Love how the airport tower turned out. It has that little sanctified shape going on there. It's looking good it's coming along well very well. Can't wait to see that train for your underground Subway
Very nice! Two suggestions: I’d put the airport sign above the entrance (so it’s centered). And for the control tower I’d add a layer of plates + hinge plates under the roof, so the angled parts will stay put,
@@mikewebb9484 He could remove the 1x2 tile in front of the play feature and have the same sort of bowed tiles that he used now but 1x2 instead of 2x2. You could put it to the sides. instead of to the back.
I put the sign in the left for some kind of balance but the hinge plates won't work due to the imperfect geometry of the build. You could only attach to the side already fixed!
Wonderful built 🛫 What about: - a 3D airport code like NBT for Brick Nottingham International on the roof? - a facade (in the facade) of a bathroom near the luggage turntable indicating a ladies or gents entrance?
I think BNT would be a good code for Brick NoTtingham, (in RL it's used on new guinea, but that airport is ridiculously small and uses a dirt and grass tarmac, so there's no risk really that people will know of it be confused)
@@RobinHoodBricks I did a little exploring on the interwebs and found out that Robin Hood Airport is not in Nottingham but in Doncaster :( But you could name your airport after WW1 flying ace Albert Ball as a nod to your city history. I suggest that because my local airport is named after a WW2 bomber pilot.
Goodday Robin. Amazing job! Did you try and place the tail section of the plane on the other side of this wonderful airport. it may give an added sweet addition and give more depth. Thank you for posting.
I'm always perplexed when people talk about seeing ads. I mainly use the app on my phone so guess they're harvesting my data in different ways. I assumed people only saw ads when not logged in on computer, but is that not the case? (should probably donate some money to the channel in another way now I think of it...)
@@andhei only use my phone. Normally i see ads on any channel with over 1000 subs and 4000 watch hours(a channel that is monetized) but not this channel.
You've really outdone yourself this time Robin! For one of your amendments for the airport you could have a fuel take leaking some oil. Can't wait to see how the haunted subway station looks!
Hey Robin! here is 2 suggestions! you could add a grated path on the roof like a maintenance path which gives you room for some funny scenes. and the other suggestion was you should make the column of the tower thicker by putting the 1x2x5 bricks in between the curved panels. this would probably make the tower look less awkward. let me know what you think! Great video!
I think that either the 2014s police station or the 2013s fire brigade has a sticker with a very useful sticker for exactly that use Edit: ok I looked it up it's on the sticker sheet from set 60004, which is the 2013s fire brigade
If you use the hinge plates you could connect the loose sides in place, you could also use a jumper plate in the middle, and the pieces would be held in place
31:23 If you use the hinges that are only one plate thick, they are 'stiff' and wont swing nearly as easily. You can either use one each at the top and bottom and build up the extra with plates, or you could use three stacked together, but that would end up being an awful lot of those plate hinges . . .
If you have a red elastic band that's big enough you can simply clamp all sides of the control tower in place by having it run through one of the slits in the ladder pieces, it should go well with the red stripes too :)
For the control tower roof, can you use hinged plate pieces or just have a well-placed stud to secure the flapping bits to the top part of the roof? Or maybe a rubber band or string (could be lego rubber bands or strings for purity)
You could use round 2x2's under the vents to make them stand out. Another idea is using 2x4 bricks under the windows of the control tower to give the guys my room.
Try using grey hinge plates to help with the flappy corners. Place the hinge plates on the top of the windows then use tiles over them to keep the studless area to go under your roof.
Well I can use them to attach to the same side they are already attached to but the geometry won't reach to the next set to hold them in place. It might make it more stiff though!
Fantastic job Robin!! Best facade yet!! One little suggestion... Put four more inverted round tiles on the bottom of the tower to just hold the flapping sections in place.
You could use some inspiration for the Monorail dilemma from the Danish metro system: Its last stop ends in the Airport itself, having a wonderful station in it.
