Hey Guys, As you have probably noticed already i have updated the channel name and logo. The channel is no longer Really Random Channel it is now RRC Restoration. Just incase you were wondering why the water marks in the video still say Really Random Channel. Enjoy.
Perfection. I see others try this, and fail to protect machined parts from sand blasting. They use the wrong fluids in the wrong places. Your efforts to prevent cross contamination are second to none, in the TH-camverse.
for the smaller passages i think ear plugs would be a great fit, just roll them up like youre putting them in your ear and then pop them in to the threadi g
This is the most rewarding video I have watched. There's just something about being able to fully restore something, and the process that comes with it is so satisfying.
I have done this exact restoration on my Subaru 4/2 pot callipers. I purchased new bolts and clips because they were so cheap. I polished up the pistons and installed the rebuild kit, repainted the callipers and 4 years later they still look as new. Was such a worthwhile process considering how super expensive these callipers are to buy new.
@@salacommander26741000%.....02 wrx here blasting off daily with 305hp/304tq...stopping is definitely worth it...good pads too...brembo makes decent pads/rotors for these too that aren't too expensive imo.
Nice job. Anyone doing this at home you should use stainless pistons. The nickel whatever coated ones will stuck in a year. Also neat trick you can do is instal those pad pins backwards and do a cool aviation style locking wire setup on the outside.
I had a 1999 GC8 that I bought new here in the US that I had to import a complete STI drivetrain to make it a WRX. Now I have a 2020 STi and I still miss that GC8. Super jealous of your build and really appreciate you doing all of this to keep her on the road.
I can only think of a couple reasons, mostly because the brakes were perfectly fine before "restoration", although they were dirty and a little ugly. And some people don't like painted calipers because the brake pads can get so hot that cheap paints flake off like dry skin.
now i regret selling my top to toe V4 Type R restoration now...that said, Ive just bought a pair of knackered calipers and plan to restore them for my R53 big brake kit mini cooper project! thanks for the inspiration.
I had front and rear wrx brakes on my Legacy wagon. Machined both down, to a smooth finish, and placed "LEGACY" on the front ones (similar as original) and the jdm "L" from the Legacy's of the time. Miss that car.
I absolutely need to restore mine !!! Awesome work!!! Did you use a high temperature primer and paint or a normal one? Would be great to have the links to the products used!
Simplest things always look good when you restore them....Oh, and it's always about having the right tools to do the job. Nice video, very therapeutic to watch!
man, you are an artist... I would like to have you and your equipment locked in my garage with my Mazdaspeed6 for a few months... not to worry though, I would feed you...lol
Every time you start disassembling stuff in your videos, I'm like: -I can do that too! :) Every time you start reassembling stuff in your videos, I'm like: -Crap, I can't do that... LOL
@@craccozelpa aren't we all XD, i had to dissemble my right foot peg after I was in an accident. dissembly: 5 minutes, reassembly: 1 hour. I kept forgetting where to put the brake springs
Would love if you could have detailed annotations on-screen as to which processes youre using, what materials/chemicals and why! Super good video but as someone who isnt familiar with things a lot can look foreign
Great content!! As an Evo X owner (Although, I very much appreciate & respect WRXs/STIs), you did an outstanding job on those calipers & bolts!! I wish my calipers looked as good as those do!!!
Dupli-Color makes a really good caliper paint in an aerosol spray. Goes on good, levels out nicely. It's high-temp also. A good alternative to powder coating.
