Installed this a few months ago and can say it’s definitely worth it. It does fix the issue and has helped me be a better rider on the T7-easier to confidently slide-steer with the rear wheel to name one thing. I’ve never been disappointed with Camel ADV product, quality parts.
Installed my Brake Fix last week. Probably the most "must have" mod on the t7. Coming from offroad enduro bikes I though something was broken with my rear brake first time I rode it. This "fix" makes your rear brake feel like a rear brake on a dirtbike.
Had already planned to do this for my birthday next month, so if this video doesn't cause him to run out of stock for the foreseeable, I'll be sporting 'the fix' from the start of our Spring riding! Thanks for the great vid and recommendation....cheers Rob!
Mine is on the shelf waiting to be fitted...along with acerbis tank, camel pegs and frame protection. Unfortunately I don't have a luxury garage like you
Yeah, there is no question about it. This is a must buy. The original brake on the World Raid is just as bad. Thank you for showing how much travel it had and how much it sticks out from the bike. I will go for the larger plate I think. Great work 👏🏻🎥
@@NomadSweden Hahah. that is correct tjommi... no need for the video anymore now! Thank you 🤣🎥 Amazing how you look in slow motion. Guess you sound better in slow motion as well...
I enjoy your vids, watch a lot of them. I've been looking at the Camel brake fix, think I'm convinced now. One question: You did not use thread locker, putting it back together. Nothing goes on our bikes without thread locker, I wonder how that works out for you.
As always a great vid mate. Recommended fix from me for sure. 👍 If you crack/loosen the bolt holding the brake lever to the (silver) foot peg bracket thingy b4 doing anything else, you won't have to mess around with the "bugger" that holds on the brake light switch at all. Go thru from the left hand side of the bike to reach the brake lever bolt with some extensions. You can wheedle the brake lever out and replace with the new spring and lever while still wired to the bike.
Loving all the content. Great to see the upgrades on the bike. When season is in full swing will be good to see how you find them when out on the trails.
Looks like it does it's job quite well! How are the Michelin Trackers? Will you do a short review on those? I'm eager to pull the trigger on them but I'm not sure what to expect!
Hi Nomad! 😊 where did you order the brake lever? Also the footpegs are very interesting.. 😉 very cool stuff.. still enjoying the new content. Keep on the good work! All the best, Christoph
The bolt that is hard to remove probably has red Loctite on it. If you can apply some heat it helps the stuff let go ( with care to avoid the nearby plastic🙀). Thanks Robert👍
@@NomadSweden Thanks..it sounds just right..the standard one sounds great but weighs a ton which is why I want to change, but without being obnoxiously loud on the trails.
I have also intalled The fix, but I'm struggeling to feel happy with it. I have installed Bosley 30mm lowered pegs, and LOVE them. But it dont work well with this break pedal. It ends up to high, and to much invard. So I have to lift my foot and to sving my foot inward to get to the pedal. Thats bad in a sudden situation. The leverage arguement on this is an illution as well, because the new clip moves the attacking point back to approx where it it on the OEM pedal. It's stiffer though, and you get a much better feel, but.....$200.....well...
@@NomadSweden yep its been a weird winter in Finland too. So warm all the time 🤔 Still snow on the ground here but not a whole lot. Maybe I will take the T7 out soon too 🙂 Until that I will ride my CRF300L! 🥸
I still waiting for the foldable pedal end and maybe will take a try. Question: my NS membership has been cancelled. Am I do something wrong or or you guys finished with that effort? Tack
Hej Robert, har precis monterat the fix, när du fick justera bromslyset kollade jag mitt och det funkade inte alls 😞 hur justerade du ditt? tack på förhans 🙂 Stefan
Tjena. Jag kikade på Camels video och gjorde som han. Dvs skruvade ur skriven en bit. Då kan man rotera på brickan så fjädern spänns. Sen får man hålla den i det läget när man skriva in skruven så den håller sig där.