Two tips : firstly try holding the airport tower together with a piece of string. Secondly try swapping the eight long piece of monorail track for a curve and have a wiggle in it so that it goes over the train track and doesn’t interfere with whatever you are planning to put on the baseplate next to it. 🚝🛬🛫
This is one of nicest Airport mocs I have ever seen. Great job. On your next pass thru modifying this, you might want to consider powering your two conveyors, the radar dish and the main rotating door. That would be pretty cool!
Just great what else could I say, it looks perfect where it is, you have planned very well and this is easily one of the best cities out there specially based on size of space you have to work with.. well done looking forward to the start of the subway 😀👍🏻
The air port looks amazing! You know what you should do, you should take off the arrows off of the play features and put on of the vent sticker piece on it so that way the play feature blends in with the rest of the building. So that way it just looks like a raised vent and a air conditioning unit that’s spinning, when you turn it.
Nice! If you switch out the hinge bricks for hinge plates on your control tower, there is a bit more friction. That way the windows will not flip open unwanted.
It would be cool if you had a mini build of a plane hanging in the airport I was once in a airport and a F4U American ww2 fighter was hung up but since u live in the UK you could make a mini hurricane or spitfire
I love this airport! I love that it’s a facade as well! Airports can take up so much room, but you’ve represented the most important parts very well! And with the saved space we’ve got much more to enjoy! I do have one suggestion for the next part. When you do the hotel it should include a parking deck. Maybe make that a facade as well.
Airport is looking great! 👍 though I do think the roof would look a lot better overhanging two studs more. would help with the proportion and also give the minifigures a bit of a shelter to stand underneath in the rain .
What a ride this is. I love that control tower, looks astonishing and very real. I'm quite sure there is a way to avoid the hinged pieces from flapping around but I cannot come up with a suggestion to do that myself. I'm pretty sure some other fellow onlooker will provide that though!
Excellent job Robin. And seeing it now in context in the city. - you did the right approach in terms of the "fascade" look but it still seems like it could be a much larger building. Love the built up control tower design. I'm hopeful that you can extend the tram/monorail over to the airport as I feel like that'd honor the old Airport Shuttle set too - the one I loved but never got as a kid. :)
Might jumper plates be able to be used on the control tower to hold the flaps in place? They seem to line up with holes on the bottom of the roof rather well
Ooh that would give away too much of my future plans. A tour of the city so far will be the first video of November or go back about 15 for the last one!
Hey Robin, looks good! Maybe if you have people walking through the jetway you should add a line of people waiting up the stairs to get on. You could even add a gate agent scanning the boarding passes next to the gate.
Awesome video! I do think it would be cool if you could add a sign that indicates that gate 2 is that was and gate 3 and 4 is that way. Even though those don’t exist it makes the airport look bigger
This looks, truly incredible. Roof and all. Love the control tower, which looks incredible. Everything about this is just wow. I don’t know what to suggest lol. Maybe add some air conditioning units to the top of the roof? And some CCTV cameras?
Most excellent sir Robin. First it is brilliant how you respond to every message. That's why all love your work. The monorail going to the roof would be an excellent idea indeed. How about a limousine in the dive way for a bit more detail and contrast. Seeing your John McClain was priceless. You should have some baddies near by to be defeated. Keep up the work you dead set legend
suggestion, this might look good. If you stick the ridged 2x2 round bricks under the fan tiles, they might look more like HVAC systems, and would help the play feature knobs blend in better
Great job. I have some track ideas first is the second train going to be permanently on a second platform/siding. If so you might want to connect the side ing white two junctions so you can run the new train. Also the monorail could go underground to meet the train platform of the second station or it could be near the airport hotel you mentioned would be near the airport.
Oh no the police found me ....RUN .. I totally spit out my tea 🍵. Love the airport as a facade as to not take up a whole room. So excited for the next episode... The haunting of 🧱 nottingham!
Hello Robin. I'll say it again the airport is amazing. The roof with the tower is great. And Bruce Willis visited his friend with the mug to talk about the good times. :-). An idea of mine would be to make the tram station next to the tracks and nearby to make a larger bus station for city buses and buses that go to other cities suburbs. Nice video.
I love it, i like that you make it look like it goes past the walls, you do a great job at that. Have you ever thought of putting a city back drop on that wall.