Great video, Ive been restoring them this way for a long while. Any chance of a closer tutorial on the bolt restoration, zinc plating etc as I have always replaced the fixings at additional cost, when they turn out as good as new I would rather do as you have. Cheers
Smashing result. Can I ask what cleaner you use in your parts washer? Even a deep clean made them look a lot nicer. Granted the respray made them look like new. Subarus look nicest, Brembo is just a bling fad unless it came with them from the factory, more important that the caliper is well maintained and fitted with decent pads imo
Another great resto video. Did you use a high build primer & 2k lacquer? Would be very interested to see a plating video like you do for bolts/brackets etc, including how long the fluid will keep before replacing it etc 👍
Good to see george being safe! Haha I havent watched all of it yet but I already know these are going to look gorgeous. I stayed motivated from the last Subaru video and gutted my forester interior the other night and deep cleaned all my carpets, removed the seats and shampooed them etc. So thanks for the motivation mate :)
You have some serious tools at your disposal. The machine for cutting the sticker out haha! Love it. I have alot of kit myself but in a 1 car garage Ive got no room to moving making any task under the car a damn nightmare. Amazing channel mate. You have a new subscriber! Keep them coming.
When fitting pads, the use of EBC Redstuff will drastically reduce the level of brake dust produced that will spoil the finish on the calipers and wheels. They give great performance too........they're the only pads I ever fit to my Impreza.
I respect the level of work, but since I don't have the ability to do half of what he does I settle for a spray can paint job and new bolts/pins/pistons. One day I'll get there!
This caliper set looks just alike the z32 sumitomo set, im restoring mines... any chance you have a video for the electronic plating process for the bolsts?
perfection in your hands and works, it is formidable congratulations, a good question two. before you give the first you give it black paint that is ?? and the second can be varnished on top of the sticker, nothing happens to him. Thank you fantastic video.
So crispy clean! I look forward to finally doing this to my rear 2 pots. Minus a few steps I don’t have the equipment to accomplish hahaha! Any idea where I can find high temp decals for the rears?
The mounting holes on these also happen to use aluminum inserts and the bolts are steel which will cause the bolts to seize up over time. It'd be nice to have an easy solution.
I would like to see more please lol. Both Subaru and Brembo looks amazing but would prefer the brembo on my subie as i have tested them both and got great stopping power with it. Love the vids, keep em coming ama keep on liking em cheers..
Hey Guys, As you have probably noticed already i have updated the channel name and logo. The channel is no longer Really Random Channel it is now RRC Restoration. Just incase you were wondering why the water marks in the video still say Really Random Channel. Enjoy.
instaBlaster
@@sagedarwin3024 aaqqqññ
@@sagedarwin3024 q
Qqq
@@sagedarwin3024 qqqq
Perfection. I see others try this, and fail to protect machined parts from sand blasting. They use the wrong fluids in the wrong places. Your efforts to prevent cross contamination are second to none, in the TH-camverse.
Thank you so much for your kind comment :)
Yeah, but just a shame most people watching doesn’t have a Scooby what the F the fluids are pal
for the smaller passages i think ear plugs would be a great fit, just roll them up like youre putting them in your ear and then pop them in to the threadi g
This is the most rewarding video I have watched. There's just something about being able to fully restore something, and the process that comes with it is so satisfying.
Thank you, Glad you enjoyed it :)
I have done this exact restoration on my Subaru 4/2 pot callipers. I purchased new bolts and clips because they were so cheap. I polished up the pistons and installed the rebuild kit, repainted the callipers and 4 years later they still look as new. Was such a worthwhile process considering how super expensive these callipers are to buy new.
I'm thinking upgrading my '04 WRX to these calipers, at least for the front wheels. Would you say they're worth the cost?
@@salacommander26741000%.....02 wrx here blasting off daily with 305hp/304tq...stopping is definitely worth it...good pads too...brembo makes decent pads/rotors for these too that aren't too expensive imo.
Nice job. Anyone doing this at home you should use stainless pistons. The nickel whatever coated ones will stuck in a year. Also neat trick you can do is instal those pad pins backwards and do a cool aviation style locking wire setup on the outside.
Best resto channel on the tube, Squire. No fake rusted up shite, just good old no nonsense, real life work.
Thank you so much :)
You should definitely do a how to ‘re-plate’ at home video👍.
Been hoping for one. Want to learn so I can try to replate some vintage watches.
@@ro63rto Go to Cameron Niemelas TH-cam channel he did a very specific guide how to plate bolts.
