How To Update Anycubic Kobra 2 Firmware V3.0.6. | 5X To 6X Printing Speed UP | 6X Faster
ฝัง
- เผยแพร่เมื่อ 15 มิ.ย. 2024
- 🔰Hello friends,
More details about the Anycubic Kobra 2 3D printer - www.anycubic.com/products/kob...
🔰This 3D printer is sponsored by the Zenix store.
⭕ZENIX Store LK - +94776759633 (LK)
⭕Website - store.zenix.lk/
⭕Email - store@zenix.lk (LK Sales)
🔸Links to buy the Anycubic Kobra 2 3D printer
⭕ZENIX Store LK - store.zenix.lk/3d-printers/17...
⭕Other 3D Printer in the ZENIX Store LK - store.zenix.lk/93-3d-printers
⭕Aliexpress - s.click.aliexpress.com/e/_DFM...
🔰Amazon - amzn.to/49ehorX
Time Codes
00:00 Intro
00:15 Download Firmware V3.0.6
01:51 Mainbiard Firmware Update
04:01 Screen Firmware Update
07:04 Import Configuration Files
--------
Mandatory Disclaimer:
I participate in the Aliexpress Affiliates program, which means that if you click on one of the above Aliexpress links and purchase a product on Aliexpress, I will receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
🔰If you feel my creations are valuable, engaging, and knowledgeable please don't forget to SUBSCRIBE to my channel, LIKE and COMMENT to my videos, and SHARE them with your friends.
🔰Thank You Very Much Guys, Good Luck!
#anycubic #3dprinting - วิทยาศาสตร์และเทคโนโลยี
Thank you so much for this video, I was having a lot of trouble figuring out how to update my firmware before this.
You're welcome!
what was you problems, cant calibrate leveling?
@@calleblomquist I was having trouble downloading the file and getting it onto the printer. After I updated it, turns out that my prints were messing up, particularly the bottom layer. I ended up going back to the older version. May try again later 🤷♂
Thank you for posting this. I updated my firmware and Prusa profile but unfortunately I had issues with layer shifts that I never had before so I just went back to 2.9 and the printer is back printing great. I wish I had checked on Reddit before I did the upgrade because many others are having issues. I was planning on preordering a Kobra 2 Max but decided to wait because of the buggy firmware.
I had the same problem with layer shift. I'm disappointed I can't use the faster speed 😭
For those who do not have that slot, simply remove the screen and with the plate removed, put the card in, turn it on and wait for the update, when it is finished, reassemble it and that's it. I just finished it with mine
You are a great human being!
I updated the firmware and had severe overextrusion issues. I had to reduce flow down to 70% even after recalibrating my e steps. I found what i had to do was restore the firmware to factory settings (M502 i think) reboot, update firmware, v restore to factory settings again and then the over extension was gone. This thing prints like a dream now.
I updated and it no longer prints well. how to set factory? Thank you
@@gokuyxixi I did it two ways. First in the system menu (under prepare i think) and used the reset factory settings option. I then connected to a PC running pronterface and ran M502 command then M500. After that I formatted a branded 8Gb sd card (It didn't like any cards smaller than 8Gb and it didn't like unbranded ones) and copied the firmware to it. Once the firmware updated I redid the reset to factory steps again to make 100% sure there was no extraneous data left in memory. I have found these to run a higher than expected flow rate... mine is perfect at 90%. I spent a lot of time chasing down less than perfect prints figuring this out but now it prints beautifully and very stable at 150mms.
@@EnjoymentboyI have a problem, after updating my x-axis it seems to go from one step to another and starts printing there, the test bench looks like pieces in pieces. I need help
@@daninavarro2716 When you note that you updated the x axis, do you mean you updated the firmware or the x axis motor? If firmware try clearing out the eeprom by resetting back to factory. Make a note of your z offset first though. If you replaced the motor the coils might not be paired int eh same way. Test the pins on the old and new motor with a multimeter in continuity mode and see how they are paired up: ie side by side or crossed
@@Enjoymentboy What I updated was the firmware, thanks for responding
my Kobra 2 screen doesn't have a MicroSD card slot. Not anywhere on it. So while I'm able to update the mainboard firmware, I can't update the screen firmware. what gives?