Hi Robin, Wow, it really came together nicely! Love the fact you got a real 3d tower done, nice use of the hinge pieces. You dont think the checkered red-white stickers will look better if they’re halfway down? So, if you swap the upper panels for the lower ones?
Robin I love what you have done, just an idea. Why don’t you add your second subway station to connect to your airport . ( Brick Nottingham Airport Parkway)?
Control Tower looks epic. Not sure how easy it would be, but inverted slopes under it, to mirror the top might make the shape more appealing - but of course would make it a little taller
Love how the airport tower turned out. It has that little sanctified shape going on there. It's looking good it's coming along well very well. Can't wait to see that train for your underground Subway
I think you will be just as pleased with that as well!
Imagine they made this a set
It would be awesome!
I would buy it (I probably wouldn’t afford it though)
The airport is coming along well
Of course it is :)
Of course it is (2)!
Of course it is (3)
Very nice!
Two suggestions:
I’d put the airport sign above the entrance (so it’s centered).
And for the control tower I’d add a layer of plates + hinge plates under the roof, so the angled parts will stay put,
hey i just posted that today
lmao
He can’t put the airport sign in the middle. The play feature is there. Robin maybe put a second sign to the right hand side to balance it.
@@mikewebb9484 He could remove the 1x2 tile in front of the play feature and have the same sort of bowed tiles that he used now but 1x2 instead of 2x2. You could put it to the sides. instead of to the back.
I put the sign in the left for some kind of balance but the hinge plates won't work due to the imperfect geometry of the build. You could only attach to the side already fixed!
You should add Kevin McCallister form home alone because he always gets lost in airports.
Haha, another film reference!
he doesn't even make it to the airport in the first movie
i know it's pretty off topic but does anybody know a good website to watch newly released series online ?
@Gael Angelo lately I have been using Flixzone. You can find it by googling =)
@Lochlan Ira yea, been using flixzone for since march myself =)
Wow this is really cool airport
Thanks very much!
Maybe you can add the airport sign on the right side facing right so ppl on the right side can see
Maybe even on the fence. That's next!
Wonderful built 🛫
What about:
- a 3D airport code like NBT for Brick Nottingham International on the roof?
- a facade (in the facade) of a bathroom near the luggage turntable indicating a ladies or gents entrance?
I think that sounds good
I think BNT would be a good code for Brick NoTtingham, (in RL it's used on new guinea, but that airport is ridiculously small and uses a dirt and grass tarmac, so there's no risk really that people will know of it be confused)
A three letter code sounds great!
Then there's only one option. RHB!!!!!!
i think some palm trees out the front would look really nice
I have some... but in Nottingham? I'm not sure!
If the building continues, maybe add another option to get to the back after security?
Yeah, it's so crammed in there. I'll try!
This airport should be a real set!
It looks so good and it has no back! Robin hood bricks please put this on lego ideas
Thank you. I'm not sure it is original enough for LEGO Ideas!
@@RobinHoodBricks ah yes i see
It turned out wonderfully well! And your viewers comments really did help with the illusion of the airport continuing into the distance. I love it!
Yes, I agree. Thanks, Brenda!
@@RobinHoodBricks I did a little exploring on the interwebs and found out that Robin Hood Airport is not in Nottingham but in Doncaster :( But you could name your airport after WW1 flying ace Albert Ball as a nod to your city history. I suggest that because my local airport is named after a WW2 bomber pilot.
@@melemstye They are little thieves. Our airport is Nottingham East Midlands. Catchy name!
For the control tower roof, switch which sides of the octagon have tiles and which have 1x4s. that way when the roof is on it'll lightly lock in!
I'm not sure it would work since the octagon isn't regular
@@giorgioelgar2272 oh! I totally forgot!
The geometry won't allow that I'm afraid. Good shout though!
woo hoooo!
another great 40 minutes of my life!!
Yeah, they just seen to keep coming out this length. I'm not aiming for any particular timescale.
I like it though. It's like a TV programme!