George had his mask on and was social distancing lol. Once again, a perfect restoration!
I cant explain the satisfaction of seeing old this new again. Great job!
You really went above and beyond with those. If I had found those calipers at the junk yard I would have put them straight on my car pads and all.
If those aren't the CLEANEST brake calipers... Man... Also the detail this man puts into the calipers... Insane 🤯
Glad you liked the final product :)
It’s crazy how well electrolysis works. I did this on a bigger scale with some rotors to experiment and boy were the results just crazy. Rust be gone!
I definitely prefer the Subaru livery, they came out perfectly. Ill never tire of watching you plate parts, always so satisfying :)
I had a 1999 GC8 that I bought new here in the US that I had to import a complete STI drivetrain to make it a WRX. Now I have a 2020 STi and I still miss that GC8. Super jealous of your build and really appreciate you doing all of this to keep her on the road.
Nice :) Glad to have you along for the ride.
Why would someone give thumbs down to a video like this? There's no complacency...
Subaru owners who don't have the BBK. Fk em.
FOCUSST cause mibbies most folk don’t have a Scooby what bloody fluids he used ?
Only idiots....
I can only think of a couple reasons, mostly because the brakes were perfectly fine before "restoration", although they were dirty and a little ugly. And some people don't like painted calipers because the brake pads can get so hot that cheap paints flake off like dry skin.
@@shippo72 what about powder coated?
Beautifully done. I've never seen someone take so much pride in making sure all the details were done correctly. Thanks for sharing.
Thank you so much for your kind comment :)
Good to see George is safe and well - and wearing his PPE 😀
What’s the torquing specs for the bolts? Beautiful job by the way came out looking better than before!
now i regret selling my top to toe V4 Type R restoration now...that said, Ive just bought a pair of knackered calipers and plan to restore them for my R53 big brake kit mini cooper project! thanks for the inspiration.
The Brembo brakes came out great but the Suburu's have more style! Great job on both though!
I totally agree! :)
The attention to detail was extraordinary, reflected in the finished product.
Anything in shiny red gets my attention immediately so I appreciate all of your attention to detail.
Perhaps this video can be used to teach how perfection is achieved. Great job.
Master of your craft sir. The amount of work that goes into restoration, then the filming and editing. I'd buy you a few pints.
Just tore the 4/2 pots of my WRX this morning to rebuild. This helps a lot!
What torque specs did you use for both?
60NM for the connecting bolts
Did this myself about 2 months ago, rear 2 pots too, didn’t sandblast or etch primer them but they Turned out pretty good imo
Damn, those are better than from the factory! I'm a Brembo fan, but the Subaru logo looks very nice. Excellent work.
Thank you very much :)
Awesome job again mate .i honestly couldn't choose between the 2
Would have to eye them up on the car 🤷♂️
Thank you :) Yeah they are quite difficult to choose between
Wow! You've done an absolutely marvellous job restoring those Sumitomo WRX calipers. Two thumbs up!
Thank you :)
Amazing work , i have a jdm wrx myself and am thinking of restoring it
Nice to see George wearing his mask! Nice work 👍🏻
Thanks! 👍
Stunning restoration of those calipers. It seems a simple process but very exacting. You definitely have to know what you are doing. 👍🇦🇺
Absolutely beautiful 👌🏻
holy shit my two favourite youtube channels and one just commented on the other ones video
Thank you very much , Always a pleasure to see you in the comment section :) I see that your Fiero project is coming along nicely 👍
Great video. If you release the spring clip first, the pins can be easily removed without a punch normally.
Subaru brakes cuz you fixed it all up nice and dandy. Wasnt aware that you could get a brake caliper repair kit. Awesome work as always.
Beautiful resto of those grubby ole calipers, now look out of the box brand new!
the patience you have is phenomenal great work mate 👍
Thank you :)
Beautiful job, and they look much better with "Subaru" vs "Brembo"
"They" are two different brake calipers.
You are a one man factory sir!
I had front and rear wrx brakes on my Legacy wagon.
