Looking forward to the dyno vid. That tip's gotta bring more than 50hp. I thought for sure it would be closer to 75. Oh, and I bet you already got a buyer for LB Larry. I'm guessing that's why you're taking it, to deliver to the new owner. That truck has come a long way. You're getting these "Goats" figured out. Keep up the good work brother.
How’s the 7.3 power stroke intercooler compare in size to aa aftermarket mishimoto one? Would a 7.3 power stroke inyercooler be bigger than a mishimoto aftermarket 2nd gen intercooler? I wonder how this swap would work for a second gen?
I did the fusible link delete haven’t done the alternator wire yet temp gauge , fuel gauge and oil pressure gauge works amp gauge and speedometer and no over drive wondering if you have a good place to start looking
@@decentgarage the Speedo was wonky before I had one fusible link go bad on the way to work had to put an inline fuse and new starter solenoid to get it home and then got all the parts to delete the links and just noticed no over drive and no amp gauge and no odometer
What percent tint do you have on the rear windows on your crew cab? I’m having a hard time deciding on tint for my truck and those have the look I’m after!
@@tommoon2700 yeah just try to find a 47rh from 94-95. Or 47re from 96-97. The 47re will need a pcm to control it. You can buy it for fire punk there around 1000 bucks for the pcm. Unless u do a full manual valvebody. The 47rh will shift on its own. But u will need a switch to control lockup and over drive
Looking forward to the dyno vid. That tip's gotta bring more than 50hp. I thought for sure it would be closer to 75. Oh, and I bet you already got a buyer for LB Larry. I'm guessing that's why you're taking it, to deliver to the new owner. That truck has come a long way. You're getting these "Goats" figured out. Keep up the good work brother.
Compounds sure are nice. Yes makes the truck so much quieter in the cab. I know on a hard pull my truck will make around 65-70 psi boost.
Man, such a nice truck. Unbelievably beautiful. I'd love a truck just like that.
I freaking love that truck!!
I thought for sure that 10"muffler tip was going to be the ticket! lol Guess should have used a Banks tip just their decals add 10hp :-)
Large tips really do incredible things for these trucks 🤣
Damn. I was hoping it was a RatMan ve pump
ANY INTREST IN OLD AIR FORCE 84 4 DOOR? ? ...BUDDYS YARD BOUT TO CRUSH 1 4 DOOR AND ANOTHER 1 SITTING THR !!!
Hola amigo cómo estás saludos acá de Austin Texas Freddy Delgado nice video saludos y bendiciones
I have had the P/S intercooler in my 89 for almost 20 years.
I have a 89 as well, needs a intercooler badly
What year 7.3 intercooler is that
How’s the 7.3 power stroke intercooler compare in size to aa aftermarket mishimoto one? Would a 7.3 power stroke inyercooler be bigger than a mishimoto aftermarket 2nd gen intercooler? I wonder how this swap would work for a second gen?
They are very comparable intercoolers. If you are putting one on a second gen just stick with the second gen ic.
No rubber in the lower intercooler brackets?
Yes there is. I just didn't show that in detail. In the video I mentioned in the beginning where I do this install on another truck you can see it
@@decentgarage thanks for the reply!
Hope that plastic washer bottle won't melt being that close to the exhaust side of the turbo.
I did the fusible link delete haven’t done the alternator wire yet temp gauge , fuel gauge and oil pressure gauge works amp gauge and speedometer and no over drive wondering if you have a good place to start looking
Was any of this happening before the fusible link delete?
@@decentgarage the Speedo was wonky before I had one fusible link go bad on the way to work had to put an inline fuse and new starter solenoid to get it home and then got all the parts to delete the links and just noticed no over drive and no amp gauge and no odometer
@@Ryans1stgen so, you need to check your crank position sensor
@@decentgarage I’ll check that tomorrow thank you
🤣🤣🤣 yes!
Y not use a 2nd gen inner cooler
The next video is going to be GREAT 😭
I really hope that tip is a joke lol.
I guess home depot out of mail boxes.
Nope 😬
@decentgarage lol I mean to each their own.
What percent tint do you have on the rear windows on your crew cab? I’m having a hard time deciding on tint for my truck and those have the look I’m after!
@@JaredBowman.1 on the OG I have 5% on the rears. On Long Bed Larry I have 20% on the rears. On both I have 35% on the fronts
Man i wish i had a 5 speed in my 89, auto 3 speed no od 😔 now i need to throw a intercooler on it badly
Put a 47rh or re in it
@@bigmurph1447 I'll have to do some research, thanks for the info. I'm a newbie to Cummins.
@@tommoon2700 what truck do u have
@@bigmurph1447 89 d250 single cab 2wd, it's a generator hauler non intercooled
@@tommoon2700 yeah just try to find a 47rh from 94-95. Or 47re from 96-97. The 47re will need a pcm to control it. You can buy it for fire punk there around 1000 bucks for the pcm. Unless u do a full manual valvebody. The 47rh will shift on its own. But u will need a switch to control lockup and over drive
Make the exhaust a
Axle dump
😁
Great videos....but that exhaust tip is terrible.