Звук крайне посредственный, как на видео, так и исходя из конструкции должен быть в принципе. Хорошая акустика(имею ввиду звук, пусть и в портативных колонках), это не абы что в один корпус впихнул и все. Как развлечение норм, как для акустики - проще китайскую готовую купить, тот же звук будет и меньше мороки.
ты прав, звук так себе. Стенки тонкие, перегородки между каналами внутри нету, объема для низких частот тоже нету, очень много вопросов к самому корпусу
I avoided for a very long time this video because I kept thinking it'll be another sloppy diy job. In the end, seeing that YT kept propsing it... I watched it. I have to say that you approach to this is very professional and i admire what you've done. If I would have done it I would have done just two more things: - mount the BT board so that the LED is visible; - add cheap voltmeter to get an idea about battery status
Essas caixinhas são massas são muito boas a tecnologia que usam é fora do comum eu vou fazer um projeto de uma de uma de tubo de PVC de 100 milímetros e duas baterias de moto 60 bota duas boquinhas boas de 60 que é para fazer uma zuada boa para mim e aí vocês vão ver o que é caixa daí o comentário aí ó o comentário que eu estou postando é isso aí bora galera dá uma força aí o cara o cara aí sabe que tá fazendo valeu
Very nicely built. Just no wasted space and beautiful wiring job. Pity that it's not practical; I mean, you can't really take it outside, because the speakers have no grills to protect them. But still, love the video.
Nice video, though a few points to add: 1) You need some sort of crossover/filter for the tweeter and full range speakers to do their job properly. You can get 2 way crossover kits relatively cheaply, or just use a capacitor on the tweeters to make them more suited to the treble frequencies. 2) Using laptop battery packs without checking the capacity remaining is like a game of chance. It may be good still (1500mAh+) or it might be very poor (
CREATIVE CHANNEL: NICE BUILD! but you have to make some research about the amps you use in your projects. this amp, in that impedance configuration will not work longer tan a few days, the loads for that amp, are: Applicable Speaker Impedance: 4/6/8/10 ohm. if you put those speakers with no Xover, just fixing those in paralel, you can reach 2 ohm, and damage the amp.(certainly more loud in exchange of your hardware life). the battery reciclyng are one of the most important things in a project like this, that is a very good point to show in the project. you can improve the sound quality making two ports instead of one port only, and made it from a 1/2 inch water pvc pipe, and fill the enclousure whit some polyfill or cotton. anyway, nice build.
Ren Draco hey, just read your comment,it is informative. I am planning to make one for me. Could you please suggest me all the parts. BTW I am expecting good bass performance
Se ta ligado que fico mal feito ne kkkkk e so fazer a conta sao 30w pra alimentai isso com 12v vc presisa de uma corrente de pelomenos 2.5 amperes cada bateria da litio tu pode tirar 5oomah ele tem uma filheira em paralelo entoa ele tem 1 ampere de bateria e ele sabe que nao pode toca no maximo observe que no video ele nao ergue a caixinha no ultimo kkkk so ate a metade que e oque aguenta a sei disso porque fiz um projeto com as mesma pecas
Those speakers will make better noise if you put big cones on them. The pressure of air is making a turn backwards because the edge of the speaker is in the edge of the box. A cone like a trumpet. Probably a metal bowl of salad or something like that while in your room. You can take them apart for mobility. Very nice work, you inspired me to do something similar, if I do I'll return with results.
It has a hole, ported like what?. A crossover would help though. I have small powerful speakers and I covered the holes so the speaker wouldn't wobble.
kinda loving the compact design, though i think a more fitting bass port could make it a ton better. just a basic measurement of the volume inside it, and a simple online calculator is needed for that. still really good, and compact design.
