I'm 2 minutes in, and it occurs to me. I like these small EV projects. I'm trying to figure this out, as it seems that is the direction we are going. Start small to figure out how it works. I like it.
It's frustrating that the content I enjoy watching amounts to "viewcount poison" for the creators making it. Thanks for the vid Jake, I dig this project.
Something most people don't think about with smaller video channels is how you have to film the hobbies you'd have done otherwise for little or nothing before spending big bucks on crazier projects, especially seems that way with vehicles. The paint did look pretty good before that scar though. It feels like you might at least want bigger wheels, but maybe that's just me thinking you look like a kid that took his younger brother's bike. Can't wait to see it's final form. Also all this prep should be a nice boost for the next project of this type that you do.
I'm here for it, small EV stuff is great. For future projects where you need 5-50hp, may I suggest the AGNI/Lynch motor which is a fantastic motor that is a high torque DC brushed axial flux motor with a small size and can use cheap controllers. Here is some more information I found long ago: The Lynch motor is an unconventional design with a disc armature. It marries the advantages of a conventional, wound armature motor with the benefits of a flat (printed circuit) motor. It is similar to a pancake motor, but is more powerful than any of these technologies. The disc armature has magnets on both sides, doubling the available flux density and shortening the magnetic path. It therefore packs more power per pound and per cubic inch than any other motor technology. Of course such a revolutionary motor is not for every application - it is not as cheap as wound field motors, but for many applications it is a far superior motor. It has a previously unheard of power to weight ratio and also power to volume ratio. It is also highly efficient because of the double magnet design and associated short magnetic path. It also includes integral fan cooling. The Lynch motor is an important development which spurred other motor designers to improve their products to remain competitive, such as synchronus permanent magnet machines. As a result of the competition between manufacturers the cost of high performance motors and controllers has fallen dramatically. We hope the cost of solar cells also reduces to allow renewable transportation to develop as a viable alternative to carbon fuels. Cedric Lynch built his electric bike around a mid-drive configuration, also building one of the worlds most efficient light weight electric motors to power his rig reliably at 60-MPH for significant distances. He would later set several world records with his axial flux motor and bring it to market as the Lynch / Agni motor. Briggs and Stratton would eventually buy this technology which would lead to the Etek motor, which is now famous for making high speed efficient electric hot rods. Cedric uses to achieve high speeds is by following the rules of aerodynamics, and building a bike that is as aerodynamic and as efficient as possible. The other builders on this list bypassed this step, and Cedric uses this bicycle as daily transportation on real commutes. Although this high-efficiency motor uses “old school” brushes, this fact allows builders to use very affordable controllers. He has proven his design choices through thousands of miles of commuting, and the Lynch motor is highly respected. Cedric Lynch is known as the creator of the Agni Motor, a highly efficient electric motor that weighs around 25 pounds and can put out as much as 50hp. Cedric Lynch is a British 'mad scientist' type mechanical engineer obsessed with the idea of greener transportation. His interest has been in building a super efficient yet powerful vehicle that can serve as a car replacement. He started thinking of his own design for an electric motor in 1983 when he began entering competitions organized by the Battery Vehicle Society regarding building an efficient electric vehicle. At the time there was no reasonably priced DC motor with descent efficiency so Lynch decided to build his own utilizing modifying existing motors with old tin cans that he would spread out flat to use as cooling fins. Surprisingly using rudimentary materials and a garage work bench, Cedric was making better more efficient electric motors than any of the universities were able to manufacture in state of the art workshops. Cedric then came up with a motor design that could be cheaply manufactured and began manufacturing his own motor that he could sell to the public in 1988 and the Lynch Electric Motor Company was born, known as LEMCO. Cedric first used his motor to create a small boat called “The Spark” that would set an electric boat efficiency record. From there Cedric turned his attention to bicycles, an application generally considered too small for a lynch motor at that time. Cedric mounted his motor in recumbent bike, allowing him space to eventually use a set of thundersky lithium batteries. The resulting aerodynamic recumbent bike had a top speed of 60mph and still managed an incredible range of 150 miles. Cedric rode his recumbent creation everywhere as a daily commuter, putting an amazing 50,000 miles on the machine - technically a motorbike. Briggs and Stratton, the US firm famous for lawn mower engines, bought the technology