YXZ1000R Winch Bumper Install and Harbor Freight Winch Install | BADLAND 3500 Winch SuperATV Bumper

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ม.ค. 2020
  • Support the Channel: / briguy503
    Buy merch: briguy503.bigcartel.com/
    Facebook Group: / 3289648034441527
    Instagram: / briguy503
    Facebook: / briguy5o3
    Music by: Dyallas theartistunion.com/dyallas
    Music by: Johan Lilja theartistunion.com/aka-dj-quads
    Outro song: "Happy Rock" from Bensound.com
    Links to the items I installed on my YXZ1000R:
    SuperATV YXZ1000R Front Bumper: www.amazon.com/gp/product/B07...
    Badland 3500 Winch: www.amazon.com/gp/product/B00...
    Autmatch Winch Cable Stop: www.amazon.com/gp/product/B07...
    Ranger 6,000lb Synthetic Winch Cable: www.amazon.com/gp/product/B07...
    In this video I show you how to install a SuperATV winch bumper on my 2019 YXZ1000R. Along with the SuperATV winch bumper I'm also showing you how to install a harbor freight winch on my Yamaha YXZ1000R. The Harbor Freight winch is a Badland 3500 UTV rated winch. The SuperATV bumper is a perfect match for the Harbor Freight winch. The Badland 3500 fits perfectly with the pre-drilled holes in the bumper. Included in the video I show you how to install the bumper winch and also wire up the Harbor Freight winch on my 2019 YXZ1000R. Hope you enjoy the video and hope it helps you out on your Harbor Freight winch install.
    Here is a list of my other 2019 Yamaha YXZ1000R videos:
    A Pair of YXZ1000R's go on a Hunt for Snow: • A Pair of YXZ1000R's g...
    Nilight LED Light Bar Install: • LED Light Bar Install ...
    Browns Camp Overtaken by Yamaha YXZ1000R: • Browns Camp Overtaken ...
    A Pair of Yamaha YXZ1000r tear up Brown's Camp: • A Pair of Yamaha YXZ10...
    YXZ1000R Oil Change: • 2019 YXZ1000R Oil Chan...
    DIY YXZ Rocker Switch Panel Rugged Radio Setup: • 2019 Yamaha YXZ1000R |...
    The Best UTV Tie Down System: • The Best UTV Tie Down ...
    UTV Takeover 2019 Coos Bay Oregon: • UTV Takeover 2019 Coos...
    Memorial Day Camping Trip at Sand Lake: • Memorial Day Camping T...
    2019 YXZ1000R Harness Install: • 2019 YXZ1000R Harness ...
    Washougal MX Park Grass Roots UTV Series: • Washougal MX Park Gras...
    Yamaha YXZ1000R Gets Some Goodies!: • Yamaha YXZ1000R Gets S...
    My New 2019 Yamaha YXZ1000R Hits the Trails at LaDee Flats: • My New 2019 Yamaha YXZ...
    Yamaha YXZ1000R First Ride: • Yamaha YXZ1000R First ...
    I Bought a 2019 Yamaha YXZ1000R SXS: • 2019 Yamaha YXZ1000R G...
    Yamaha YXZ1000R UTV SXS Test Drive: • Yamaha YXZ1000R UTV SX...
    I'm Buying a SXS! | Yamaha YXZ1000R | My First SXS Experience: • I'm Buying a SXS! | Ya...
  • ยานยนต์และพาหนะ

ความคิดเห็น • 46

  • @markpeterson6086
    @markpeterson6086 ปีที่แล้ว +2

    I'm glad to hear the Badlands 3500 is similar to the Warn winch. Thanks for the video!

  • @phm14
    @phm14 4 ปีที่แล้ว +3

    There's a flat mounting plate, with threaded bosses, on top of the frame crossmember, just ahead of the firewall. Looks like it may have originally been for a radiator bracket. Seems like the logical place for the solenoid. Mine fits perfectly, with a bolt and a zip tie. No need to disconnect battery & solenoid wiring to remove plastics, not to mention it's rigid, minimizing vibration, plus less exposure to water....always a good thing, especially with electrical components.

  • @z28roc39
    @z28roc39 4 ปีที่แล้ว +4

    Excellent job, I really like the look of the bumper. Great video!

    • @BriGuy503
      @BriGuy503  4 ปีที่แล้ว

      Thank you! I was skeptical at first, but I really like it.

  • @raptornation9891
    @raptornation9891 4 ปีที่แล้ว +3

    Awesome video!

  • @funwithguns89
    @funwithguns89 2 ปีที่แล้ว +1

    Getting ready to undertake this job on my '21 yxz ss. I'm going to go for the 5k winch, seems they're roughly the same size and mount the same. This was a great guide to get me going, thank you!

    • @BriGuy503
      @BriGuy503  2 ปีที่แล้ว

      Awesome! Good luck on the install, glad I could help. The 3500 is great but I agree, the 5000 is a better choice

  • @DUNEATV
    @DUNEATV 4 ปีที่แล้ว +3

    Great video! Well done!

    • @BriGuy503
      @BriGuy503  4 ปีที่แล้ว +2

      Thanks

    • @DUNEATV
      @DUNEATV 4 ปีที่แล้ว +1

      BriGuy503 👍

  • @FloppyChuck
    @FloppyChuck 2 ปีที่แล้ว +1

    Used this for my 2021 yxz and it works great !!!!!!

    • @BriGuy503
      @BriGuy503  2 ปีที่แล้ว

      Awesome, good to hear!