Well built but you should of used MDF wood as this is sound proof. Put dividers inside of box for larger speakers as mix wave vibrations can cause sound distortion.
the volume of air the bigger side drivers push is waaay to much for that port to handle and its pushing out the small middle drivers. then again if the bigger drivers had a sealed space of their own the space would be to small for the driver to do any work either. so prob just fine tune the ports/ add ports
MDF is not sound proof, quite the opposite. Many years back i made speaker housing from MDF it was way boomy and not sounding good. Might be a good idea to line the box with some foam or old carpet to dampen out the resonance. Tell me im wrong.
cool. Only thing is i wouldn't of left it bare wood as it's something you would handle and will absorb oils from your skin and in time will start looking dirty and nasty. I would of stained it and then gave it a coat of 2 part epoxy so it would have a good strong coating.
u cykablyat he connected 2 speakers with impedance of 4 ohms in parallel so you get impedance of 2 ohms using this equation: R(at the end)=(R1xR2)/(R1+R2)
The main challenge is to get the same spare parts. U never gonna get the same things he used in it, how much u get the inspiration from the videos but end of the day ull be on ur own , ur own imagination of the thing , nd on ur own skills
I made external speaker for my ham radio using 4X 8ohm speakers from old suround saound system wired in parallel and housed in an old quality street tub. I also added stuffing inside. Why do you never use any stuffing/padding inside your speakers?
Awesome bluetooth speakers. Could have made it a bit better with a 5v bluetooth stereo module which has bluetooth, usb, microsd, aux input and FM radio, it would have costed about the same. You also could add USB charging to it.
Tenho uma caixinha de som que essa mulher ta me enjoando, toda vez que LIGO e conecto o bluetooth dela essa mulher enjoada fala. Afinal o que ela diz??
O primeira frase a voz diz que o sistema está pronto para preamento. Neste momento você localiza e escolhe no seu dispositivo e a voz fala: O sistema foi conectado com sucesso. É isto.
De los mejores vídeos que he visto en TH-cam excelente trabajo y que lindo le quedó sólo imagínense en colores está belleza
u should fix a safety grills to speakers
2ohm per channel. It's going to heat up extrem.The amplifier is made for 4ohm.
DEAR BRO IF USE 8 OHAM SP BOTH PAIRE RESIST AT PERALAL CONECT..4 OHAM
@Vinodkumar Deugi I have this Amp too at 4 ohm it heats up a lot how do you want to know this?
@@sumairajput333 bb
@@sumairajput333 jjh
@@bluecrafter_ he has big brain thats why
Very nice
If you add passive radiator the bass will be nice🔥
You can also check my channel 🙃
I wish one could be build for me like this
Звук крайне посредственный, как на видео, так и исходя из конструкции должен быть в принципе. Хорошая акустика(имею ввиду звук, пусть и в портативных колонках), это не абы что в один корпус впихнул и все. Как развлечение норм, как для акустики - проще китайскую готовую купить, тот же звук будет и меньше мороки.
ты прав, звук так себе. Стенки тонкие, перегородки между каналами внутри нету, объема для низких частот тоже нету, очень много вопросов к самому корпусу
В такой корпус одного бьі динамика хватило того что побольше
When I saw how close you packed that little box I thought it would never sound any good.. Its actually really impressive.... well done! Genius!
I avoided for a very long time this video because I kept thinking it'll be another sloppy diy job.
In the end, seeing that YT kept propsing it... I watched it.
I have to say that you approach to this is very professional and i admire what you've done.
If I would have done it I would have done just two more things:
- mount the BT board so that the LED is visible;
- add cheap voltmeter to get an idea about battery status
Essas caixinhas são massas são muito boas a tecnologia que usam é fora do comum eu vou fazer um projeto de uma de uma de tubo de PVC de 100 milímetros e duas baterias de moto 60 bota duas boquinhas boas de 60 que é para fazer uma zuada boa para mim e aí vocês vão ver o que é caixa daí o comentário aí ó o comentário que eu estou postando é isso aí bora galera dá uma força aí o cara o cara aí sabe que tá fazendo valeu
Nice tutorial,but the box is very small for great sound quality!!!
