Build an All Wire Quail Cage for your Grow Outs
ฝัง
- เผยแพร่เมื่อ 25 พ.ย. 2021
- How to build an All Wire Quail Cage. This cage is specifically designed for grow-outs. A low cost alternative to buying commercially built cages.
Egg Roll Out Cage Build: • ALL WIRE QUAIL CAGE - ...
Modify the J-Feeder for less waste: • Quail feeders - modify...
Please Visit our channel sponsors:
Hatching Time. hatchingtime.com
Southwest Gamebirds: southwestgamebirds.com
![คุณอาเรียโต๊ะข้างๆ พูดรัสเซียหวานใส่ซะหัวใจจะวาย ตอนที่ 4 [ซับไทย] 【Ani-One Thailand】](http://i.ytimg.com/vi/_vK_cden2f8/mqdefault.jpg)
Home Depot sells wire shelving with 1/2" spacing in 6-foot by 20-inch pieces for under $24. They also sell 12" x72" shelves with 1" spacing for under $12. For $86 you could make a bulletproof 6-foot by 20" by 12" tall cage with no bending. That's less that's half the cost of a commercial cage that's quite a bit smaller.
Yep, there's alway a cheaper option over purchasing commercial :)
How woul you o the doors, though? And do you need to put quarter inch hardware cloth on them? I have a bunch of shelves in storage to make free (nearly) but I'm not really sure how it would go. Also, do you put those on shelving units or use them as quail tractors?
Have you made something like this, or is this just theoretical at this point? I'd definitely be down to try something like this.
I like these cages. Very practical for indoor use. I built a 3 tier unit using conduit for the legs (4 straight 6' pieces). I used plumbing clamps to attach the conduit at the side corners of each cage and used no other support. Very quick to assemble. You may could use 3/4" PVC for the legs. Also, wheels can be used so you can roll the unit around. The plumbing clamps are so quick and simple to install.
Thank you for sharing this
Thank you!
Great video lots of information. Thank you so much.
Thank you very much for this video. Absolute time and money saver.
Thank you very much!!
J feeder cut: you could make the side and bottom cuts (only) before the assembly, bending the top flange inward to create a less mess grid design that fits above the j feeder feed trough? Just a thought
So informative!!! You have helped me so much with this undertaking.
Thank you so very much. 🙂
Pure Gold
Another excellent tutorial video. The center piece is a great idea. I built the layer cages 48" long but with no divider. I noticed the sagging at the front. What you installed is better than what I did. I'll be building a few of these soon. Thank you sir!
Thanks, glad you enjoyed it.
Great job my friend" it helps me on building!!
Glad to help
Great looking cage and great info thanks for the info
Thanks, glad you enjoyed it.
Another great video
Thanks
Beautiful view 🪟 and work okay Papa 💯😎
Would it compromise cage strength if I oriented the top and sides by 90deg. Allowing my to run continuous 1 piece of wire for front back and rear? I maybe like to use .5x 1” c 36. PVC coated wire for the floor
Any chance you could discuss wire size and guages along with pros and cons? My understanding is smaller spacing (.5x.5?) is better for predator protection and possibly for their feet on the flooring (think guage plays a part as well) but droppings don't fall through as well, might be harder to work with, and more $. I'll try to remember to ask on the next Live as well
Terry, do you take aluminum flashing and make poop guards to help keep the bird's droppings to go down into your collection tray?
Enjoyed the video and the info. I use to breed meat rabbits and still have 8 of my cages left, sold the rest. I'm planning on redesigning them for quail for next year. Thanks again for the info!
Thanks for watching
I enjoy your videos, and they are very helpful. I am searching around but can't find a link to the type of tray that you use for the droppings. Can you post one up? Thanks!
You can get oil drip pans at Napa, O` Reilly's, or any other autoparts store. You can buy sheet metal or corrugated metal and cut to size with the cutting wheel. When we raised rabbits, we used sheets of reclaimed corrugated metal roofing, which we would pull out and empty into a wheelbarrow. Super cheap if you can find it used. I recommend the painted kind if you can find it
Just to clarify, the metal sheets were on supports that were under the wire floors of the cages.
How tall are your 2x2 studs for your frame ? They look like 6 - 7 ft. Great video! Thanks!
Do you need the special pliers for the j-clips, or can a regular set of pliers work?