Goodday Robin. Amazing job! Did you try and place the tail section of the plane on the other side of this wonderful airport. it may give an added sweet addition and give more depth. Thank you for posting.
No problem. I didn't buy the tail bit. Oops!
That Tower is fantastic! Makes me want to build an airport, and I don't even have any Lego planes. Awesome work, Robin.
Haha, high praise indeed!
have you thought about doing traffic lights for the city
I have a few non lit ones. If you mean lit ones, then no, haha!
You can hide some lego mindstorms parts around and they have converters from the ev3 cords to power functions parts
Hey again. I dont think i ever noticed advertising in ur videos.. And cram away. We love good content. Beautiful build so far...
You absolute Legend Will! I never comment lol but I always see you here when I’m early!
@@Gryle9 u should always comment. Just dont ever say "first"... That is always annoying... But it sounds like ur just as much a legend.
I'm always perplexed when people talk about seeing ads. I mainly use the app on my phone so guess they're harvesting my data in different ways. I assumed people only saw ads when not logged in on computer, but is that not the case? (should probably donate some money to the channel in another way now I think of it...)
@@andhei only use my phone. Normally i see ads on any channel with over 1000 subs and 4000 watch hours(a channel that is monetized) but not this channel.
I will try to advertise myself more. I feel awkward doing it, as I don't like bugging people each video!
Airport turned out to be pretty nice
Thanks a lot!
You've really outdone yourself this time Robin! For one of your amendments for the airport you could have a fuel take leaking some oil. Can't wait to see how the haunted subway station looks!
Me either. Should be cool!
Hey Robin! here is 2 suggestions! you could add a grated path on the roof like a maintenance path which gives you room for some funny scenes. and the other suggestion was you should make the column of the tower thicker by putting the 1x2x5 bricks in between the curved panels. this would probably make the tower look less awkward. let me know what you think! Great video!
by the way, i'm subscribed to you on 3 different devices XD
would mess up the sticker pieces on top though...
The walkway could work but the wider tower isn't necessary and would mess with the sticker band!
Love the airport, I would however add a phone or radio so the control tower can contact the pilots to give them permission to take off
Hmmm, yes they'd have that wouldn't they!
I think that either the 2014s police station or the 2013s fire brigade has a sticker with a very useful sticker for exactly that use
Edit: ok I looked it up it's on the sticker sheet from set 60004, which is the 2013s fire brigade
@@lunarlapras93 Yeah, I've got a few similar to that!
I think if you make the monorail go to the airport, put the station on top of the roof.
Also looking forward to Subway Station 2!
I'll have it go nearby. On the roof will block our view of everything and stop the roof lifting off!
you build a very nice Airport. It looks very good👍👍👌😀
Thank you very much indeed!
Try add a mini figure on top of the e-octain just about to fall off with a scared face like they was on the e-octain whilst it was moving up
Haha!
You should add pot lights right below the roof so minifigs could see ! Coming along greatly!
Thanks, Juliet!
Wow! Your so creative, such a small airport but it’s so packed, well done
Packed and stacked. That's how we like it!
Fantastic love the tower so good looking forward to 2 more videos
Yay thanks, Kelley!
Only one thing to say Robin. WOW!
Thanks, it's appreciated!
If you use the hinge plates you could connect the loose sides in place, you could also use a jumper plate in the middle, and the pieces would be held in place
Neither of these ideas work as the geometry is off on those pieces attached by the hinges!
Sorry to here that I was hoping it would help
Looking great, love the progress!
Much appreciated!
Probably the best control tower I’ve seen!
Hey, thanks!
faracardi.... like it lol .... loving the airport
Glad to hear it!
You can use rubber bands, lego official of course, around the grill pieces to hold the air traffic control tower close
Haha, I think they'll stay in place unless we have an earthquake!
Robin mate, the old bill are on your case for lego addiction! Love your vids
Run!
31:23 If you use the hinges that are only one plate thick, they are 'stiff' and wont swing nearly as easily. You can either use one each at the top and bottom and build up the extra with plates, or you could use three stacked together, but that would end up being an awful lot of those plate hinges . . .
Yeah, might get pricey!
