks. Btw I subbed to you a little while ago. Keep the ranger videos coming. Your going to blow up one day

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      @@hamphollifield6133 appreciate it!!

  • @noonzzzy
    @noonzzzy 2 ปีที่แล้ว

    How hot does it get in the summer months? Is it unbearable with no ventilation

    • @lukeshaia
      @lukeshaia  ปีที่แล้ว

      I would recommend some ventilation and/or a fan for summer months.

  • @Dootmaster-iw3yl
    @Dootmaster-iw3yl 8 หลายเดือนก่อน

    i own an s10 and they dont come with the little holes on the bedsides 😭

    • @lukeshaia
      @lukeshaia  8 หลายเดือนก่อน

      Oh shoot, that’s unfortunate! I do like the s10’s a lot tho!

  • @joelrobichaud9163
    @joelrobichaud9163 2 ปีที่แล้ว

    If it rains water is gonna pool up

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว +1

      I thought of that too, I put some text in there - I cut one side 4” smaller than the other to help it run off.

  • @emanuelortiz5624
    @emanuelortiz5624 2 ปีที่แล้ว

    Do you take it down every time you drive or leave it up?

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว +2

      It was built to be taken down and put up in only a few minutes. I wanted to still be able to utilize the bed for other things when not camping.

  • @Daddio69er4p
    @Daddio69er4p 2 ปีที่แล้ว

    How's it handle going down the rd

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว +2

      I built it to take it down while traveling.

  • @kandacepatterson7965
    @kandacepatterson7965 2 ปีที่แล้ว

    Nice...are you in Sea Side Calif?

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      No, I'm not.

  • @MageSkeleton
    @MageSkeleton 2 ปีที่แล้ว

    i love the idea, but it could easily be torn into and the zipper function is basically "all access" without any way to lock. Definitely ONLY for camping or if your normally always going to be in a secure area or near it at most all times.

    • @lukeshaia
      @lukeshaia  ปีที่แล้ว

      Yep, I built it for camping!

  • @austinisfullpleasedontmove653
    @austinisfullpleasedontmove653 2 ปีที่แล้ว

    At 30 mph entire thing blows off.

    • @lukeshaia
      @lukeshaia  2 ปีที่แล้ว

      I built it to take it down as I travel, so I could still utilize my truck bed for other things.

  • @dram7510
    @dram7510 7 หลายเดือนก่อน

    Since it's been 2 years since this was posted, I'm guessing you have discovered what a flawed design this was. If not, then you likely haven't used it in any kind of serious rain. There is a reason why every commercially-made tent ever built has a steeply sloped top, typically either an a-frame or some kind of dome design. Same reason nearly all homes have steep roofs. The last thing you want in any kind of shelter is a roof that allows for the collection of water. What you made here was essentially a giant bird bath waiting to be filled.

    • @lukeshaia
      @lukeshaia  7 หลายเดือนก่อน +1

      Interesting take, but I’d still choose this over a couple thousand dollar tent if I just needed something quick and easy in good weather conditions. Not everyone goes camping in snow, rain or “bad” conditions. Which is what is was designed for.

  • @BinhTran-jo1df
    @BinhTran-jo1df ปีที่แล้ว

    sorry I can't do that because it's so ugly

    • @lukeshaia
      @lukeshaia  ปีที่แล้ว

      Dazzle it up some!