Honest Richie Bros Wolverine Cheapest Brush Cutter Review
ฝัง
- เผยแพร่เมื่อ 4 พ.ค. 2022
- Going over pros and cons as well as comparing to Bradco GSS72.
Wolverine mower was purchased from Richie Bros auction for 1300 plus fees. so far I am very pleased with the product for the price.
Blue Diamond Blade Kit
www.bluediamondattachments.co...
Diesel Creek video where Lovejoy is replaced with chain. Great work and its helped improve the product!
• Repairing The Cheapest...
I just bought a 12 spline stump jumper and blades for a 6 foot bush hog and put them on my wolverine brush cutter. Does awesome now and haven’t had a issue
Weld some thin cutting edge in the bottom of that bar, two sided bevel and you can reverse if needed.
Happen to have one borrowed from a friend. We both have a Cat 299d3 xe. Both machines hyd fluid temperature skyrockets to a point where the alarms come on and have to stop to cool down. Any idea what's going on and how to cure it???
Thanks!
Without seeing it, it would be hard to diagnose, but running an attachment like these requires a ton of flow through the machine, way more than a grapple or clamshell. My machine has a reversing fan and in addition to that I wash the radiator out every other day of use or else it overheats the hydraulics and sometimes the coolant. Even with washing them religiously, I just pulled my radiator out to fix a leak and was amazed how dirty it was within the fins, so that might be an issue with both machines because it’s not a problem that would normally present itself through normal use, other than that, the motor in the attachment might have a blockage causing the pressure to be too high and putting strain on the machines or the gears aren’t meshing properly in the gear box causing the same issue
@Nathan Churchill could it be that crossover fitting on backwards or hose ends on wrong ends? We have hyd oil coolers on these machines for our forestry mulching heads that never see 170° in the hottest of summer. Only thing I know to try is flipping that crossover vlv and see what happens...
@@ryanderryberry8271 Ours overheats too. Could some one look to see which way the crossover fitting arrow is pointing on theirs, left or right? Thanks
Hi
I bought the same as yours
Do you happen to have A link for new blades options?
The link is in the description of the video
@@nathanchurchillthe link is not working.
I just bought same one brand new $2500
For the price you really can’t beat them, just definitely watch out for failure points
How many gallons per min is your machine and do you run it at 100% setting?
@@rockstahla7544 the 325 is only 20 GPM max I believe and depending on what we are cutting is how I place the throttle, light grass I am usually only at 25% but with thicker coyote brush usually 80%
Mine cuts both directions
WOW right off 50 hours and you have to do all that . Sounds like a big POS to me!!!
Surprisingly still working 🤞🏻
Hey there, I am mostly mowing grass, maybe a bit of finger dia, brush….what’s the preformance like in grass? I want to sell my rough cut mower and go to this….