Detailed 2010 Impala Rack and Pinion Replacement the Easy Way.
ฝัง
- เผยแพร่เมื่อ 27 มิ.ย. 2024
- Due to a leaking seal, I had to change the rack and pinion on this 2010 Impala, I showed the easiest way to get this job done.
Power Steering Rack and Pinion Assembly Replacement for Buick Century 1997-2005 for Buick LaCrosse 2005-2009 for Buick Regal 1997 2003-2004 for Chevrolet Impala 2000-2011
amzn.to/3xt91eI
3/8" Drive Impact Socket Set, 48 Piece Standard SAE and Metric Sizes
amzn.to/4ez9v3x
DEWALT DCF903B XTREME 12V MAX* Brushless 3/8 in. Cordless Impact Wrench
amzn.to/4eBIahe
DEWALT XTREME™ 12V MAX* Brushless 1/4 in. Ratchet (Tool Only) (DCF504B)
amzn.to/3RCJMxs
DEWALT XTREME 12V MAX Cordless Ratchet Wrench, 3/8 inch, Bare Tool Only (DCF503B)
amzn.to/3VOXSyd
Olsa Tools Adjustable Pry Bar
amzn.to/3XARNXI
Flare Nut Wrench Set, Standard & Metric, 10-Piece, 1/4" to 7/8'' & 9-21mm
amzn.to/3XzrP6J
TEKTON Stubby Combination Wrench Set, 12-Piece (8-19 mm) - Holder
amzn.to/4ccp3cb
Toque Values
Steering Shaft Pinch Bolt 35ftlb
Rear Sub Frame Bolts 118ftlb
Rack and Pinion mounting bolts 66ftlbs
Tie Rod lower nut 22ftlbs plus 120 degrees. - ยานยนต์และพาหนะ
![แฉ [2/4] 11 ก.ค. 67 ‘ขวัญ อุษามณี’ เผยความจริง 16 ปีที่แล้วเกิดอะไรขึ้น? | GMM25](http://i.ytimg.com/vi/K4pXnUiObbk/mqdefault.jpg)
![[EP.01] ดูฟรึตอนแรก LOL: Last One Laughing Thailand Thailand หัวเราะทีหลังปังกว่า | Prime Thailand](http://i.ytimg.com/vi/t4KunBRKn3s/mqdefault.jpg)
Power Steering Rack and Pinion Assembly Replacement for Buick Century 1997-2005 for Buick LaCrosse 2005-2009 for Buick Regal 1997 2003-2004 for Chevrolet Impala 2000-2011
amzn.to/3xt91eI
3/8" Drive Impact Socket Set, 48 Piece Standard SAE and Metric Sizes
amzn.to/4ez9v3x
DEWALT DCF903B XTREME 12V MAX* Brushless 3/8 in. Cordless Impact Wrench
amzn.to/4eBIahe
DEWALT XTREME™ 12V MAX* Brushless 1/4 in. Ratchet (Tool Only) (DCF504B)
amzn.to/3RCJMxs
DEWALT XTREME 12V MAX Cordless Ratchet Wrench, 3/8 inch, Bare Tool Only (DCF503B)
amzn.to/3VOXSyd
Olsa Tools Adjustable Pry Bar
amzn.to/3XARNXI
Flare Nut Wrench Set, Standard & Metric, 10-Piece, 1/4" to 7/8'' & 9-21mm
amzn.to/3XzrP6J
TEKTON Stubby Combination Wrench Set, 12-Piece (8-19 mm) - Holder
amzn.to/4ccp3cb
What about replacing the rubber boot of shock absorber pls. Vlog it too
Good job. I got to do the same job on my own car to save me money. I'm kind of nervous because I never lower down the subframe before. Is it possible to reach those 2 bolts to the rack with a regular wrench
Yes you should be able to get the bolts with a regular wrench.
@@737mechanic even if you don't lower the subframe?
@@antwanthompson1869 I don't think it can be done without lowering the subframe.
@@737mechanic how did this job take you all together? And I appreciate this videos
@@antwanthompson1869 Took about 1hr and 45min but I have all the necessary tools to get it done. At the end of the video I showed everything I used. Make sure you have everything before you start.