I have smaller bluetooth speaker, and it has got better sound than brother's jbl charge 4. But you are right about most of bluetooth speakers.
save the turtles
JBL Speaker on a budget :D
Same design but jbl has 2 less speakers
Very nicely built. Just no wasted space and beautiful wiring job. Pity that it's not practical; I mean, you can't really take it outside, because the speakers have no grills to protect them. But still, love the video.
quanta criatividade e muita inteligência eu gosto de assistir esses vídeos porque eu aprendo muitas coisas
You are a great genius, incredible product. Congragulation.
I5 laptop is
looks cool I wish I had one although I am going to be getting a jbl boombox soon with my own money
th-cam.com/video/xSzynIuUQAo/w-d-xo.html
A fantastic work of the best I've seen on TH-cam you are a machine, congratulations.
That was pretty cool, but I have NEVER watched a TH-cam video with as many ads as this video had. Ever.
Очень классная и оригинальная самоделка. Лайк
Nice video, though a few points to add:
1) You need some sort of crossover/filter for the tweeter and full range speakers to do their job properly. You can get 2 way crossover kits relatively cheaply, or just use a capacitor on the tweeters to make them more suited to the treble frequencies.
2) Using laptop battery packs without checking the capacity remaining is like a game of chance. It may be good still (1500mAh+) or it might be very poor (
1
your work finishing is much better, you crossed 1M - as my thought you can now purchase pen solder for great ..
The Bluetuss device is ready to pal. Awesome! it sounds like the Bose bought in the beach.
th-cam.com/video/xSzynIuUQAo/w-d-xo.html
Creio que ficaria mais bonito se os falantes fossem parafusados por dentro
You are genius
CREATIVE CHANNEL:
NICE BUILD! but you have to make some research about the amps you use in your projects.
this amp, in that impedance configuration will not work longer tan a few days, the loads for that amp, are:
Applicable Speaker Impedance: 4/6/8/10 ohm.
if you put those speakers with no Xover, just fixing those in paralel, you can reach 2 ohm, and damage the amp.(certainly more loud in exchange of your hardware life).
the battery reciclyng are one of the most important things in a project like this, that is a very good point to show in the project.
you can improve the sound quality making two ports instead of one port only, and made it from a 1/2 inch water pvc pipe, and fill the enclousure whit some polyfill or cotton.
anyway, nice build.
Ren Draco hey, just read your comment,it is informative. I am planning to make one for me. Could you please suggest me all the parts. BTW I am expecting good bass performance
@@AkshayKS hi there, sorry, i don't saw the notification about your message, still, if i can give you any help, i will be glad.
Very well done to say the least! It pays to know exactly what to do and how all the electrical components go together. Thanks for sharing!
مجب اسم السيد بحر مجو
Xwg ASG@@ياسمينطه-ن3ي 44
Fvv
ین
یتترتب
Such a great Idea. I can upgrade to blasting boom. Thank you
Bbñbhasp
very very nice and very very beautiful.
I would LOVE to have this speaker. Good job
xd
que hermoso eso... wow esa es mi pasion, la amo!!!
Great work!
Ficou muito boa amigao... Queria saber fazer uma pra mim, show de mais!!!
Se ta ligado que fico mal feito ne kkkkk e so fazer a conta sao 30w pra alimentai isso com 12v vc presisa de uma corrente de pelomenos 2.5 amperes cada bateria da litio tu pode tirar 5oomah ele tem uma filheira em paralelo entoa ele tem 1 ampere de bateria e ele sabe que nao pode toca no maximo observe que no video ele nao ergue a caixinha no ultimo kkkk so ate a metade que e oque aguenta a sei disso porque fiz um projeto com as mesma pecas
@@beudolk8235 kkkkkk Simplificando tu aprendeu na pratica
kkkkkkkkk
Woww.. I think I would like to modify the broken simbada speakers using this methode. Amazing...