  • @Raven4122
    @Raven4122 4 ปีที่แล้ว +1

    nice video Im exhausted just watching it lol a winch is a must on these things though sooo guess i need to suck it up and get mine.. Im debating I may make my own bumper

    • @BriGuy503
      @BriGuy503  4 ปีที่แล้ว

      Yea i was going to make my own but just decided it was easier to buy one lol And they are not too expensive

  • @chrisb.master6638
    @chrisb.master6638 3 ปีที่แล้ว +1

    is the 5000 lb winch from harbor freight the same bolt pattern as the 3500?

  • @69headwound
    @69headwound 4 ปีที่แล้ว +2

    That bumper looks sweet but it looks like it covers up the headlights… must just be the angle

    • @BriGuy503
      @BriGuy503  4 ปีที่แล้ว +1

      Yea the headlights are not covered. Must be my weird angles lol

    • @69headwound
      @69headwound 4 ปีที่แล้ว +1

      @@BriGuy503 It looks so good

  • @rodneysessions7463
    @rodneysessions7463 3 ปีที่แล้ว +1

    Have you considered installing an Alba air box spacer? Have you replaced your secondary air filter yet, how challenging was it on your 19?

    • @BriGuy503
      @BriGuy503  3 ปีที่แล้ว

      I havent done that yet. I hear it isn't very fun lol

  • @69headwound
    @69headwound 4 ปีที่แล้ว +2

    What electric pressure washer is that? I was thinking about trying an electric one...

    • @BriGuy503
      @BriGuy503  4 ปีที่แล้ว +1

      Some cheap $100 one from Lowes. Works decent

  • @waynevalorpi2541
    @waynevalorpi2541 4 ปีที่แล้ว +1

    How did you do your 2nd battery install and where did you get kit

    • @BriGuy503
      @BriGuy503  4 ปีที่แล้ว

      2nd battery? I only have one.

  • @rexcure655
    @rexcure655 4 ปีที่แล้ว

    Tried out the winch yet?
    Any concerns about the winch and wiring sticking out the side of the bumper unprotected or is that just the camera angle?

    • @BriGuy503
      @BriGuy503  4 ปีที่แล้ว

      Works great so far. I have a warranty just incase. The wires are covered now with the little rubber boots it came with, just forgot about them when I filmed the video.

  • @StretchYourself
    @StretchYourself 4 ปีที่แล้ว +1

    Technical difficulties 🙄 I hate that! I just interviewed a famous Portland artist and he was out of focus most of the vid! Ugh
    nbd deal bro, your vid is really informative. When do you install a hot tub in the back?!

    • @BriGuy503
      @BriGuy503  4 ปีที่แล้ว

      Yea it was kind of a bummer. I might switch back to my other camera. Hot tub install is coming up soon! Stay tuned. lol

  • @ChrisSchieritz
    @ChrisSchieritz 4 ปีที่แล้ว +1

    I'm very impulsive with my money and I just want to buy an ATV now, they're pretty uncommon over here, I don't even know what our regulations are but for sure it would be absolutely deadly to have one for my videos!

    • @BriGuy503
      @BriGuy503  4 ปีที่แล้ว

      They're alot of fun, for sure.

    • @ChrisSchieritz
      @ChrisSchieritz 4 ปีที่แล้ว +1

      @@BriGuy503 I was on one when I was a kid but someone else was driving and I fell off and they somehow managed to run over my legs, no damage of course and it was a lot of fun and that was way back in the day, i'm from Scotland so i'd love to get one and transport it to the highlands and just shred around the landscape the with one, that would be quite an enjoyable experience! Then again i'm no ATV master so you'd know more than me if that was even wise or a possibility! .

    • @BriGuy503
      @BriGuy503  4 ปีที่แล้ว

      @@ChrisSchieritz Wow that's crazy, good thing you didnt get hurt!

  • @alexzholnero4470
    @alexzholnero4470 4 ปีที่แล้ว +2

    Where did you get your bumper?

    • @BriGuy503
      @BriGuy503  4 ปีที่แล้ว +1

      SuperATV.com

    • @alexzholnero4470
      @alexzholnero4470 4 ปีที่แล้ว +1

      i see now stupid question lol :),thank you

  • @chrisb.master6638
    @chrisb.master6638 3 ปีที่แล้ว +1

    do you know of a lift kit for 2019 yxz ss se

    • @BriGuy503
      @BriGuy503  2 ปีที่แล้ว

      Don't lift it, it will be too tippy

    • @chrisb.master6638
      @chrisb.master6638 2 ปีที่แล้ว +1

      @@BriGuy503 bottoming out to much ... Tried stiffning springs and adjusting shocks but still does it

    • @BriGuy503
      @BriGuy503  2 ปีที่แล้ว

      Ya I have the same issue. I'm probably gonna get some Weller suspension soon

    • @chrisb.master6638
      @chrisb.master6638 2 ปีที่แล้ว +1

      @@BriGuy503 got worse once I added spare tire factory carrier and spare tire and system and lights and rear box loaded ........ Is Weller plug and okay stuff or fabrication involved .... Never heard of it

    • @BriGuy503
      @BriGuy503  2 ปีที่แล้ว

      Check out weller racing. They build some good stuff. The shocks would be plug and play

  • @69headwound
    @69headwound 4 ปีที่แล้ว +2

    Stupid go pro… I took about 15 videos riding a couple weekends ago and every one of them were corrupted

    • @BriGuy503
      @BriGuy503  4 ปีที่แล้ว +1

      Yea I'm not really liking the gopro for filming other then action riding video. Probably go back to using my g7x

    • @69headwound
      @69headwound 4 ปีที่แล้ว +1

      Yeah...was a sweet snow ride with no footage

    • @BriGuy503
      @BriGuy503  4 ปีที่แล้ว

      That sucks real bad