How To Remove: Stripped Grub Screw Removal From RC Motor Pinion
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2020
- Are you searching on how to remove stripped grub screws? I got some easy tips on how to get the grub screws or set screws off of your rc motor pinion without damaging the motor or the shaft. It's an easy way to get those stripped rc screws off.
----------------
Dremel I use: amzn.to/3gkOYUD
Cheapest dremel I could find on Amazon: amzn.to/3wzgkfr
Please note that some of the links listed here are affiliate links and help support the channel.
----------------
Watch my Vintage 1984 Tamiya Grasshopper Build Playlist: th-cam.com/users/playlist?list...
Watch my Vintage Kyosho Raider "restoration" Playlist: th-cam.com/users/playlist?list...
Watch me rebuild my Nitro Pull Start here: • First Time FIXING a NI...
Watch my short video of my USED Traxxas Slash: • Buying A USED Traxxas ...
---------------------------------------------
Stick around with me as I venture out and buy used RC Cars, rebuild them and have fun with them! Along my journey, I will be learning some RC Car tips and tricks and sharing them with you! Jacobus RC, where I buy, build and bash USED RC Cars.
---------------------
Subscribe To My RC Car Channel! -- / @jacobusrc - บันเทิง
Popular Hex Driver Sets So You Stop Stripping Screws: MIP Tools, Turnigy, Team Associated, EDS, Integy, Dynamite, Pro-Tek
Thank you for caring about the ones who will be trying this trick, by mentioning all the precautions to take, much love from California brother ❤👍🤙
Great tips thank you!!! I have run into this issue many times and the easiest way to remove a pinion from a motor is to use a flat head and pry it off. That then releases the tension on the grub screw and makes a little easier to remove.
This video helped me save my Velineon 3500 brushless motor after i stripped out the set screw on a protek 48p pinion i put on it awhile back that want to get off to fit a different pinion. This was a eye opener from me i desperately need to invest in a better tool set than using cheap drivers and rtr included allen keys.
Thanks! I had a grub screw stripped on my Val and this worked
Nice
No problem, glad it helped
Had a stripped grub screw on my mip driveshafts on my wraith. Previous owner installed them backwards. Ended up drilling the screw out just to the bottom of the threads, luckily I had a spare and was able to reinstall it from the other side of the drive shaft. Your video did inspire me to try different approaches tho. Thanks
Driveshafts are a whole other animal when the grub goes out 😂
Will a slow dremal still be able to cut down that screw and pinion
If the grub screw is protruding from the pinion , i used a pair or pliers with cutting blades on to make a notch across the screw which you can then put a flat screwdriver in and twist it out
thanks
👍🏽
subscribed
Thanks brother! You got some good bash spots I see from your vid! 🚀
Imma try glueing the alen key part into the grub screw with tire glue let it sit for a day or two and then try and get it out hope it works 🤞🤞
good luck, let me know how it goes!
@@JacobusRC haha not good lmao
Hahahah Yeah man just chop it off now with a Dremel! Ever since I upgraded my drivers too that has helped me so far, no stripped grub screws
Hey i Have a Traxxas 2 wheel Drive Bandit, ill cut to the chase, i stripped it. Im using same engine and your 12turn engine, can i gte some help? I want to put the high speed pinnion gear on it but icant take the original off!😂
Your best bet is the dremel to get it off or an easy out screw extractor. Either way you might want to get another grub screw since it’s stripped and you’re going to damage it in the process. If you don’t want to get a dremel, look in target or Walmart they usually have off brands for like $20-30 with the same exact toolkit
Just heat it up with a lighter and use a flat head screwdriver to pop it off
@@jeffl4871 does this actually work I really need help
@@jeffl4871 please respond
That's my issue. The grub screw is stripped. I've been messing with the spur and pinion gear for weeks. So frustrating.
What size pinion is it so I can get a new one?
I believe it was the stock traxxas pinion so a 14tooth at 48pitch
@@JacobusRC sounds good
I tried that earlier today. The torque driver went straight through the band.
Downside to upgrading.. the higher quality the tool the quicker your stripping those cheap ass grub screws 😅
I have this problem with my flash hider
Wish you luck fixing!
I'm in the same boat 😭😭😭😭
I’ve done that before just don’t get into the motor shaft
Easy removal.......
Next clip: DREMEL 200I
😆 pretty much 3 options, drill it out, dremel it out or heat it out ... either way you need some tools!
@@JacobusRC might dremel a slot for a flathead to fit into it