and used it in their E-Tech Motor, and Cedric went on to manufacture his latest incarnation of his lynch design into the Agni motor, which is used in go karts, sailboats, motor boats, and even small airplanes. The Lynch designed motors all have the same traits. Brushed motors, around 25 pounds in weight and they are able to put out enormous power compared to their weight. Sometimes as high as 50 hp (depending on amperage ran through the motor) at an incredible 98% efficiency. Lynch Motors are also the most often used motors in electric motorcycle racing applications. Cedric's zero-emission motorcycle, which has a top speed of 120mph, was shown in action winning the world’s first zero carbon race - the TTxGP in the Isle of Mann. The idea for the electric motor has been snapped up by the 56-year-old’’s friend Arvind Rabadia, who together with his brother Hasmuk Rabadia had been thinking of starting a business in India. They have now set up Agni Motors to make further-improved versions of Cedric’s motors Despite Cedric’s breakthrough invention he has no formal engineering qualifications and taught himself the techniques needed to construct his engine. He first became interested in electrics when his parents bought him a book entitled How to build things from things found at home. The Etek motor is a brushed 25-pound pancake shaped motor that puts out enormous power for its weight. Depending on amperage and voltage the Etek can easily provide between 15-horsepower and 30-horsepower reliably and consistently (11-kW / 22-kW). A perfect platform for a powerful electric bike if you do not mind the weight. Although brushless motors are considered more modern, a brushed motor like the Etek allows the builder to use very affordable controllers. Cedric-Lynch invented the motor and sold it to Briggs and Stratton which US company produced the Etek at a lower price (around $600). In the late 90’s early 2000’s it was the way to go for a high-power / light-weight electric vehicle. Many small E-vehicle records were set using the Etek motor. Finally, the market had a relatively lightweight and powerful electric motor available to the masses. In essence, the Etek allowed hot rodders to build electric bikes. Before the Etek very few people had ever achieved 50mph on an electric bike. Even today, Etek motors (and newer incarnations of the Etek motor) are used to make some super fast electric bikes. In the case of Liveforphysics, the fastest E-bikes ever. Liveforphysics used a newer version of the Etek (the Agni motor), to achieve speeds of over 70mph, and dominate a recent hill-climb event. Every Etek I have ever ridden has been characterized by brutal off-the-line acceleration, usually to a point where you have to apply the throttle very carefully or get thrown off. However, it is possible to run an Etek at a lower voltage or lower amperage and have a very manageable, safe, and sane electric bike that will not burn out on you, no matter high steep the incline.
Really wish there were upgrade kits for the Rambler 12. I have mx650 but thinking about selling it and getting a burromax TT1000R as its pretty much the stats of a tricked mx650 plus it has way better brakes and shocks out of the box
For numerous lighting problems (black light -HIGH VOLTAGE INVERTER and heads up buttons not lite) on my C5 corvette, I changed out the instrument cluster and sent out to United Radio to correct the odometer reading. No problem with them at all. However, the key fobs need re-programming, and the tire pressure monitoring system won't allow me to set the values. Error code BO RFA NO COMM. is present. Key Fob training and Tire training is showing up in the DIC, but I cannot progress any farther. What is the fix?
I don't mean to be rude or anything but why not take more pride in your property? a good day worth of cleanup, some grass seed and use your mower and your home would look much nicer.
Motortech don't have a layaway plan same bike as the venom ,, through online no call them up and say you want to put money down on a bike you can start off with as little as $50 I believe but you only get one year
Agreed these razor mx500s are built like sht, I’m actually pretty disappointed in it, pretty underwhelming… I guess that’s why people replaces the entire bike till it’s not even a razor anymore 😅 I’ve got a SYX moto holeshot, a little smaller but built way better! Gonna convert it to an ebike now that I got a mx500 and just want to resell it haha
Very cool EV bike. Bring on stage 2!!
2wd
"Take that thing off any sweet jumps"! LOL Napoleon Dynamite....
I'm 2 minutes in, and it occurs to me. I like these small EV projects. I'm trying to figure this out, as it seems that is the direction we are going. Start small to figure out how it works. I like it.
That really DOES look like a serious accident looking for somewhere to happen, especially with a rider with a notoriously bad back.
You BE careful!
Don’t worry, I already crash tested it. 😂
The band of all mini bike enthusiast is the chain falling off
i, however, am here for this.. it teaches BASIC ev tech... before i loved to mess with cars, it was bikes...
Very nice! And way less sketchy at low speed than the little mini thing.
Great video! As usual!…..Napoleon Dynamite reference! Sweeet jumps!
It's frustrating that the content I enjoy watching amounts to "viewcount poison" for the creators making it. Thanks for the vid Jake, I dig this project.