Those speakers will make better noise if you put big cones on them. The pressure of air is making a turn backwards because the edge of the speaker is in the edge of the box. A cone like a trumpet. Probably a metal bowl of salad or something like that while in your room. You can take them apart for mobility. Very nice work, you inspired me to do something similar, if I do I'll return with results.
Science of Self it also need to be ported
It has a hole, ported like what?. A crossover would help though. I have small powerful speakers and I covered the holes so the speaker wouldn't wobble.
That Works fantastic, i loved It!
cool idea, the "woofers" are kind of fighting each other though
Great job... So nice and useful video.love your job
Xdd
Good Bluetooth speaker got some bass
I love ❤️ this songs
kinda loving the compact design, though i think a more fitting bass port could make it a ton better. just a basic measurement of the volume inside it, and a simple online calculator is needed for that. still really good, and compact design.
Perfeito amigo estou concertando bastante caixinhas de som!
? Iiijn. N. N. Nnn. Nn ? U.ک
If the box is closed it would be more bass
If you use two passive speakers and. Two big speakers it will sound more awesome
Великалепная сборка😅....мда запихнуть в притык😅🤔🤔🤔....
i just love your work ,I will be happy if you helped me with blue print of six speaker rated 16 ohms 8W Bluetooth subwoofer
Wqeetwetr
dude you're very good! too good, I even wanted one of these for me. Top project
do some Bass testing on this bluetooth speaker :D i would love to see that aswell !
th-cam.com/video/xSzynIuUQAo/w-d-xo.html
Wow NCS.
Love Alan Walker.
Fancy that.
Cool as bluetooth speaker.
Wow beautiful
great build and design
so creative
make me wanna build
good
i saw the thumpnail and expected to see a massive speaker setup with some 12in or 15inch subs and its something small lol.. overall another good video
How can u see a 12" in a "woofer" with only 4 screws?
Same tho
wonderfull project! Sensacional...
Vaiya amaka akta sayun box gifit koro .Home bangladesh
Good job dude👍👏👏👏👏
Ficou show em
Alguém sabe o nome da música? ?
Well built but you should of used MDF wood as this is sound proof. Put dividers inside of box for larger speakers as mix wave vibrations can cause sound distortion.
I understand the dividers but he did seal the wood inside with wood glue in case you didn't notice :-)
Read the title.
Kind of missed the point of the fun being had in this project - namely putting it in a tea box.
the volume of air the bigger side drivers push is waaay to much for that port to handle and its pushing out the small middle drivers.
then again if the bigger drivers had a sealed space of their own the space would be to small for the driver to do any work either.
so prob just fine tune the ports/ add ports
MDF is not sound proof, quite the opposite. Many years back i made speaker housing from MDF it was way boomy and not sounding good. Might be a good idea to line the box with some foam or old carpet to dampen out the resonance. Tell me im wrong.
wow.i like you job.very simple and perfect working job.very nice speacker.
you are born to do such things...Keep producing the good work..m a big fan of you..God bless you!!!
But can you also program the Chip to maybe play a different sound when ready for pairing?
Now all you need to do is take some fabric and make covers for the speakers!
Trabalho incrível .faz pra vender?
Passive radiator must be added on this bass!
Cgurado maot nig tingog. Gamay kayung space sa sulod.
"This Bluetooth device is ready to pair" 😂 that voice
lmao! "The Bluetooth device has pair Eh successfulleeyyy"
0
It's more like: “Thi bluetooth device es connectidos successfullay“ 😂
Hahahha very annoying prompt.
grill for a speakers protection?
Adf
Молодец что ты сделала такой Bluetooth на колонку вообще лайк поставлю прямо вахуй блютузную колоночки Прямо молодец Молодец пока!
Чтобы ты не делал всё получается чудесно молодец 👍👍👍
cool. Only thing is i wouldn't of left it bare wood as it's something you would handle and will absorb oils from your skin and in time will start looking dirty and nasty. I would of stained it and then gave it a coat of 2 part epoxy so it would have a good strong coating.
GOOD^^ 잘보고갑니다.