I already did the marlin update (also the pressure advenced and input shaping btw) but I font have an SD card slot on my creen...
Anyone tried it ? I bought my first fdm printer, a kobra 2.0 and directly updated board and Display... didnt tried the faster settings. Anyone tried it so far ?
Any issues with this firmware? A lot of people are staying on 2.9.3 due to it being more stable than the newer ones
So far I haven't had any problems with the new firmware
@@RobotLk ok i might have a look 👍
Bro I even formatted my microSD card and only put the file in the card and it wont update firmware???
wish someone would do this for the K2Max
www.anycubic.com/products/anycubic-kossel-3d-printer
hello, have a lot problems with 3.0.6 firmware, dont work at my printer. cannot calibrate Module. Maybe its ncessary to update the Sceen to work complete?
The screen needs to be updated.
@@RobotLk thx, i will try, what is you normal print speed. Have little ghosting, or, looks like that.
Update the PrusaSlicer settings. You can change the printing speed by changing the print setting. Refer this pdf
drive.google.com/file/d/1U3eobMOb2IgBkFM1IME7WMVEdEwIy_yI/view
The print speed can be increased up to 300mm/s. I recommend not to increase it more than 200mm/s.
Hmmmmm... no beeping when I move it to the printer. 😞 Firmware not updated.
After the update i dont know what happened, it was successfull but the results are not even close as good like before... Also Cura seems to be not suported and i have to reset and level before any print. since the update i wasted 1kg pla just testing to get a benchy... still no success, always different errors with Z homing is faulty or wiring not correct which is bullsh*... if anybody got a solution i would be very happy.
A separate update is needed for cura
drive.google.com/file/d/170L5J1IZMJ6ZVOkNt4dI0MkcvKeBq_f2/view
Download it from the google drive link I sent. Extract the rar file with winrar. Update it as per the readme.docx. Then it will be fixed.
Ive got 2 of these printers and bed make a grinding noise while fast printing on 3.0.6 filmware is this normal ?
That's normal. But don't print at full speed
same issue. Anycubic develeoppers are craps
My printers x axis misses steps and the nozzle then prints here and there because of the changed locations, i had removed the motor and felt little bit jamming of the shaft, its just 4 months old, is it normal , how can i be sure that its the motor only thats causing the issue ,should i just install the new motor and see?
store.anycubic.com/pages/anycubic-support-center
It's the new update, go back, I'm the same as you
@@daninavarro2716 actually there was a screw which got stuck between the aluminium profile and head in my case which was creating the prob
the newer update will no extract the screen file, I keep getting an error
@pnwfarmhousedesignco Same here, have you found out how to do it yet?
didnt pay attention this bricked my kobra 2 neo
thanks, now nothing is printing correctly. a big mess
my TFT screen does not have the card slot
The display of the new Anycubic Kobra 2 does not have a card reader slot. Check this website for details.
store.anycubic.com/
I know now, I took the casing off & done it that way
For those who do not have that slot, simply remove the screen and with the plate removed, put the card in, turn it on and wait for the update, when it is finished, reassemble it and that's it. I just finished it with mine
my screen don't have the card slot 😂
Anycubic kobra 2 🤔
same as mine, I submitted a ticket and they sent a replacement cover
@@keeemdarrel So it was just an issue with the cover? That's weird!
@@keeemdarreldid they replace the whole screen or just the cover? If just the cover how do you remove or swap it?
For those who do not have that slot, simply remove the screen and with the plate removed, put the card in, turn it on and wait for the update, when it is finished, reassemble it and that's it. I just finished it with mine
Dont buy that printer
What are the problems with 3d printer?
@@RobotLk Thats just a piece of sh----t. I've buy a kobra 2 and m5s. 2 bastard product. Impossible with the kobra 2 2 have a correct first layer. Printer arrived bad assembly. A piece of crap