First time my friend let me see what drifting was like was in his 240sx with about 490hp. I barely got sideways but definitely loved the feeling. He told me to rev up to 25000-3000 and dump it.. in our neighborhood around a small turn haha. Went to a few drift pads after that and really learned it's not as easy as some make it seem. But, its a lot of fun even when you're spinning out/learning haha I'm buying a 88 b2200 lx(the long bed) in a few days and probably gonna have to do the rotary swap. I'm getting excited just thinking about it
What dash is that ? I'm about finished with my 87 b2000 I did a 13b swap just don't know what dash would work with it, and I like that one you have.... great video by the way.
bump the negative dude. your the one crazy enough to 13b swap. where im at its total insanity to do so. we dont have any shops that can machine a rotary to my knowledge. keep looking good sideways man
if it was built to drift it would be great. but it is actually a stock b2200 low-rider with the wrong motor trans . and its all 80s original . springs shocks so on. well maybe 90s. its funny because im building a b2200efi for my youngest first car. he made me buy lowered springs and we are going to ford probe turbo the thing (same motor) and coilover it and IRS were thinking 93 rx7 rear end with cantilever coilovers horizontal yeeeeehaw. all i need now is cash lol. i know the best fabricator.
People saying. He's so bad he's on stock suspension and shit with a 13b in a truck I say he's good enough probably better than 95%of us he's way better than me for sure
and stock was right it was 30 year old Gabriel shocks . now it has lowerd springs and billstien shocks and is a new ride its amazing did it Nov of 2020
@@codypoynton938 right on you noticed the issue . i have kept this truck a truck so you cant say its some crazy custom race car ,lol, no dude you got beat by a truck . makes me happy . look at the stud muffen vid in my likes my son posted up riding in melissa
Im 15 dont have a liscence, do it on private tracks but tbh i think i can drift better than that i usually only spin out on attempted not reversed, reversed entry
Zane Abroutsy You are probably correct you and my son would get along good together but it’s a lot harder to drive that truck that it appears it’s easy to drift my sons drift car compared to this truck
it takes time to be great, remember it looks easy from a desk, get out there and do it for yourself and you'll be humbled.......
It’s not that hard
First time my friend let me see what drifting was like was in his 240sx with about 490hp. I barely got sideways but definitely loved the feeling. He told me to rev up to 25000-3000 and dump it.. in our neighborhood around a small turn haha. Went to a few drift pads after that and really learned it's not as easy as some make it seem. But, its a lot of fun even when you're spinning out/learning haha I'm buying a 88 b2200 lx(the long bed) in a few days and probably gonna have to do the rotary swap. I'm getting excited just thinking about it
"I'm going to go reasonably slow" well you did.. 🤣🤣🤣🤣 can't keep it on the track
and we had fun without you
You definitely needed more ballast weight on the rear end, its spinning more than its gripping to a point to be drifting.
Dylan Gouchey what I’m thinking. Vinicius has the same idea for his drift truck. Check him out
Dylan Gouchey Not Vinicius. I’m meant gingium
Such a sick build
Awesome! I need a 13b swap in my b2200
What dash is that ? I'm about finished with my 87 b2000 I did a 13b swap just don't know what dash would work with it, and I like that one you have.... great video by the way.
Quick little truck, nice job. Need a bit more momentum, tough with such a light vehicle.
Not bad for amateur rotaz are hard to keep on power band a lot of clutch work needed I had an r31 rb30et a lot of power but power band sucked hahaha
Looks like you guys had fun
Welded rear end?
What steering changes have you done now? I’m about to attempt this with a b2200
bump the negative dude. your the one crazy enough to 13b swap. where im at its total insanity to do so. we dont have any shops that can machine a rotary to my knowledge. keep looking good sideways man
damn this looks fun, ive got a b2000 im working on this gets me excited for the future
right on . fyi. b2000 b2200 is same basic trans. and diff. as a na13b. b2600 b2600i. is tii. trans and diff.
How hard was the swap? Been thinking about swapping a 13b in a Mazda
easy need to fab a new front support and motor mounts
I have a mighty max i want to take to track days so bad
2nd run was pretty good!
if it was built to drift it would be great. but it is actually a stock b2200 low-rider with the wrong motor trans . and its all 80s original . springs shocks so on. well maybe 90s.
its funny because im building a b2200efi for my youngest first car. he made me buy lowered springs and we are going to ford probe turbo the thing (same motor) and coilover it and IRS were thinking 93 rx7 rear end with cantilever coilovers horizontal yeeeeehaw. all i need now is cash lol. i know the best fabricator.
Anyone turbod a stock engine fuel Injected b2200? Would it be worth it?
0:54 Forrest Wang woo!
like the vid bro and also luv that you got a drift truck, dope that your teacher hopped in with you
Old video I know but in going into a s10 13b swap ... Cant waitt
oh and by the way its not as easy as it looks
keep making more vids
If you think about it thease fords/mazdas are a really universal platform you can do basically anything to them
yep lots of options kia and honda parts too japan has different supply so diff s and alternators come across a variety of cars . and so on
Hims drive like an old Vegas taxi driver.
missingremote you spell like a 3 year old.
Only if you worked for Nellis Cab or Desert Cab!😂🤣😃
spin out on 1st corner. . . pro
What hub did you use for the steering wheel
rx7 miata i belive
Google it bitch!
But yes, rx,7, Miata, and b2200 use the same hub. LoL
Kind of been tossing around the idea of a 3 rotor 84 Chevy long bed for this exact reason. That's pure badassery
Well then. Okay.
Stock angle?
Yes missing turn stops
Description should read, hipster teacher trys to impress work colleague but cant steer for shit.
Where’s your video?Can you do better?
guy needs to learn how to drive way to much motor for him
People saying. He's so bad he's on stock suspension and shit with a 13b in a truck I say he's good enough probably better than 95%of us he's way better than me for sure
and stock was right it was 30 year old Gabriel shocks . now it has lowerd springs and billstien shocks and is a new ride its amazing did it Nov of 2020
@@chrimpatty nice man and thank you for the replie
@@codypoynton938 right on you noticed the issue . i have kept this truck a truck so you cant say its some crazy custom race car ,lol, no dude you got beat by a truck . makes me happy . look at the stud muffen vid in my likes my son posted up riding in melissa
Im 15 dont have a liscence, do it on private tracks but tbh i think i can drift better than that i usually only spin out on attempted not reversed, reversed entry
Zane Abroutsy You are probably correct you and my son would get along good together but it’s a lot harder to drive that truck that it appears it’s easy to drift my sons drift car compared to this truck
ameture
+Phill Rio glad you can judge . now go have your own fun . not
First learn to spell and do you even have a drift car? Let alone a car?😂
Someone can’t drive 😬
wow smh
learn 1st
Dudes horrible u could tell she had no confidence in his skills
Soooo bad