Why do those copper pipes need to always be coiled? Essentially, the coil is cold and the fan is what blows the cold air to certain areas...but if u just want a cold surface (similar to the idea of floor heating), would u just not circular coil and just do 'S' shape going up and down on a flat surface?
Apreciable amigo, cree usted que el diseño funcionaria mejor si se hace vacío antes de colocar el gas butano? Desde ya muchas gracias por su respuesta!!!!...
That's pretty cool (no pun intended) The only thing I'd like to point out is that you used flammable butane gas instead of R-22 or R-410A. Those refrigerants are expensive though, so I understand
try building an actual split ac with a indoor coil & outdoor coil with distance through the window to some cooling for the room, lighter gas is flammable try a actual refrigerant from a fridge can for better safety & efficiency.
The hot side doesn't appear very hot for how cold the cold side is, plus it's a smaller coil that isn't even being ventilated like the cold side is. I suspect that hot side should be melting stuff, if this was legitimately working.
recomendas colocar otro ventilador para generar un efecto embudo para que tome el aire caliente y lo pase por el lado frio? cuanto dura el gas que tiene adentro?
Hello bro I'm verryyy intrested in making this project, please make a video on how to make a powerful air pump(which is you used in this video).❤❤❤❤ Please ❤❤❤❤😊
@davidsmith3302 You are pretty chill guy david And also a smart man it makes sense. What are you saying So the thing on the video actually works. Thanks man pretty cool dude man keep it up
It is real and it works. It's exactly how your refrigerator works. Except, it will not work for long time if you don't add a fan at the condenser coil. Because after some minutes, it will be too hot.
Yes ~ the condenser coil is hot and needs a fan blowing on it to get rid of the heat = most portable air conditioning units have a flexible duct that is put out a window and the opening sealed around it to vent out the heat, split-AC units have the condenser & compressor on an outside/exterior wall and the evaporator on the inside of the room they want to cool
Khứa này thực sự tin rằng gas bật lửa có thể làm lạnh với mô hình hệ thống lạnh đơn sơ còn chả thèm có van tiết lưu hay ống mao và chưa biết được cái máy nén đó đã đủ kín khí chưa 😂😂
I think you should try filling liquid nitrogen(liquid oxygen is expensive) rather lighter gas or refridgerator coolant. Then make a video. Because in extreme hot areas butane gas may be dangerous and maynot freeze as shown in video. I think in 😂 radiator side the temperature will be -20°C and on the cooling side the temperature will be -100°C.. Both side will be damn cold.
Liquid nitrogen and oxygen are oit of question as tge standing pressures are very high. The video is a fake one, but due to the high latent heat of butane it is recorded as a potential refregerant. The standing pressure is also low.
![CAMPปลิ้น | EP.83[1/2] เปิดแคมป์หลอนต้อนรับ 2 ตัวพ่อแห่งวงการผี!](http://i.ytimg.com/vi/2uPuHYHgwiI/mqdefault.jpg)
Good project.. Real benefits in today hot climate
Why do those copper pipes need to always be coiled? Essentially, the coil is cold and the fan is what blows the cold air to certain areas...but if u just want a cold surface (similar to the idea of floor heating), would u just not circular coil and just do 'S' shape going up and down on a flat surface?
Apreciable amigo, cree usted que el diseño funcionaria mejor si se hace vacío antes de colocar el gas butano?
Desde ya muchas gracias por su respuesta!!!!...
Yeah ❤
Please tell us about compressor which you use
What if we don't use the circulating pump, and just add butane into the copper coil?
That's pretty cool (no pun intended)
The only thing I'd like to point out is that you used flammable butane gas instead of R-22 or R-410A. Those refrigerants are expensive though, so I understand
Yes, what type gas you use for this your system ?
Instead of fan can i submerge it in water(for chilling the water) for my air cooler? What is tye sealant you used?
What that compressor motor ia called? Please let me know..
This motor name - mini air pump
Onde você aprendeu a fazer isso irmão?
bravo...nice video, can you check it use thermometer?
hey would that work with r134?
Kompresör olarak ne tip motor kullanılıyor
How long will the Gas last
Is this real? Motor/ compressor even to 150 psi like mini tire inflator might work.
Highly doubt cell phone battery is powerful enough.
I wonder whether you could improvised the designed by using solar panel to powered the motor and temperature switch so it can be fully automated.
try building an actual split ac with a indoor coil & outdoor coil with distance through the window to some cooling for the room, lighter gas is flammable try a actual refrigerant from a fridge can for better safety & efficiency.
pro how to get this DC MOTOR
please give the address from where you got this air pump, I will purchase it.
The hot side doesn't appear very hot for how cold the cold side is, plus it's a smaller coil that isn't even being ventilated like the cold side is.
I suspect that hot side should be melting stuff, if this was legitimately working.
sir es mai ac wali gas daal sakte hai
سلام هر چقدر گاز مبرد سبک تر باشد قطعا کارایی سیستم بالا تر خواهد بود مثلا R600
Will the amount of gas in the pipe be lost a lot?
No
How did u made the air pump
алиэкспресс
I'm thinking of designing a new one to install on my pc...
Any suggestions...🫣🫣
Can i actually cool my whole room with a similar big setup
Isso refrigera o ambiente? um quarto por exemplo?
Yeah
recomendas colocar otro ventilador para generar un efecto embudo para que tome el aire caliente y lo pase por el lado frio? cuanto dura el gas que tiene adentro?
