Pinball Tech and Repair #2 : The Twilight Zone - Target Replacement
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Replaced the millions and 5 million jackpot stand-up target on my Twilight Zone pinball machine.
View on Website:
www.pinballsupe...
----------------------------------------------------------------------------------------
Website: www.PinballSupernova.com
Blog: pinballsupernov...
FaceBook: www.facebook.c...
Twitter: / pinbalsupernova
TH-cam: / @pinballsupernova
Thank YOu for that, but i would like to ask a question. My slot kickout is un predictable. Sometimes it kicks to the centre of the flipper and other times through the centre of both flippers losing the ball. Any idea why that is? thank you
Armando, make sure the weld on the VUK is not broken. I know some of the welds broke on one side of Twilight Zone. Otherwise you can try to slightly bend the VUK to the correct flipper where the ball should come out to. Not much besides those two things.
@@pinballsupernova The interesting bit is that it kicks out to random spots. Even if it were to the wrong spot and it was consistently there i would say sure. but its all over the place. I will check for that weld you refer to. Shot for the help\
Armando, I would check the weld on the VUK. The weld may be broken or soft causing flex when the ball launches out. The ball may not come out straight and bounce around after the VUK is not solid because of the weld. The welds on the VUK are known to break on Twilight Zone. Check out this link if you want to purchase a new one. Terry makes great parts and protectors.
mantispinball.com/product/twilight-zone-slot-machine-scoop/