Would you consider putting the control tower chairs on a round 6x6 turntable so they can spin to any screen? 🤣
Haha, very efficient!
The airport is amazing!!! Just remember to put someone waving back at the child in the jetway whenever that video comes
I've written it down, thanks!
If you want to secure those windows on the tower, how about some hinged plates, then a layer of tiles and plates on top of that?
The geometry only works on the side firmly attached already. It's not completely symmetrical!
If you have a red elastic band that's big enough you can simply clamp all sides of the control tower in place by having it run through one of the slits in the ladder pieces, it should go well with the red stripes too :)
I'm not sure it's needed but if it becomes necessary I could do that!
For the control tower roof, can you use hinged plate pieces or just have a well-placed stud to secure the flapping bits to the top part of the roof? Or maybe a rubber band or string (could be lego rubber bands or strings for purity)
No room for a stud, hinges won't reach due to the geometry, no need for a rubber band. They're fine in situ!
Add a terrifying horse statue out front, like the one at Denver International Airport. That could even be something for a Halloween build.
I'd not heard of that. It looks terrifying!
If you get he monorail switch piece, If possible maybe have it come down near the hospital and then the other track to the airport!
Indeed. I don't think in front of the station building or it will block a whole row of future buildings opposite!
You could use round 2x2's under the vents to make them stand out. Another idea is using 2x4 bricks under the windows of the control tower to give the guys my room.
I write like the tower cramped and squat looking!
looks amazing so far, some great details 👍
U watch quick
Thanks!
Try using grey hinge plates to help with the flappy corners.
Place the hinge plates on the top of the windows then use tiles over them to keep the studless area to go under your roof.
Well I can use them to attach to the same side they are already attached to but the geometry won't reach to the next set to hold them in place. It might make it more stiff though!
@@RobinHoodBricks that's pretty much what I was driving at. Several hinges on the same axis stiffen the build.
Gotcha!
Fantastic job Robin!! Best facade yet!!
One little suggestion... Put four more inverted round tiles on the bottom of the tower to just hold the flapping sections in place.
The geometry doesn't work. They won't connect!
to make the windows stop flapping use the 1x4 side swing pieces and connect them to the top .
The geometry doesn't work as they are slightly nearer one side!
@@RobinHoodBricks oh i get it now
Love the Die Hard reference!
Haha, he's fun isn't he!
That control tower design is vey cool
Thanks, I like it!
You could use some inspiration for the Monorail dilemma from the Danish metro system: Its last stop ends in the Airport itself, having a wonderful station in it.
I'm sure we'll get it there but I was just going to have a standard elevated stop so it doesn't block everything else around there!
You should remove the 1x2 tile in front of the revolving door knob and put the airport sign there so that it’s center aligned.
I thought the left needed something!
Two tips : firstly try holding the airport tower together with a piece of string. Secondly try swapping the eight long piece of monorail track for a curve and have a wiggle in it so that it goes over the train track and doesn’t interfere with whatever you are planning to put on the baseplate next to it. 🚝🛬🛫
Monorail track isn't very wiggly, sadly. I'll try my best!
This is one of nicest Airport mocs I have ever seen. Great job. On your next pass thru modifying this, you might want to consider powering your two conveyors, the radar dish and the main rotating door. That would be pretty cool!
It would but there would be so many belts and pulleys it might look less like an airport!
This is SO amazing! You should build the hotel by or on where your demolition stuff is
I thought a deep facade on the other side. I have plans for that bigger space. Big plans!
@@RobinHoodBricks oh, ok I’m exited!
Just great what else could I say, it looks perfect where it is, you have planned very well and this is easily one of the best cities out there specially based on size of space you have to work with.. well done looking forward to the start of the subway 😀👍🏻
Awww thanks so much for the lovely comment. It means a lot!
Looks absolutely amazing, Rob 👌 Well done 👍 Look forward to everything to come 😊
Thanks for the support!
The air port looks amazing! You know what you should do, you should take off the arrows off of the play features and put on of the vent sticker piece on it so that way the play feature blends in with the rest of the building. So that way it just looks like a raised vent and a air conditioning unit that’s spinning, when you turn it.