Agree
Something most people don't think about with smaller video channels is how you have to film the hobbies you'd have done otherwise for little or nothing before spending big bucks on crazier projects, especially seems that way with vehicles. The paint did look pretty good before that scar though. It feels like you might at least want bigger wheels, but maybe that's just me thinking you look like a kid that took his younger brother's bike. Can't wait to see it's final form. Also all this prep should be a nice boost for the next project of this type that you do.
Enjoying the variety of videos. I like the fact that you're building stuff.
The knobby tire noise along with the electric engine whine, it kind of sounds like a TIE fighter.
I dig all the ev stuff, I'm definitely learning things for my own projects down the road.
Yeah man. These EV videos are fun. Keep ‘em coming. Don’t listen to the algorithm my dude.
I enjoy these videos, Jake.
Nice doppler effect in that drive-by!
Fun low-cost content, I love it. Side note: that's excellent time-lapse music.
I'm here for it, small EV stuff is great. For future projects where you need 5-50hp, may I suggest the AGNI/Lynch motor which is a fantastic motor that is a high torque DC brushed axial flux motor with a small size and can use cheap controllers. Here is some more information I found long ago:
The Lynch motor is an unconventional design with a disc armature. It marries the advantages of a conventional, wound armature motor with the benefits of a flat (printed circuit) motor. It is similar to a pancake motor, but is more powerful than any of these technologies. The disc armature has magnets on both sides, doubling the available flux density and shortening the magnetic path. It therefore packs more power per pound and per cubic inch than any other motor technology. Of course such a revolutionary motor is not for every application - it is not as cheap as wound field motors, but for many applications it is a far superior motor. It has a previously unheard of power to weight ratio and also power to volume ratio. It is also highly efficient because of the double magnet design and associated short magnetic path. It also includes integral fan cooling.
The Lynch motor is an important development which spurred other motor designers to improve their products to remain competitive, such as synchronus permanent magnet machines. As a result of the competition between manufacturers the cost of high performance motors and controllers has fallen dramatically. We hope the cost of solar cells also reduces to allow renewable transportation to develop as a viable alternative to carbon fuels.
Cedric Lynch built his electric bike around a mid-drive configuration, also building one of the worlds most efficient light weight electric motors to power his rig reliably at 60-MPH for significant distances. He would later set several world records with his axial flux motor and bring it to market as the Lynch / Agni motor. Briggs and Stratton would eventually buy this technology which would lead to the Etek motor, which is now famous for making high speed efficient electric hot rods.
Cedric uses to achieve high speeds is by following the rules of aerodynamics, and building a bike that is as aerodynamic and as efficient as possible. The other builders on this list bypassed this step, and Cedric uses this bicycle as daily transportation on real commutes. Although this high-efficiency motor uses “old school” brushes, this fact allows builders to use very affordable controllers. He has proven his design choices through thousands of miles of commuting, and the Lynch motor is highly respected.
Cedric Lynch is known as the creator of the Agni Motor, a highly efficient electric motor that weighs around 25 pounds and can put out as much as 50hp.
Cedric Lynch is a British 'mad scientist' type mechanical engineer obsessed with the idea of greener transportation. His interest has been in building a super efficient yet powerful vehicle that can serve as a car replacement.
He started thinking of his own design for an electric motor in 1983 when he began entering competitions organized by the Battery Vehicle Society regarding building an efficient electric vehicle. At the time there was no reasonably priced DC motor with descent efficiency so Lynch decided to build his own utilizing modifying existing motors with old tin cans that he would spread out flat to use as cooling fins. Surprisingly using rudimentary materials and a garage work bench, Cedric was making better more efficient electric motors than any of the universities were able to manufacture in state of the art workshops.
Cedric then came up with a motor design that could be cheaply manufactured and began manufacturing his own motor that he could sell to the public in 1988 and the Lynch Electric Motor Company was born, known as LEMCO.
Cedric first used his motor to create a small boat called “The Spark” that would set an electric boat efficiency record. From there Cedric turned his attention to bicycles, an application generally considered too small for a lynch motor at that time. Cedric mounted his motor in recumbent bike, allowing him space to eventually use a set of thundersky lithium batteries.
The resulting aerodynamic recumbent bike had a top speed of 60mph and still managed an incredible range of 150 miles. Cedric rode his recumbent creation everywhere as a daily commuter, putting an amazing 50,000 miles on the machine - technically a motorbike.
Briggs and Stratton, the US firm famous for lawn mower engines, bought the technology and used it in their E-Tech Motor, and Cedric went on to manufacture his latest incarnation of his lynch design into the Agni motor, which is used in go karts, sailboats, motor boats, and even small airplanes.