Great video Question trying to mount the TERRAIN COMMAND switch on the left handle bar, how do you move the OEM light/indicator switch as it locks into a hole on the OEM handlebar? Thanks
Nomad Sweden lika bra som Fifth Gear nu har ni gjort mig beroende av er såååååååå jäkla bra gillar alla era videos å Robert du e kanon på videos så underbart att följa er,hamnade på er kanal då jag gillar motorcyklar har dock en cross men ska ta mc kort å snart åka TET å njuta fortsätt med eras grymma videos Mvh Fredrik
Regarding the front brakes... I have a KTM 1290, tried a tenere 700 and was shocked how overly sensitive the front brake was. Could avtivate the abs on asphalt with my pinky finger. Good brakes, but almost too much.
Hello Nomad Biker, I watch your videos with great interest. I found the last video particularly interesting because I also ride a Tenere 700. I can't buy the brake lever for the rear brake in Germany. Can you give me the address where you ordered the brake lever. That would be great. Thanks in advance and greetings from Germany from Manfred. #manfredmotorider
I have those as well and they are very nice. Good price, a bit wider and longer than stock but not massive, and they grip like crazy. Another good buy from CamelADV. I bought the rear brake fix as well, and I would say it's a must-have upgrade for the T7, making the rear brake way easier to modulate and feel.
Odd one that ! I just checked my brake pedal travel on my standard T7 and it moves 3 cm, never even knew there was an issue. I noticed the original brake pads wore out by 10k but the replacement pads have done 10K now and are not even half worn, I think my replacement pads are EBC and they work so much better, more feel and less tendency to lock the rear wheel.
i realy wander ,how you can ride so many km with a stock seat ???? im one step before i buy t7 and the seat ,like it is,is huge thing for me... very uncomfortable man... i had xt660z with zero pain in the ass with stock seat, but at t7 is other story.. Damnn ..... i thing that only something like Cobin will do the job for me... Damn Yamaha, you make t7 with 95% enduro dna and 5% adventure..
Looks to me, there will be nothing original very soon. I have some doubts that T7 is a good bike, except for the engine, since everyone wants to upgrade something there...
You may be right. While the T7 will be good enough for most people without change, there are so many products on the market that improves this or that. And then we have all the influencers on youtube that needs something to do 😂
wear mechanic gloves when ur about to break loose a bolt like that... ive put enough deep cuts into my hand from not wearing gloves. learn from my mistakes
@@NomadSweden New Trip to Turkey this time Istanbul espesially i was there for 1 week and It was still short time 2 Weeks is needed for that beautiful city
Cory should be congratulated - it is a great fix. It is noticeably closer to the bike than the original.
Yes its closer but I actually didnt notice when riding. But I do ride toes in
@@NomadSweden its not really a problem agreed but I still have the OE plastic cover fitted, which now gets more in the way as a result. :-)
Great to see the Fix is working but I can't wait for the report on your suspension upgrades. Don't keep us in the dark! :)
I won't keep you in suspense 😂 I get a few days when weather is ok. Just want to find a rough patch to test it better on.
Installed this a few months ago and can say it’s definitely worth it. It does fix the issue and has helped me be a better rider on the T7-easier to confidently slide-steer with the rear wheel to name one thing. I’ve never been disappointed with Camel ADV product, quality parts.
As usual I was about to say. Sufficiently long and informative video, mixed with facts and some small jokes. Well done Robert.
Pump up the Yamaha! :)
Installed my Brake Fix last week. Probably the most "must have" mod on the t7. Coming from offroad enduro bikes I though something was broken with my rear brake first time I rode it. This "fix" makes your rear brake feel like a rear brake on a dirtbike.
Yes it’s a game changer 👍🏻
I hope Yamaha see this and upgrade their future production runs with all these practical improvements. Well done.
Had already planned to do this for my birthday next month, so if this video doesn't cause him to run out of stock for the foreseeable, I'll be sporting 'the fix' from the start of our Spring riding! Thanks for the great vid and recommendation....cheers Rob!
Thanks Allen!