Would dropping the height to 8" be too short? If you did 8" front and back and 20" deep, you could do the front, top, and back all out of one piece of 36" x36" 1x2 material rather than having to do the back with the 1/2"x1" stuff. Saves a little money that way. Thoughts?
If I'm not sure how many layer cages and how many grower cages I want, would it be best to just do all layer cages? Wouldn't hurt to keep growers in a layer cage, right?
Where do you get the poop trays from?
What do you do about the manure trays?
Great video! How many grow out quail do you put in each cage?
Around 10 or 12
Where can I find the 1/2" x 1" vinyl coated hardware cloth?
Same question.
This would solve so many of my issues lol any chance you'll sell me 2?
Thanks for the videos and how tos! You're an excellent resource!
Thanks, sorry I can't ship the cages. They are easy to build, give it a try.
@@CoturnixCorner they are! I built your other cages too! You're a great teacher! Where is the best place to buy the wire? Just enough for 2 ish cages?
How many inches between the cage floor and the manure tray? I would appreciate the answer, so my husband can build the cage for me, THANK YOU!
Mine are 6”
Nice job! QUESTION
My wife bought a bunch of 1/4x1/4 hardware cloth, is it possible to use this wire for cage construction, or does it have to be the 1"x1/2"??
The ¼" mesh is great for babies up to about a week old but after that the poop doesn't fall through and gets caked up.
1/4" is too small, you will have issues with the manure building up. Either 1/2" or 1/2" x 1' is your best choice.
What gauge is the wire?
Do you ever sell any cages
Wish you would consider making and selling these
I went to tractor supply. They don't carry the 1 inch x 2 inch mesh coated wire cloth. Neither does Home Depot. Where can I get it? Thank you for the videos.
You can order from Fencerwire.com or on Amazon from the same company.
Academy fence, in NJ. Freight might be more than buying local ?
Why did you use the smaller wire on the back as well?
By bending the floor up for the back it strengthens the floor. Also, I put a small brace in the front to stiffen up the front of the cage.
What size wire is the bottom and everything else? Is bottom 1/2x1/2?
the bottom is 1/2 X 1"
Would you recommend making them an inch shorter so that you could make the stand hold 4?
It would be easier to just make the stand a little taller. I don't like the bottom cage too low to the ground, I have a hard time standing back up. LOL
I understand. I'm 6 ft tall so it's hard to bend down but wanted to make the most out of my small space.
I would like to get started with Qual but i don't know where to buy eggs or young Birds.
Contact Michael from Southwest Gamebirds. southwestgamebirds.com
I ordered 120 jumbo browns from them. Hatch rate was fantastic. 94 birds hatched out.
Also have an order in to MyShire farms.
How many quail can you put in the cage comfortable?
Terry answered this already in another comment, he said 10-12 quail. However, this is the math for 3 per ft² for maximum:
Dimensions 36x20 = 720 in / 144 in (12x12in = 1ft²) = 5ft² x 3 per quail per 1ft² = [Max 15 quail @ 3 per ft²]
Where do you find the j-clips
Ace hardware should be local but Amazon has them to order
I get mine from tractor supply in the rabbit section.
What size J-feeder do you use? 9.5", 11.5" or ????
11.5 in one video.
Any suggestions on where to buy the J feeders? I’ve googled it but would rather go with a recommendation.
How many quail fit in this cage 1 male 5 female?
Up to 18 birds total.
How many grow outs will you put on that size cage?
I currently have 25 3 week olds in each cage.
@@CoturnixCorner how long will they grow there
@@jenjabba6210 up to 8 weeks.
Could a Raccoon get into these if I build a frame and put them outside?
Hearing protection, eye protection, and gloves are suggested for safety reasons. Safety First - a quil isn't worth your eye sight, hearing or loss of a finger.
OSHA in da house!!
New subscriber here.
North central Florida.
Not OSHA.
Binge watching all the videos.
Used those cutoff wheels for years, no incidents. Wife encouraged me to start using the face shield I bought her for weed eating. Started using that along with gloves. Just last month, cutting a small project, with safety gear intact, the wheel popped in half and went flying across my workshop, embedding in my peg board. Just a reminder, they don’t make things like they use to…. 😉Looking for a good leather apron now. God bless that woman. ❤