is there a manual or how-to setup a phisical output switching by software event to for instance a red warning light ? i cannot find any information on that topic in relation to uccnc. the only thing i found was your video on the e-stop button
I see that you use UCCNC quite a bit. I have it working fine on everything I need except Probing an internal circle to centre work on my mill. I currently have V 1.2111 and it has the probe tab and probe function displayed. Unfortunately I cannot get it to work and wonder if you have it working and what version of UCCNC you used. I previously used Mach 3 and had a reliable probing working and also did some work playing with VB macros. I am looking for someone that has probing working that can help me use the standard screens. John
@@diycnc3442 I have joined the users group and so far I still do not have a working probe. I have seen some probes that do work on TH-cam videos so it must be possible, but no one can tell me what version software that they are using. It is a simple question, can you probe to find the centre of a hole and what software version are you using. John
![fellow fellow - พรุ่งนี้ไม่มีใครรู้ feat. INK WARUNTORN [OFFICIAL MV]](http://i.ytimg.com/vi/QP6JyjYx_W0/mqdefault.jpg)
is there a manual or how-to setup a phisical output switching by software event to for instance a red warning light ? i cannot find any information on that topic in relation to uccnc. the only thing i found was your video on the e-stop button
Join the UCCNC users group on Facebook for help.
My only suggestion would be to use a relay triggered from an output pin.
Trying to create custom led on any screen they disappears. How to solve that?
Save the screenset.
@@diycnc3442 Thank you for the quick reply, Is there any tutorial on creating custom led on UCCNC? I'm very new for macro programming.
@@wnbrook4220 get onto the "UCCNC Users" group on Facebook and ask the question there. Some of the members are extremely skilled in macro writing.
@@diycnc3442 Thank you sir, will do.
I see that you use UCCNC quite a bit. I have it working fine on everything I need except Probing an internal circle to centre work on my mill. I currently have V 1.2111 and it has the probe tab and probe function displayed. Unfortunately I cannot get it to work and wonder if you have it working and what version of UCCNC you used. I previously used Mach 3 and had a reliable probing working and also did some work playing with VB macros. I am looking for someone that has probing working that can help me use the standard screens.
John
Hi John
Try joining UCCNC users group on Facebook. There is a wealth of information and help in that group.
@@diycnc3442 I have joined the users group and so far I still do not have a working probe. I have seen some probes that do work on TH-cam videos so it must be possible, but no one can tell me what version software that they are using. It is a simple question, can you probe to find the centre of a hole and what software version are you using.
John
Nicee