Braking gets more precise. That's really a fix. Looking forward to your upcoming suspension video, Robert. Günter/Nürnberg
Thanks Günter
Great review! I will add this to my bike ASAP. Camel products are second to none. Love them!
Thanks :)
Great to see 😊 got my „Fix“ today and looking forward to install it.. Happy rides 🖖🏼😁
Feeling unstoppable 😊
Mine is on the shelf waiting to be fitted...along with acerbis tank, camel pegs and frame protection. Unfortunately I don't have a luxury garage like you
Nice upgrades. Yes I am insanely lucky to have this garage
Yeah, there is no question about it. This is a must buy. The original brake on the World Raid is just as bad. Thank you for showing how much travel it had and how much it sticks out from the bike. I will go for the larger plate I think. Great work 👏🏻🎥
Thanks Tjommi. With this fix, there is no stopping me now. The measures were for you, so I can remove the video now.
@@NomadSweden Hahah. that is correct tjommi... no need for the video anymore now! Thank you 🤣🎥 Amazing how you look in slow motion. Guess you sound better in slow motion as well...
I enjoy your vids, watch a lot of them. I've been looking at the Camel brake fix, think I'm convinced now.
One question: You did not use thread locker, putting it back together. Nothing goes on our bikes without thread locker, I wonder how that works out for you.
Oh i had loctite on but i kept the video short
As always a great vid mate. Recommended fix from me for sure. 👍
If you crack/loosen the bolt holding the brake lever to the (silver) foot peg bracket thingy b4 doing anything else, you won't have to mess around with the "bugger" that holds on the brake light switch at all. Go thru from the left hand side of the bike to reach the brake lever bolt with some extensions. You can wheedle the brake lever out and replace with the new spring and lever while still wired to the bike.
Thanks, great tip
Loving all the content. Great to see the upgrades on the bike. When season is in full swing will be good to see how you find them when out on the trails.
Thanks :)
Just a plain kick ass vid. Good job my Nordic ADV Brother.
Thanks 😊
Looks like it does it's job quite well! How are the Michelin Trackers? Will you do a short review on those? I'm eager to pull the trigger on them but I'm not sure what to expect!
Sure I will make a video once I have more than the few Km on them.
Hi Nomad! 😊 where did you order the brake lever? Also the footpegs are very interesting.. 😉 very cool stuff.. still enjoying the new content. Keep on the good work! All the best, Christoph
It’s all in the description. Please read it before asking 😊
@@NomadSweden thx. Yes next time i will read the description. Thank you
@@christophroither8206 now i feel bad for yelling at you 😂
@@NomadSweden no worries 😉 ♡
The bolt that is hard to remove probably has red Loctite on it. If you can apply some heat it helps the stuff let go ( with care to avoid the nearby plastic🙀). Thanks Robert👍
Hells ya great upgrade yeah Camel ADV!
What is the all in one screen you have? Not seen those before, looks great!
Check out www.prototypeteam.com
Vilken skillnad!
Ett måste på min hoj..
Tack för videon ❤
Tackar :)
Nice upgrade. Btw what boots do you have? Alpinestars Tech 7?
Thanks. Yes Tech 7 👍🏻
Allways good stuff from CAMEL ADV👍
Looks like a good piece of kit Robert..well made for sure 👍. Ps, do you have the baffle in your exhaust..? Cheers Steve
Thanks. I have the db-killer in. I dont like it loud
@@NomadSweden Thanks..it sounds just right..the standard one sounds great but weighs a ton which is why I want to change, but without being obnoxiously loud on the trails.
I have also intalled The fix, but I'm struggeling to feel happy with it. I have installed Bosley 30mm lowered pegs, and LOVE them. But it dont work well with this break pedal. It ends up to high, and to much invard. So I have to lift my foot and to sving my foot inward to get to the pedal. Thats bad in a sudden situation. The leverage arguement on this is an illution as well, because the new clip moves the attacking point back to approx where it it on the OEM pedal. It's stiffer though, and you get a much better feel, but.....$200.....well...
Indeed 3cm lowered is not working. I think he mentions that in videos and product description
Great video as always! What is your skidplate?