Machined both down, to a smooth finish, and placed "LEGACY" on the front ones (similar as original) and the jdm "L" from the Legacy's of the time.
Miss that car.
Loved the plating in particular, but the whole video was so satisfying. Personally I prefer the sumitomo (subaru) calipers, since they fit under 15s.
Thanks for leaving a comment :)
I absolutely need to restore mine !!! Awesome work!!! Did you use a high temperature primer and paint or a normal one? Would be great to have the links to the products used!
Well done Mr. Random. It’s also interesting to see your editing skills evolve over time. 👍
Thank you very much :)
Simplest things always look good when you restore them....Oh, and it's always about having the right tools to do the job. Nice video, very therapeutic to watch!
Thank you very much for leaving a comment, very glad you enjoyed watching it :)
man, you are an artist... I would like to have you and your equipment locked in my garage with my Mazdaspeed6 for a few months... not to worry though, I would feed you...lol
Haha well its good to know i'd be fed at least haha Thanks for leaving a comment :)
What was the torque settings for the casing bolts
Fantastic work! Nothing like a Sand blasting machine to clean old parts..
Yeah i would be lost without it now
Beautiful restoration. Makes me realize I should just buy a new set!
Every time you start disassembling stuff in your videos, I'm like: -I can do that too! :)
Every time you start reassembling stuff in your videos, I'm like: -Crap, I can't do that... LOL
Record what you do and if you get stuck, watch your teardown video👍
@@plageran 0 patience hahahaha
Same. I'm a professional disassembler of my vehicles. Just to fuck it up later on
@@craccozelpa aren't we all XD, i had to dissemble my right foot peg after I was in an accident. dissembly: 5 minutes, reassembly: 1 hour. I kept forgetting where to put the brake springs
@@dixonqwerty i hear ya
perfect restoration, keep uploading videos of the subaru
Thank you ,Plenty more to come ;)
Would love if you could have detailed annotations on-screen as to which processes youre using, what materials/chemicals and why! Super good video but as someone who isnt familiar with things a lot can look foreign
They look great! Go with the Subaru calipers 🙂🚗
Great camera work lots of close up details thank you
Great content!! As an Evo X owner (Although, I very much appreciate & respect WRXs/STIs), you did an outstanding job on those calipers & bolts!! I wish my calipers looked as good as those do!!!
Great video. Please supply details on products and process used to clean bolts before plating? A video on how to re-furbish bolts would be perfect.
Dupli-Color makes a really good caliper paint in an aerosol spray. Goes on good, levels out nicely. It's high-temp also. A good alternative to powder coating.
Great video, Ive been restoring them this way for a long while.
Any chance of a closer tutorial on the bolt restoration, zinc plating etc as I have always replaced the fixings at additional cost, when they turn out as good as new I would rather do as you have. Cheers
Now that’s sympathetically restored
Smashing result. Can I ask what cleaner you use in your parts washer? Even a deep clean made them look a lot nicer. Granted the respray made them look like new. Subarus look nicest, Brembo is just a bling fad unless it came with them from the factory, more important that the caliper is well maintained and fitted with decent pads imo
Another great resto video. Did you use a high build primer & 2k lacquer? Would be very interested to see a plating video like you do for bolts/brackets etc, including how long the fluid will keep before replacing it etc 👍
Great job as always dude. Hard to choose between the brembo and Subaru calipers as they are both absolutely perfect 👌
Good to see george being safe! Haha I havent watched all of it yet but I already know these are going to look gorgeous. I stayed motivated from the last Subaru video and gutted my forester interior the other night and deep cleaned all my carpets, removed the seats and shampooed them etc. So thanks for the motivation mate :)
Nice, I cant wait o finish the mechanical work and give the GC8 interior a good deep clean aswell its absolutely filthy haha
@@RRCRestoration its so satisfying!
You have some serious tools at your disposal. The machine for cutting the sticker out haha! Love it. I have alot of kit myself but in a 1 car garage Ive got no room to moving making any task under the car a damn nightmare. Amazing channel mate. You have a new subscriber! Keep them coming.
