Great job. 👍 If it wasn't with the help of this, I wouldn't have been able to remove the wheel from the motor without damaging It. It helped and worked for me very well. Thank.❤
mine was stuck so hard and heat and everything we searched up didn't help but this did it MOST HELPFULL RC VIDEO EVERRRRRRRRRRRRRRRR!!!!!!!!!!!!!!!!!!!
Be very careful if you want to reuse the motor!! It might happen that you break the copper wire where it is connected at the collector! (happened to me once!)
Some are applied with heat and shrinks itself in place while cooling, some shafts have grooved tips and are placed with a drop of clear high temp lock tight. Either way heating it will remove it.
your method usually works very well, but i have a motor which had the gear so stuck that i broke the motor (something inside now does not allow the motor to move)...it was so stuck and i've also heated up the gear so that it gets larger than the axle, but it did not work...that aliexpress 550 brushed motor made me go crazy
How to fix gear not turning with shaft of the dc motor just the motor turn and the gear not it id fit on the shaft but it spin on the shaft without the axe of the motor turning
thank you❤ i bought a motor for a project that came with a gear and i tried literally everything. this is the only solution that worked
Bro your video has saved my life and it will save it again
Casualy today found You Video it was very helpful because i have not enough tools...greetings from México Cancún!!
Thanks for watching!
Great job. 👍 If it wasn't with the help of this, I wouldn't have been able to remove the wheel from the motor without damaging It. It helped and worked for me very well. Thank.❤
No problem 👍
Ohh my finally I’ve been trying all day to take mine off thank you very much!
Thank you bro for your idea😊
One big salute for you
ikr?
mine was stuck so hard and heat and everything we searched up didn't help but this did it MOST HELPFULL RC VIDEO EVERRRRRRRRRRRRRRRR!!!!!!!!!!!!!!!!!!!
🌷👍Thank you very much. I have a motor. I need to remove that thing, and I suffered a lot. This video saved me
You are welcome
You are right
mee too!
thank you i have multiple motors with metal gears stuck on them i tried to remove for a long time but always failed i will try your tip
Thank you for sharing this I'm going to give it a try
Thanks man it worked !
Be very careful if you want to reuse the motor!!
It might happen that you break the copper wire where it is connected at the collector! (happened to me once!)
does it mess it up when you are slamming into it?
very cool. Looks like similar concept to removing metal watch band links. Thanx for sharing.
Now I've filled to gaps in knowledge that have always bothered me. Nice 1 🙂
Now I've filled to gaps in knowledge that have always bothered me. Nice 1 🙂
Where from i buy this gear ?
Obrigado pela dica, Deus abençoe sempre!
I like the simplicity of how you did it
Thanks bro for this awesome idea..😊😊
No problem 😊
congratulations! very useful.
Thank you! 😃
you are the freaking best!
MERCI BEAUCOUP 😚
Simple solution: Use a vice versus wobbling wood!
Thanks helped so much
No problem
The idea is so simple and brilliant but the demonstration lacks everywhere XD
Will this damge the motor?
Thanks bro👍👍
Welcome 👍
just heat the pinion little bit and then you can take it off easily
Is that pinion glued on to the shaft?
Is that why heat can take it off.
@@Loudes012 shaft and pinion materials have different heat transfer coefficient.
Some are applied with heat and shrinks itself in place while cooling, some shafts have grooved tips and are placed with a drop of clear high temp lock tight. Either way heating it will remove it.
Thanks bro ❤
worked great, very simple. Thanks.
Simple and effective. Thank u.
Herkes çektirme aparatı ile göstermiş. En pratik senin yaptığın. Teşekkürler. 👍
I think a rubber band around the grips would have gone a long way
Lo mismo pensé
Why didn’t I think of this that’s a great idea!
Worked! Thanks
You're welcome!
Hello Brother aapne jo Pinoin Gear nikale ho motor ke shaft se Wo Pinoin Gear kaha pe milegaa
How did you get the back piece off
your method usually works very well, but i have a motor which had the gear so stuck that i broke the motor (something inside now does not allow the motor to move)...it was so stuck and i've also heated up the gear so that it gets larger than the axle, but it did not work...that aliexpress 550 brushed motor made me go crazy
Sorry to hear that
I got mine off. where can you buy the gear wheels? I am working on a floor sweeper.
Did you find a way?
@@SivanandaSaiChilukuri NOT YET. I used a rubber band wound around the motor spindle
@@ChaZacIsa wow. thanks.
Does bro have 2 pieces of wood held together with electrical tape??
Nic yaar bro kaam kar gaya
It worked thank you
You're welcome!
But how to remove connecting shaft?
Mera 130 DC motor mey metal gear Laga hey Jo ki nikal hi NAHI raha
Thank u so much buddy🥺
No problem 👍
Nice 1 🙂
Thanks 😋
thank you bro
No problem
Amazing thanks man
No problem!
My motor's gear's hole doesn't go all the way through...
Man has that out of the groove opening music
How can get This type of steel or brass gear
Did you get it?
I just heated the geat with a torch and plyers pulled right off. Cooled with a cup of moter oil.
Parabens! muito util.
Waw great simple video
Thank you 🙂
this might work... i need gear off old motor to put on new one... the pliers used like that i never thought of..
What’s the name of the pliers?
Nice sir
Which motor is it?
Look loke a drill motor cuz I have 3 lol
And what if the pinion does not have a hole in?
is motor working after this
Thank you
It's not actually that simple
Now how do you install one?
How to fix gear not turning with shaft of the dc motor just the motor turn and the gear not it id fit on the shaft but it spin on the shaft without the axe of the motor turning
60 minutes
no sabia que se podia quitar, lo voy a probar
Thanks
Obrigado pela ideia cara
Lm v có hư moter ko ạ
không nhé Bé lùn, đây là cách gỡ đơn giản mà hiệu quả không làm hư hỏng nhông hay motor
How volt that DC motor
5 -> 12v dc )
Bang di mana jual dinamo
bánh răng có lắp lai morto được ko
có nhé ThuVõ
That’s clever
has solo con el martillo sacar clavos easy
My b in side magnet is break
Nicee
Very nice
Самая глупая идея из всех, что я видел. Можно было бы и доски поровнее найти...
굿
Sao giống của kênh sáng chế vậy anh
Wow
one minute????
Koplo. Trekker modif man
wow
Mujhe Chhaiye thaa
Ih
😂😂
video hay vl
khen đểu đấy ah :3
*but
🤣🤣🤣🤣
😊😊😊😊😊❤❤❤❤❤❤
Thanks