2ohm per channel isn't recommended for tpa3110, it will be damaged
Januszek Trollface nie mogę zmienić nazwy correct i think 8ohms will be pretty safe
u cykablyat your right, with 8ohm per channel it may be more silent, but it will be 100% safe
Januszek Trollface nie mogę zmienić nazwy yep
u cykablyat he connected 2 speakers with impedance of 4 ohms in parallel so you get impedance of 2 ohms using this equation: R(at the end)=(R1xR2)/(R1+R2)
Januszek Trollface nie mogę zmienić nazwy check description he has used 4 ohm driver
How much voltage require for this speaker
Can you please help me
The amplifier needs 12 Volts and it controls the output voltage by the input volume
@@d0ubleg78 Hey man.. if any problem i can directly connect to the 12v dc adaptor in that amplifier board without using battery setup..???
Cool bass 🔊🔊🔊🔊🎵🎵🎵🎵🎵🎶🎶🎶🎶🎶
Wow free sony 18650 battery
The bluetooth dwarf os really too pale.
LoL
I also have a speaker that says it.
The bluetooth device is ready to pair ha ha ha....
:-p
You don´t even calculate box volume. You just install everything and that´s it
Так и не ответил зачем тебе такой ноготь ? )))
Их 2, на обоих мезинцах
Козюли из носа выковыривать
muy buen trabajo amigo . yo tengo 2 bocina de 10 y 2 de 6ft y queiro hacer los mismok me dise
i also tried a mini speaker with 3 speakers project success
thanks
it is amazing, thanks for share!!
What’s the music used while making the device?
Itro & Tobu - Cloud 9 (NCS Release)
Ram Ranch
Isube I’m not stupid
Jxu 💋🎂
Awesome work, dude. 😊
The main challenge is to get the same spare parts. U never gonna get the same things he used in it, how much u get the inspiration from the videos but end of the day ull be on ur own , ur own imagination of the thing , nd on ur own skills
Only 25 houses were burned down and 450 injuries were caused by this video.
You used here 6 18650 batteries..
I can use 3or4 18650 batteries
But he used parallel connection in pairs of two to have bigger capacity, also he got 6 batteries from laptop battery so why not use them all?
2 speaker 15w + 2 speaker 3w in parallel ? Burn !!!!?? Overload ?
That's probably a 20-50watt bluetooth stereo module. It would handle those speakers, no problem. It should be able to handle larger home speakers.
Me vende esse estéreo pelo amor de Deus
👍
Harika
I made external speaker for my ham radio using 4X 8ohm speakers from old suround saound system wired in parallel and housed in an old quality street tub.
I also added stuffing inside. Why do you never use any stuffing/padding inside your speakers?
5 dollar cvs speaker build would be a better name for this video, but what do i know
Jack dog yes
That is so cool dude. Love vids like this. Great work
Bro tell me 4 speaker connect to pc...for good sounds effort....
good job men
Awesome bluetooth speakers. Could have made it a bit better with a 5v bluetooth stereo module which has bluetooth, usb, microsd, aux input and FM radio, it would have costed about the same. You also could add USB charging to it.
Amazing bro 😉😉
Wow that was really impressive how much would you charge to build one for me?
306td
306 Canadian dollars
Tenho uma caixinha de som que essa mulher ta me enjoando, toda vez que LIGO e conecto o bluetooth dela essa mulher enjoada fala. Afinal o que ela diz??
O primeira frase a voz diz que o sistema está pronto para preamento. Neste momento você localiza e escolhe no seu dispositivo e a voz fala: O sistema foi conectado com sucesso. É isto.
ceblutio
E um ingles com sotaque kkkk
(quando liga): O dispositivo Bluetooth está pronto para parear. (quando conecta): O dispositivo Bluetooth foi conectado com sucesso.
Ela diz pra vc fazer um curso de inglês 😄
nice..
good work. looking beautiful.
Finally it is over.!
And it ends pretty well.!!
wow amazing bluetooth speaker.. where can i buy that circuit board?😊