Amazing job! If I could do this type of work for a living I’d sign up immediately. 🍻
Thank you :)
Great job, I would use powder coating as it’s more resistant to heat
Thank you :) , Ive always preferred paint over powder coat though.
When fitting pads, the use of EBC Redstuff will drastically reduce the level of brake dust produced that will spoil the finish on the calipers and wheels. They give great performance too........they're the only pads I ever fit to my Impreza.
It's commendable that you take care of George's health but he also needs to feel that he has a higher aim in life.
So jealous. If only I had the equipment and space you have at your disposal
Fekkin brilliant! I need to do this with mine which are identical except they have "WRX Pro" embossed onto them.
Thumbs up.
BTW, did you remember to put both o rings in for the caliper halves this time? :)
Wow. Unreal !!
Beautiful job !!
Man you have all the right tools !..
Love for you to work on mine !!
They turned out really great - as usual I must say! 👍👍👍
Always a pleasure to see you, Glad you liked the restoration :)
@@RRCRestoration Thank you very much, and I'm here although I've been somewhat absent lately - you know Covid-19 and such. :)
So amazing!!!!! Perfect job man! You have tons of patience!!!
Suburu?
Impossibru!
both of them looking awesome I prefer Brembos for front, Subaru ones for rear 😋☺
haha if they would fit under the rims i would certainly consider it ;)
Look better then new...very nice job.
Thank you :)
Beautiful. I would display them on the mantle piece.
Superb restoration, perfect paint job 👍
I respect the level of work, but since I don't have the ability to do half of what he does I settle for a spray can paint job and new bolts/pins/pistons. One day I'll get there!
Such an awesome video… loved watching it . Gunna try my own now
Awesome workmanship done right!!!
Nice... I am inspired... I will be doing this to my 4Runner brakes...
This caliper set looks just alike the z32 sumitomo set, im restoring mines... any chance you have a video for the electronic plating process for the bolsts?
you did a fantastic job there.
was a little suprised when you got the flapdisk out, I thought i'd see the file bag.. :-)
Haha yeah i was going to use the files and then i thought nah lets do it the quick way today haha
these look bloody great... what a piece of work... awesome...
Thank you! Cheers! :)
Very nice job! I appreciate your work!
PS: i have no SUBARU, I will go with BREMBO 😉
perfection in your hands and works, it is formidable congratulations, a good question two. before you give the first you give it black paint that is ?? and the second can be varnished on top of the sticker, nothing happens to him. Thank you fantastic video.
Wow both are stunning but i do prefer the Subaru's. Great watch.
I have these brakes right now and they’re currently seizing up. I’m puttting 5x100 STI brembos and restoring these to keep forever.
Amazing work man.
What paint and clear coat did you used ?
You really brought them back 👌😎 support from Las Vegas
Thank you very much :)
So crispy clean! I look forward to finally doing this to my rear 2 pots. Minus a few steps I don’t have the equipment to accomplish hahaha! Any idea where I can find high temp decals for the rears?
The mounting holes on these also happen to use aluminum inserts and the bolts are steel which will cause the bolts to seize up over time. It'd be nice to have an easy solution.
I would like to see more please lol. Both Subaru and Brembo looks amazing but would prefer the brembo on my subie as i have tested them both and got great stopping power with it. Love the vids, keep em coming ama keep on liking em cheers..
Brembos, there's a reason they're only on the STi. But it must be in gold "wink"
these arent brembos
@@brandontocket2824 Depends on what year... so technically, TTBT is correct.
Hi my friend 👋👋👋 your clear and impeccable restoration work always inspires me, respect to you 🤝👍👍👍🔥✌🏻🇷🇺
Thank you so much :)
Its a relief to know that george uses protection lol
Subaru calipers, because I have them. Nice video Bro, great job.
Great job. Want to put some on my subaru forester so bad
Fantastic video again! Thanks for posting, mate! 😁
Thank you for watching :)