The Lynch designed motors all have the same traits. Brushed motors, around 25 pounds in weight and they are able to put out enormous power compared to their weight. Sometimes as high as 50 hp (depending on amperage ran through the motor) at an incredible 98% efficiency. Lynch Motors are also the most often used motors in electric motorcycle racing applications.
Cedric's zero-emission motorcycle, which has a top speed of 120mph, was shown in action winning the world’s first zero carbon race - the TTxGP in the Isle of Mann.
The idea for the electric motor has been snapped up by the 56-year-old’’s friend Arvind Rabadia, who together with his brother Hasmuk Rabadia had been thinking of starting a business in India. They have now set up Agni Motors to make further-improved versions of Cedric’s motors
Despite Cedric’s breakthrough invention he has no formal engineering qualifications and taught himself the techniques needed to construct his engine. He first became interested in electrics when his parents bought him a book entitled How to build things from things found at home.
The Etek motor is a brushed 25-pound pancake shaped motor that puts out enormous power for its weight. Depending on amperage and voltage the Etek can easily provide between 15-horsepower and 30-horsepower reliably and consistently (11-kW / 22-kW). A perfect platform for a powerful electric bike if you do not mind the weight. Although brushless motors are considered more modern, a brushed motor like the Etek allows the builder to use very affordable controllers.
Cedric-Lynch invented the motor and sold it to Briggs and Stratton which US company produced the Etek at a lower price (around $600). In the late 90’s early 2000’s it was the way to go for a high-power / light-weight electric vehicle. Many small E-vehicle records were set using the Etek motor. Finally, the market had a relatively lightweight and powerful electric motor available to the masses.
In essence, the Etek allowed hot rodders to build electric bikes. Before the Etek very few people had ever achieved 50mph on an electric bike. Even today, Etek motors (and newer incarnations of the Etek motor) are used to make some super fast electric bikes. In the case of Liveforphysics, the fastest E-bikes ever.
Liveforphysics used a newer version of the Etek (the Agni motor), to achieve speeds of over 70mph, and dominate a recent hill-climb event.
Every Etek I have ever ridden has been characterized by brutal off-the-line acceleration, usually to a point where you have to apply the throttle very carefully or get thrown off. However, it is possible to run an Etek at a lower voltage or lower amperage and have a very manageable, safe, and sane electric bike that will not burn out on you, no matter high steep the incline.
A new Jake video! Yeah!!
I haven't watched it yet. But love the content either way
Love this ev series
I really like this mini EV bike content, its cool and informative. :)
LOVE this content!!! Great video Jake!
Jake, when are you going to post some updates on the new insight?
I like all of your videos including this
Really wish there were upgrade kits for the Rambler 12. I have mx650 but thinking about selling it and getting a burromax TT1000R as its pretty much the stats of a tricked mx650 plus it has way better brakes and shocks out of the box
For numerous lighting problems (black light -HIGH VOLTAGE INVERTER and heads up buttons not lite) on my C5 corvette, I changed out the instrument cluster and sent out to United Radio to correct the odometer reading. No problem with them at all. However, the key fobs need re-programming, and the tire pressure monitoring system won't allow me to set the values. Error code BO RFA NO COMM. is present. Key Fob training and Tire training is showing up in the DIC, but I cannot progress any farther. What is the fix?
I enjoy these videos
i dig this stuff.
Sick whip doggy
How much does this bike setup weigh?
New sub cool build
Hydraulic brakes are worth it 💪
I had one of these as a kid and put many many miles on mine. My chain was not that loud. Why is yours so loud??? Is it the tensioner?
Where do you buy all this stuff
does it fit in the e46?
Get the venom 1600 watt on layaway build up that bike it's bigger
nice
I don't mean to be rude or anything but why not take more pride in your property? a good day worth of cleanup, some grass seed and use your mower and your home would look much nicer.
Was thinking the same thing and would make for good content...shop included
Motortech don't have a layaway plan same bike as the venom ,, through online no call them up and say you want to put money down on a bike you can start off with as little as $50 I believe but you only get one year
more Zappy bois!
Ahh yes, the ole glooplicolor job...
Go mushroom hunting with that bike! Tiss the season.
No credit check
Agreed these razor mx500s are built like sht, I’m actually pretty disappointed in it, pretty underwhelming… I guess that’s why people replaces the entire bike till it’s not even a razor anymore 😅 I’ve got a SYX moto holeshot, a little smaller but built way better! Gonna convert it to an ebike now that I got a mx500 and just want to resell it haha
Personally I like the EV content. I think your next buy should be a VW bug or simply swap your pickup to electric. And I laughed as I typed simply.
The dumbest thing you can do with a bad back!?! 🤦♂️
Do more EV stuff