I understand but I like them noticeable so Mrs Hood knows she can turn them!
Try using 1x2 Jumper plates to secure the windows on the tower that fold out. should help to get a connection on underside of roof
The geometry doesn't work at a 45 degree angle. It's fine though. They don't spontaneously open!
@@RobinHoodBricks👌
Airport is stating to look good can not wait until it’s in your city and having fights in and out good job looks good.
It's in the city at the end!
would say add some potted plants inside the main area, and some of the aircargo packages in the baggage carts or one cart of air cargo alone..
I have an air cargo buggy thing!
The guy checking the x ray at the luggage reminds me of Bernie, from the 80's movie Weekend at Bernie's hahaha...
I remember he was dead and wired up like a puppet. Is that right?!
@@RobinHoodBricks Yep.. that's the one!
Nice! If you switch out the hinge bricks for hinge plates on your control tower, there is a bit more friction. That way the windows will not flip open unwanted.
Hmm. I may even have them. I'll take a look!
Fantastic control tower! Loving the airport! Really excited for the haunted subway starting next week!
I was not expecting BRUE WILLIE! fantastic!
The man himself, haha!
It would be cool if you had a mini build of a plane hanging in the airport I was once in a airport and a F4U American ww2 fighter was hung up but since u live in the UK you could make a mini hurricane or spitfire
If love that but it's a bit too compact for that!
Thanks for adding some of my ideas Robin!
Any time!
I love this airport! I love that it’s a facade as well! Airports can take up so much room, but you’ve represented the most important parts very well! And with the saved space we’ve got much more to enjoy! I do have one suggestion for the next part. When you do the hotel it should include a parking deck. Maybe make that a facade as well.
Yes, that's the plan. Get all the fun exciting bits covered and then all the repetition and runways can be the other side of the wall!
Airport is looking great! 👍 though I do think the roof would look a lot better overhanging two studs more. would help with the proportion and also give the minifigures a bit of a shelter to stand underneath in the rain .
Just two studs will make all the difference? I quite like the small number of big pieces used on the top. It looks neat and tidy!
What a ride this is. I love that control tower, looks astonishing and very real. I'm quite sure there is a way to avoid the hinged pieces from flapping around but I cannot come up with a suggestion to do that myself. I'm pretty sure some other fellow onlooker will provide that though!
They don't flap when in place so that's something. Thanks so much!
I'm not sure about the train track points that close to the airport the train could smash into the planes wing.
We need things this close to make the most of the available space even if it is a bit unrealistic!
I love this airport
Hey thanks!
Junction piece that's cool then it can go 2 ways
Yup!
You could turn the control tower such that the telescopes overlook the airfield.
They do. The airfield is through the wall which is where they are pointing!
If you have the other part of the airplane you could attach that on the wall like a airplane plain who is leaving or landing ✈️
I only have these bits but a whole page will be attached to the wall taking off next time!
Looking good. You can put a layer of hinges between the 4x3 roof pieces and the tile/plate layer, that will help lock it all in.
The geometry will only work on the side that's already connected well!
Excellent job Robin. And seeing it now in context in the city. - you did the right approach in terms of the "fascade" look but it still seems like it could be a much larger building. Love the built up control tower design. I'm hopeful that you can extend the tram/monorail over to the airport as I feel like that'd honor the old Airport Shuttle set too - the one I loved but never got as a kid. :)
Yes, it's kinda essential it makes it to the airport as a homage to the set that we all wanted but never had!
Might jumper plates be able to be used on the control tower to hold the flaps in place? They seem to line up with holes on the bottom of the roof rather well
Sadly not at 45 degrees. They don't flap open when in place!
Do a lego tour to let see all you own lego sets the books
i like all your videos
Ooh that would give away too much of my future plans. A tour of the city so far will be the first video of November or go back about 15 for the last one!
Hey Robin, looks good! Maybe if you have people walking through the jetway you should add a line of people waiting up the stairs to get on. You could even add a gate agent scanning the boarding passes next to the gate.
Yeah, I'll add loads of people once all the bigger bits are in place. Otherwise you knock them down just as fast!
