Power Hobby 209MG VS AGF-RC B53BHP Budget Servo Shootout
ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2022
- Power Hobby 209MG VS AGF-RC B53BHP Budget Servo Shootout
Power Hobby 209MG
www.ebay.ca/itm/383593444334
AGF-RC B53BHP
www.agf-rc.com/agfrc-high-spe... - ยานยนต์และพาหนะ
![Programmable Servo! AGF RC Brushless Servo A81BHSW [Servo Test] - Netcruzer RC](http://i.ytimg.com/vi/rr50R2yRVu0/mqdefault.jpg)
![ตีสิบเดย์ [FULL] | คู่รักแซฟฟิก "หลิงหลิง - ออม" จากซีรีย์ "ใจซ่อนรัก"](http://i.ytimg.com/vi/zs8AfphGn2w/mqdefault.jpg)
Those 209MG’s got my MC hopping!
Awesome video as per usual my guy.
looking forward to that jump video comparison! That's where the money is going to count!
This is absolutely hilarious brother..... Looks like I found my next budget servo to try.... Hope the gears are tough because a great spec/pull like that is just part of the story.
Thanks for this
Do you have to program them
Did you make the hopping video with the blue Tower Hobby servos cuz I got two of those in one of my six fours and then I got two of the yellow reefers in my other six for I wanted to see your video and what you think can you let me know please thank you
Yesterday that's the testing I got planned for tomorrow. Gonna run rum with 209 and SA33 basically a Hop off between the two
That agfrc is my go to for on road steering. The tq is great and the speed is awesome for the price. Now for hopping I have yet to venture in that area lol
The 209mg a much better hop servo turns out they ship them at 39% pwm :O
These AGF tho are great in the back end
I'll say it with you, WTF! That is an awesome servo! 👌
I'm still kinda shocked, specially since it's specs say 275oz like WTF lololol
Would you recommend the AGFrc B53BHP on all for corners for the Monte just to bounce and not hop
Yup, the servo plenty fast n plenty strong just not gonna bounce like as if juiced up on Reefers 300's
@@NorthSideCustomRC is it possible to do a video on of the vehicle hopping or is that too much to ask
@@NA5TY_RC not too much at all. I put one together
In this video where the 209mg set at original 39.2 PWM power?
no, both servo were at factory settings as was no power hobby programmers available at that time, well nobody seemed to know they could be programmed. I figured it out later and after getting the programmer saw they factory set to 39% power, and with Power turned up to 100% they are a completely different servo and leave the B53BHP in the dust
@@NorthSideCustomRCwhat is the programmer called have this same servo
@@jasond1245 "Powerhobby USB programmer"
I got that on my wish list at Amazon that 209 servo; that is going to be my hop servo thank you for showing this video bro😍💙🙏🏿😍💙🙏🏿🔥👍🏿👊🏿✌🏿💪🏿
I'd wait up a sec if plan to use it as Hop servo
It do not hop better than Reefs 300. The speed of the Reefs negates the increased power of slower servo that are stronger.
Reefer 300 is so fast it use it tq better like makes more hp with same tq because it Rev faster. Anology is rough but kinda works.
I got something soon to be tested might be stronger and faster than Reefer 300. Just stuck in shipping
Hey homie which car you have that your putting the 209 mg servos I’m trying to see what I can do to make my Monte Carlo hop t
@@EseSmokeysCustoms
CHeck this out
th-cam.com/video/HZx-Ea56Ym4/w-d-xo.html
@@EseSmokeysCustoms I got this 209 servo on my wish list on Amazon ;I've already seen it in action on TH-cam I think it will be a great fit to my car🔥🔥🔥🔥🔥
@@GOD2GINO4EVER but which car do you have??
I been using a cheaper coreless 9Imod 45kg in my E-truggy, it don't have enough power so I moved it to my buggy to test out?? I am putting the powerhobby 729 bls, in the E-truggy. It was over kill, in buggy. The savox 1271sg worked well in the buggy, not too powerful, and not underpowered. I bought a new one for the buggy incase the other 2, 9Imod servos, (1 still not here yet the brushless 45kg) don't do the job! The powerhobby I had in my buggy, and now in truggy should greatly improve the truggy. It should be awesome and help the low speed pushing in the tight corners.
Asome test man.....nice
Much thanks, gonna be interesting to see them face off real world hop challenge
What is the best for my monte carlo because servos stock suck à lot lol thanks you
If Just want better movement these B53BHM are super fast n plenty strong enough, but if you want it to hop like a 64 takes some custom work on the chassis on top of the power servos. I have something should be here this week for testing might out punch the Reefs 300 stay tuned
Thank you
If the Reefs 300 Servo is faster why does it get hot????
The 64 has mechanically limited travel. Making it critical to set end points correctly.
Every servo will get hot in the 64 jump servo location it's just a high Amp demand to hop the 64, but if end points not perfect it get hot very fast, got to make sure end points are right so at rest servo naturally cools down (no load at rest)
The video on setting end points will help.
Need temp sensor (20$ and hoby shop) and insure as you set up end points. When not on hop switch. She's cooling down. Takes time even when you set 100's of servo up before just have to be sure it's right.
Won't change with servo. Any servo get hot if same set up
@@NorthSideCustomRC ok
Dude you have to put that power hobby in a lowrider. I was shocked at the power. I believe that torque will make up for the speed. I would like to see a more expensive power hobby servo test.
I'm a do just that and put her in the 64 for testing along with the SA33. They pretty close overall and it's a tad faster. Gonna be interesting.
Legit was not expecting that much power out of the Power Hobby Servo. I ordered a next one in case I wanna put 2 in the rear of my Blue 64 n use the SA33 in there now Fer jumping lolol
Where are you located. I’m in NC and there’s a little racing in my area but no one messing with the lowriders
@@Jasonkartracing I'm in Canada. Kinda same thing local got some racers bathers n crawlers but nobody else I know messing with lowriders but the scene is new hopefully some catch on
Should use a laser temp gun to measure how hot they get when hoppin.
I have a temp sensor I use to monitor servo temps
@@NorthSideCustomRC do you think it’s worth putting a fan on the servos to cool the em down?
@@MotoMatt nah, no need. if set up right they really dont get hot
wow cant wait to see them in the impala or monte hurry and put them in 😂 jk but 4 reals what are you waiting for cant wait to see it in action
I'm on it, finished filming n editing last night pretty late, I don't make much off the TH-cam I'm still doing landscaping 7 to 5.
Should have time to run some test tomorrow. Hop swaps take a bit to film as got to redo end points every time you swap the servo, gets tedious cuz have to be spot on set up or thro test results off
@@NorthSideCustomRC no i understand bro gotta make ends meet first and yes endpoints have to be on point so it will work right nice find nice vid and of course thanks for sharing the info with us
I laughed so hard,,,, WTF🙆♂🤷🤣
I am going to buy the 209 I am done with reefs🥺😔🤬
I got something might out do a Reefs. The kicker is they so damn fast hard to out pop them but I got something in shipping might do just that
@@NorthSideCustomRC hey when you get this product you show me what it looks like and I'll go look it up on Amazon🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿🙏🏿
@@GOD2GINO4EVER as soon as out of Cali n getvto me I get thrm on the rig.
this is genius. thanks for sharing bro