Thanks. The skid plate is from GPMucci
Wow the weather in Sweden looks like spring already! 😳
Yes we get the odd spring day, but then it's back to zero again. I even took day off work because it was only for one day :)
@@NomadSweden yep its been a weird winter in Finland too. So warm all the time 🤔 Still snow on the ground here but not a whole lot.
Maybe I will take the T7 out soon too 🙂 Until that I will ride my CRF300L! 🥸
@@PatchedBandit Same here in South Central Alaska.....if it keeps this up I'll be back to riding early next month instead of Mid April! Cheers!
Mate, What bash plate are you using? It looks the part, for sure. Is it a Thor?
Yes, it's Thor from GPMucci
@@NomadSweden Thanks!
I still waiting for the foldable pedal end and maybe will take a try.
Question: my NS membership has been cancelled. Am I do something wrong or or you guys finished with that effort?
Tack
Thanks Zsolt. Check the latest community post about the membership www.youtube.com/@NomadSweden/community
Hej Robert, har precis monterat the fix, när du fick justera bromslyset kollade jag mitt och det funkade inte alls 😞 hur justerade du ditt? tack på förhans 🙂 Stefan
Tjena. Jag kikade på Camels video och gjorde som han. Dvs skruvade ur skriven en bit. Då kan man rotera på brickan så fjädern spänns. Sen får man hålla den i det läget när man skriva in skruven så den håller sig där.
@@NomadSweden mycket tack 🙏
I may have to do this as well cause yamaha brakes sucks big time, recently rear brake failed on me completely. how long was the shipping from US ?
I bought it from rally-motor.nl
Camel has many european distributors
@@NomadSweden thanks
Hello, what kind of tail tidy are you using? All the best, Christoph
T7rally.com but remade at home because it broke
@@NomadSweden same here..
Yes Seymor is a metal worker so he made a stronger replica
Great video
Question trying to mount the TERRAIN COMMAND switch on the left handle bar, how do you move the OEM light/indicator switch as it locks into a hole on the OEM handlebar?
Thanks
File down the peg so you can put the control where you want. I taped the handlebar to get friction.
Robert, would you mind providing a comment regarding the Camel ADV footpegs?
They work well 😊 good grip and size. Thats about it
Really great content, thank you!
Nomad Sweden lika bra som Fifth Gear nu har ni gjort mig beroende av er såååååååå jäkla bra gillar alla era videos å Robert du e kanon på videos så underbart att följa er,hamnade på er kanal då jag gillar motorcyklar har dock en cross men ska ta mc kort å snart åka TET å njuta fortsätt med eras grymma videos Mvh Fredrik
Tacketackar :)
Thanks for the tutorial very informative, btw what helmet do you use I'm about to change and was wondering what to buy
Thanks. Klim krios pro. 1,3 kg is the big difference
Yeah, I kept messing with mine and could not get the brake switch to active properly at all. I ended up putting the OEM lever back on.
Lowered pegs?
@@NomadSweden No, stock pegs. I'm not sure what the deal is. I can't seem to get it into proper adjustment.
Yeah that is a bit strange
Svampiga känslan i bakbromsen är det enda jag inte gillar med min T7. Får kolla in denna grejen för sommarens äventyr
One thing I hate about the t7 Don't "feel" the rear brake!! It seems to work, do you recommend it??

Yes, I have more feedback and feel of the brake now. I do recommend.
On an other subject. Hello, I would like to know if you drive with a rear tire 150/70 or a 140/80? Thank you.
Hello 👋🏻 i use both. If i buy cheaper tyres i sometimes buy 140.
@@NomadSweden Thank you
@@NomadSweden Hello! Please tell me why and for what tasks MICHELIN TRACKER? Thank you!
Are you guys still alive?
I miss your new videos 😀😀
Thank you 😊 we are alive and videos will come.
Regarding the front brakes... I have a KTM 1290, tried a tenere 700 and was shocked how overly sensitive the front brake was. Could avtivate the abs on asphalt with my pinky finger. Good brakes, but almost too much.