How long does it stay iced please😊
How long does it last and doesn't burn?, please answer
Can you put in your video where to source all the parts.
Great, and how you made the pump
From wear i get this motor in out tach
Which gas do you use
Has all details of connections for evaporator to motor suction and outlet to condenser with refrigerant details.
Hello bro I'm verryyy intrested in making this project, please make a video on how to make a powerful air pump(which is you used in this video).❤❤❤❤
Please ❤❤❤❤😊
You need a video on how to make the motor. It looks different to your other motor.
Lo felicito por su video, muy interesante y gracias por compartir sus conocimientos!!!!.... 👍👍
how long it will be long last ?
Faz um com radiador para vê se gela bem...
Trabajo en esa idea obviamente con una pompa más potente
"Extreme Powerfull" 😄
Gostei você é genial
Wow... I am really picking interest.
Hey bro i just wanna know is this completely real because i want to make this please reply
@davidsmith3302 You are pretty chill guy david And also a smart man it makes sense. What are you saying So the thing on the video actually works. Thanks man pretty cool dude man keep it up
It is real and it works. It's exactly how your refrigerator works.
Except, it will not work for long time if you don't add a fan at the condenser coil.
Because after some minutes, it will be too hot.
@davidsmith3302 so basically and conclusion is that it can be made am i right? I just need to understand and make adjustments?
Thanks bro
@davidsmith3302Thank you, your thoughts are my thoughts, exactly. 😊
Can i use aluminum radiator instead of copper pipe
Pls share Pump making method video 🙂
Kitne time tak ye gas lasting karega
Why the fan?
En el lado caliente tendría más sentido
can i cool my pc with it, sir?
Yeah
After the blast
Link to that mini powerfull air pimp please ! thank you !
If left for too long, will it explode?
❌ - it is safe
May i know where you get the pump?
Это обычный водяной насос
What is the refill gas
What is the temperature at the hot end?
Must be around 70°c
It's inbetween at 30 to 40 c
Has anyone tried it?
Because I did and the pump leaks the gas right away.
you need to pour in acetone, it boils at 55 degrees
Coper wire price Kitna hai 3mm ka brother btao😊
How much hours it's run sir.
Very good❤
why does it seem to me that it is not the evaporator that needs to be cooled, but the radiator with gas
To move such an amount of heat, stronger cooling of the gas radiator is needed.@davidsmith3302
Yes ~ the condenser coil is hot and needs a fan blowing on it to get rid of the heat = most portable air conditioning units have a flexible duct that is put out a window and the opening sealed around it to vent out the heat, split-AC units have the condenser & compressor on an outside/exterior wall and the evaporator on the inside of the room they want to cool
How you make compressor
What is the life of gas or setup
So it works better if the coils are close together? Or what about spreading them? Like on a surface?
Bro how many hours work ac tell me bro
Puede permanecer con hielo todo el tiempo?
It'll stay in this form while the power is on and the pump is running...if you stop the pump then the ice will meltdown...
Todavía no aprende que tiene que expulsar el calor. El ventilador ponlo en el lado caliente
Eso mismo pensé, creo que es falso
Very support your idea , keep it up
So acredito vendo na minha frente
Coloca mão na massa e faz um assim vc ver.
great design!!! amazing !!!!
You can maximize the refrigeration power with an other fan that refrigerates the condenser coil
Amazing piece of work ❤.
❤❤Your Hero🎉🎉
Interesting idea
where is the liquid mate ? kinda disappeared as i see ...something is fishy ...a frozen fish
2:34 esas helices de metal te volarian los dedos sabes
Why not do a full ac
Have i use lpg gas sir.❤
Super!
❤ amen.le dernier réveil.😢
please make a laptop cooler using this method
This design should work perfectly well for that purpose
The result totally depends on the pump
If its strong enough to handle this pressure it would work,if not its a failure
cukup sederhana , mantap
I want to buy your project 😁
ارجو بلاغي هل هذا حقيقه ام خدعه
make phone cooler please
Khứa này thực sự tin rằng gas bật lửa có thể làm lạnh với mô hình hệ thống lạnh đơn sơ còn chả thèm có van tiết lưu hay ống mao và chưa biết được cái máy nén đó đã đủ kín khí chưa 😂😂
👏👏👏👏👏👏👏👏👏👏👏👏👏👏❤❤
I think you should try filling liquid nitrogen(liquid oxygen is expensive) rather lighter gas or refridgerator coolant.
Then make a video.
Because in extreme hot areas butane gas may be dangerous and maynot freeze as shown in video.
I think in 😂 radiator side the temperature will be -20°C and on the cooling side the temperature will be -100°C..
Both side will be damn cold.
Liquid nitrogen and oxygen are oit of question as tge standing pressures are very high.
The video is a fake one, but due to the high latent heat of butane it is recorded as a potential refregerant. The standing pressure is also low.
Nobody will say that it is reversed video
Funciona
That’s great
السلام عليكم
لماذا لا يعمل معى
Bhai real hai na sab log bolate fek hai
Its is possible
Please provide copper pipe 🔗
better with freon gas
Что это за насос?
Si yo lo hago no enfría seguro😅
Fake video hey. . Need a proper compressor to compress butane gas and a heat dissipating fan to remove the heat and complete the cycle..😂
Ya
you can try is biger
its fake
Now connect it with a free energy machine. 😂
Fake video h 😡 logo uluu bnate ho