Awesome video! I do think it would be cool if you could add a sign that indicates that gate 2 is that was and gate 3 and 4 is that way. Even though those don’t exist it makes the airport look bigger
That might be tricky depending on what stickers I can find!
This looks, truly incredible. Roof and all. Love the control tower, which looks incredible. Everything about this is just wow. I don’t know what to suggest lol. Maybe add some air conditioning units to the top of the roof? And some CCTV cameras?
If I took real Nottingham seriously is have so many cameras everywhere. We're the most watched country on earth... at the moment!
@@RobinHoodBricks that is true!
Yes.
Yup!
Most excellent sir Robin.
First it is brilliant how you respond to every message. That's why all love your work.
The monorail going to the roof would be an excellent idea indeed.
How about a limousine in the dive way for a bit more detail and contrast.
Seeing your John McClain was priceless. You should have some baddies near by to be defeated.
Keep up the work you dead set legend
Then the roof won't lift off!
I may have to have a Dead Set Legend badge made up now!
Maybe get some Lego-lights underneath the overhang. Nice AirPort Robin 👍👍
Yeah, I'll see how they look!
suggestion, this might look good. If you stick the ridged 2x2 round bricks under the fan tiles, they might look more like HVAC systems, and would help the play feature knobs blend in better
I'll take a look!
I thought that you only had space for a grass landing strip and a Cessna. Wow.
That would actually be a good idea a casual flyers airport whith a grass strip
If I'd added the runway you'd be right. I like the big jets too much!
Put the monorail station elevated above the taxi road in from of the airport entrance
That'll block our view of the plane and the interior!
Great job. I have some track ideas first is the second train going to be permanently on a second platform/siding. If so you might want to connect the side ing white two junctions so you can run the new train. Also the monorail could go underground to meet the train platform of the second station or it could be near the airport hotel you mentioned would be near the airport.
They sound very ambitious, haha!
I like the airport I can’t wait for part 5💶💷💰💸💵💴💳💎🔫🛫🛬🚏🚕🚎
Coming soon!
Oh no the police found me ....RUN .. I totally spit out my tea 🍵. Love the airport as a facade as to not take up a whole room. So excited for the next episode... The haunting of 🧱 nottingham!
Haha, glad you enjoyed it!
Hello Robin. I'll say it again the airport is amazing. The roof with the tower is great. And Bruce Willis visited his friend with the mug to talk about the good times. :-). An idea of mine would be to make the tram station next to the tracks and nearby to make a larger bus station for city buses and buses that go to other cities suburbs. Nice video.
Yes, the tram stop will be near the train tracks. I'll have a bus stop but no bus station yet. Maybe one day. I've a double decker planned though!
Excellent addition.❤️
Yay, thanks!
unless you air trafic controlers are running down to the food court every hour or so you need a tea maker in the tower
There's no door so that's the least of their worries, haha!
I love it, i like that you make it look like it goes past the walls, you do a great job at that. Have you ever thought of putting a city back drop on that wall.
Mrs Hood doesn't want her walls messing up. I'd need a ton of it as well!
Hi Robin,
Wow, it really came together nicely!
Love the fact you got a real 3d tower done, nice use of the hinge pieces.
You dont think the checkered red-white stickers will look better if they’re halfway down? So, if you swap the upper panels for the lower ones?
Well I tried that on the video... and I preferred it this way. I could lower it a bit with additional pieces!
Would you consider adding a full brick height under the windows of the tower to allow for more viewing window above the computer screens?
I could, but I think it looks kinda cool being squat and short!
Please do a tramstop to the AirPort
I'll try!
Robin I love what you have done, just an idea. Why don’t you add your second subway station to connect to your airport . ( Brick Nottingham Airport Parkway)?
He is
Well it'll be across the street. The entrance into it I can put anywhere!
Control Tower looks epic. Not sure how easy it would be, but inverted slopes under it, to mirror the top might make the shape more appealing - but of course would make it a little taller
Yes I might try that if I have the right bits!
I think you should use a circle piece to secure it more on the radar tower on the airport