I see! i don’t have that experience. You may have strong piano player fingers? 😊
I removed my ABS lines, and have 1 line going from the brakecilinder straight to the caliper. Big improvement👍
Oh that sounds advanced :) I have to read up on that
@@NomadSweden I will soon make a video going through all the details😉
Great job 👍🏻
Hi mate. Can you please let me know what’s that engine guard and where to get it from ? Thx
Google ”gbracing engine guard tenere 700” 👍🏻
@@NomadSweden thanks mate I will get a set looks quality. And the skid plate u have is Gpmucci Thor?
@@_julian_3210 yep 👍🏻
@@NomadSweden thanks mate
0:43 Please what is the type o lift (jack) You are using?
www.biltema.se/bil---mc/mc/verkstadsutrustning/mc-lyftar/mc-lyft-680-kg-2000021674?gbraid=0AAAAADowiYhRky9CEApPgMJ-Pyvfe5Wba&gclid=CjwKCAjwrdmhBhBBEiwA4Hx5g1YsQiZJEzHFYtslA17-2MoIatjJq1AqjhmUqHXhEjSnHUQp93b1EhoCg1oQAvD_BwE
👍👍👍
Hello Nomad Biker, I watch your videos with great interest. I found the last video particularly interesting because I also ride a Tenere 700. I can't buy the brake lever for the rear brake in Germany. Can you give me the address where you ordered the brake lever. That would be great. Thanks in advance and greetings from Germany from Manfred. #manfredmotorider
Thanks. The link to the shop is in the description
Pegs are cameladv? Advice it ?
I have those as well and they are very nice. Good price, a bit wider and longer than stock but not massive, and they grip like crazy. Another good buy from CamelADV. I bought the rear brake fix as well, and I would say it's a must-have upgrade for the T7, making the rear brake way easier to modulate and feel.
@@ApocalypseNouille yes it looks nice too thanks
What he said 👆🏻 thanks
Odd one that ! I just checked my brake pedal travel on my standard T7 and it moves 3 cm, never even knew there was an issue.
I noticed the original brake pads wore out by 10k but the replacement pads have done 10K now and are not even half worn, I think my replacement pads are EBC and they work so much better, more feel and less tendency to lock the rear wheel.
Interesting 😊 I rarely lock my wheel too. I also changed to tougher pads but then it wore my break disks down and those were much more expensive
i realy wander ,how you can ride so many km with a stock seat ????
im one step before i buy t7 and the seat ,like it is,is huge thing for me...
very uncomfortable man... i had xt660z with zero pain in the ass with stock seat, but at t7 is other story..
Damnn ..... i thing that only something like Cobin will do the job for me...
Damn Yamaha, you make t7 with 95% enduro dna and 5% adventure..
Well, the standard seat is the same for everyone, but the butts sitting on them are different :)
Looks to me, there will be nothing original very soon. I have some doubts that T7 is a good bike, except for the engine, since everyone wants to upgrade something there...
You may be right. While the T7 will be good enough for most people without change, there are so many products on the market that improves this or that. And then we have all the influencers on youtube that needs something to do 😂
from brake pump not can be calibrate????
Not sure I understand
@@NomadSweden can tune the oem brake more up???
@@panagoskakatosis5314 sure but that doesnt affect how it works. Only moves it more up
This is how to convince good cheep bike to expensive
Everyone decides themselves that they want with their bike
Funny stuff. 😃
a break fix and a hair cut. upgrade
The brake* fix? :)
Haha damn! Thanks
wear mechanic gloves when ur about to break loose a bolt like that... ive put enough deep cuts into my hand from not wearing gloves. learn from my mistakes
Haha indeed! I actually cut myself in that scene but didn't show it in the video. So yes, I will wear them next time. Thanks.
First watching
Turkey Istanbul Video !
Not sure what you mean.
@@NomadSweden New Trip to Turkey this time Istanbul espesially i was there for 1 week and It was still short time 2 Weeks is needed for that beautiful city
👍👍👍👍
👍👍👍