Now, if we can find a way to fix the unbalanced contrast on Pacman, Galaga, and Rampage. LOL Thanks for the video. Glad you were able to resolve the offset issue. :)
yeah, i figured that out too. mine failed when i didn't move the joystick up at the right point either.... the screen shouldn't be square, it's much taller vertically than it is wide. so i'm not sure where you got that idea from. -------------------------------------- anyways, all the arcade glitches are there, going through a ghost, making ghosts go straight up through the board. working on the killscreen, got to a million plus on both pac versions so far, seems ok. i can't make decent video yet, but will figure out something. later -1
I searched the android based folders on the internal storage Named px7 on the ridge racer and px9 on the pac-maia . This can be done from your phone or the machine itself
I've been having fun hacking these. You can put any android apk on your phone and plug it in the USB , start the machine and it will connect to ur phone as a mass storage . These things are so hackable . Ive used a USB hub and a thumbdrive also. Even hooked up a Bluetooth controller ( 8bitpro) . Ive posted on r/1uparcade talking about the exploits ive tried so far . If you have an older machine you can use the USB micro and a pc running android debug bridge . I see later models removed the jack and only left a female usb-a . Ive seen others without USB ( removed on some newer machines ) soldering in a USB cable .
Why is there plastic over your controls? Are you trying to protect it from wear and tear because you think its going to be valuable in the future? 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
![ฮักเทื่อสุดท้าย - บอย ศิริชัย [OFFICIAL MV]](http://i.ytimg.com/vi/-1PoPoQ-B-k/mqdefault.jpg)
Thanks for this. It recentered my screen too.
Now, if we can find a way to fix the unbalanced contrast on Pacman, Galaga, and Rampage. LOL
Thanks for the video. Glad you were able to resolve the offset issue. :)
I heard the new machines are sharper, to bad I don't have any more room. Really want the star wars cab!!
I think it's just the counter-cades which are cheaper.
What's wrong with the game when you turn it on but it don't light up and you can hear it playing
The test mode must have initiated the monitor's auto-adjust which centered the screen.
Did it twice and now I'm centered. Before, "test mode" text was cut off on the left.
yeah, i figured that out too.
mine failed when i didn't move the joystick up
at the right point either....
the screen shouldn't be square, it's much
taller vertically than it is wide. so i'm not
sure where you got that idea from.
--------------------------------------
anyways, all the arcade glitches are there,
going through a ghost, making ghosts go
straight up through the board.
working on the killscreen, got to a million plus
on both pac versions so far, seems ok.
i can't make decent video yet, but will figure out something.
later
-1
My screen is also shifted to the left, however the test did not fix
Up up down down left right left right ab start
leave volume on low when on test mode, when ask for volume test go to off first and then low and high. no error on sound test.
Where did everyone find out about test mode stuff? Does 12-1 have that? I have no issues but figure in the future it would be good to know.
Other you tubers face book etc etc.
Try holding all buttons down while turning on the machine for the 12 in 1
I searched the android based folders on the internal storage Named px7 on the ridge racer and px9 on the pac-maia . This can be done from your phone or the machine itself
Wow has it been 4 yrs already?! I have Star Wars now too. ;) But yes I found all the info I needed on Interwebs Reddit etc. Still enjoying my 12-1.
I used to play pac man when I was a kid.
same
I've been having fun hacking these. You can put any android apk on your phone and plug it in the USB , start the machine and it will connect to ur phone as a mass storage . These things are so hackable . Ive used a USB hub and a thumbdrive also. Even hooked up a Bluetooth controller ( 8bitpro) . Ive posted on r/1uparcade talking about the exploits ive tried so far . If you have an older machine you can use the USB micro and a pc running android debug bridge . I see later models removed the jack and only left a female usb-a . Ive seen others without USB ( removed on some newer machines ) soldering in a USB cable .
Test mode for Rampage is P1 A B P2 A B and P3 buttons together.
For God’s sake, man!!! Take that damned A sticker off the player 1 button!!!🤣🤣🤣🤣
I just bought it
On all mine. The sound has to be in the middle. Then when sound test comes up. You turn off sound then to high.
Yeap figured that out
wait yours didn't come with an acrylic cover?
mine did
This was the first batch, but they did send me one for free,shortly after I made this video
Why is there plastic over your controls? Are you trying to protect it from wear and tear because you think its going to be valuable in the future? 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Did anyone else notice when you died the first time the board reset the pacs? Then after he died the 2nd time it went back to normal?
It was just on 2 player game. Lol
Still don't know what the difference is between Test Mode A and Test Mode B.
No idea
My test modes are in chineese so its just a guessing game .