Volvo Instrument Cluster / DIM Removal Procedure for V70, XC70, S60, S80, XC90

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 ก.ค. 2014
  • Welcome to XeMODeX. Today we're featuring a step-by-step tutorial on how to safely remove your Instrument Cluster / DIM from your Volvo S60, V70, S80, XC70, XC90, etc.
    For more tech tips, and to see a full list of our products and services, please visit www.xemodex.com.
    Note: for customers with S80 or XC90, there are two extra screws on the DIM surround trim that require removal before proceeding to extract the cluster from the vehicle.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 99

  • @smiIingman
    @smiIingman 4 ปีที่แล้ว +5

    Wow...I did NOT think it would be that easy to remove the gauge cluster.
    Thanks for the very well made guide!

  • @AstroDK
    @AstroDK 2 ปีที่แล้ว +4

    Just installed a xemodex pre programmed instrument cluster for my 2004 xc70. The installation process was simple and the cluster so far as been working amazing. Finally I can see how much gas I have!

    • @jordynpenn7746
      @jordynpenn7746 8 หลายเดือนก่อน

      How much was it for the part?

  • @reallyhappenings5597
    @reallyhappenings5597 5 ปีที่แล้ว

    I like what xemodex is doing,, makes long term ownership of tgese computerized cars much more manageable

  • @jplangbehn
    @jplangbehn 7 หลายเดือนก่อน

    OMG thank you for making my life better and EASIER !!

  • @TechmasterBill
    @TechmasterBill 7 ปีที่แล้ว +3

    I just installed one of your DIMs in my 2003 S60 T5 and it was so easy! As soon as I turned the key it sprang to life and acquired the mileage. I do have the SRS warning message, but I have a Dice unit and a laptop that I can use to reset it. Great product that saved me at least $1k over a new unit from the stealership.

    • @XemodexInc
      @XemodexInc  7 ปีที่แล้ว

      Thanks for the review, William! We are happy to help. If you have any further questions please do not hesitate to contact us again.

  • @depannaschjung
    @depannaschjung 7 หลายเดือนก่อน

    Hey this video is very helpful!! Now I have to find out how I can repair the clock. There is nothing at the display on the clock.
    Thanks so much❤

  • @evanelliott7787
    @evanelliott7787 ปีที่แล้ว

    Once again a great video from xemodex thank you so much

  • @fieldmyestas6184
    @fieldmyestas6184 6 ปีที่แล้ว +1

    changed my (DIM) while watching your video thanks very useful! now onto the ignition coils haha

    • @XemodexInc
      @XemodexInc  6 ปีที่แล้ว +1

      You're welcome! Thanks for watching our video.

  • @ShanntahnPininchula
    @ShanntahnPininchula 4 ปีที่แล้ว +1

    Wow, thank you so much! I just removed mine and it was easy thanks to you. God Bless!

  • @hobbybymyself870
    @hobbybymyself870 4 ปีที่แล้ว

    you are a hero my friend :) great job!

    • @XemodexInc
      @XemodexInc  4 ปีที่แล้ว

      Glad it was helpful!

  • @tiimtahma6531
    @tiimtahma6531 9 ปีที่แล้ว +4

    Thank You for good video :)

  • @mrwilfredmyers7566
    @mrwilfredmyers7566 3 ปีที่แล้ว +1

    Thank you for your helpfull video. Those bits of plastic are so fagile. Especialy over time.

    • @XemodexInc
      @XemodexInc  2 ปีที่แล้ว

      Yes, especially with these older cars that are 15+ years old. Thanks for watching!

  • @irishwristwatch2487
    @irishwristwatch2487 4 ปีที่แล้ว +1

    Just wanna say a huge thank you for being the exact video I needed!

    • @XemodexInc
      @XemodexInc  4 ปีที่แล้ว

      You're welcome, Liam!

  • @suffolkngood
    @suffolkngood 2 ปีที่แล้ว

    Hi XeMODex.
    Thanks for a great instructive video.
    Can I just ask why do you not recommend driving the vehicle without the module in place ?
    I have a sat nav to show my speed whilst it will be repaired.

  • @Visionery1
    @Visionery1 2 ปีที่แล้ว

    Great video! It looks like replacing the transparent cover on the binnacle is also straightforward, mine is dusty or has hairline cracks, it all seems to be on the inside. Would this be the same basic procedure on a 2010 XC90 3.2?

  • @BB-ug1ch
    @BB-ug1ch 2 ปีที่แล้ว

    That was great !

  • @chippyandscratchy
    @chippyandscratchy 7 ปีที่แล้ว

    well done thanks

  • @asdfghjklmnbvcxz427
    @asdfghjklmnbvcxz427 3 ปีที่แล้ว +1

    I love volvo

  • @rolle6515
    @rolle6515 3 ปีที่แล้ว

    Thx for the video! :)

    • @XemodexInc
      @XemodexInc  2 ปีที่แล้ว

      You're welcome. Thanks for watching!

  • @felixfast4ward
    @felixfast4ward ปีที่แล้ว

    Thank you ~~~~

  • @petermyxa3409
    @petermyxa3409 3 ปีที่แล้ว

    THANK YOU !!!

    • @XemodexInc
      @XemodexInc  3 ปีที่แล้ว

      You're welcome, Peter!

  • @felixfast4ward
    @felixfast4ward ปีที่แล้ว

    Thank you ~~~

  • @absolutedynamite4979
    @absolutedynamite4979 3 ปีที่แล้ว

    For those who focused on battery terminal removal, did you remove just the negative cable or both?

  • @auroraarmendariz8281
    @auroraarmendariz8281 5 ปีที่แล้ว

    Can you tell me why are the lights are flashing like on and off , in the message area, mileage and motor lights?

  • @krisr1885
    @krisr1885 2 ปีที่แล้ว +1

    Should you unplug the battery before doing this?

  • @JeffersonMartinSynfluent
    @JeffersonMartinSynfluent 6 ปีที่แล้ว +1

    Don't forget to hide the car keys in another zip code so you won't accidentally turn on the ignition which leaves some nasty error codes only the dealer can clear.

  • @richardmartinez5247
    @richardmartinez5247 6 ปีที่แล้ว

    What if you wanted to repair the DIM yourself and not buy a new one or send it to get repaired. How would you go about it?

  • @davidmokros8590
    @davidmokros8590 5 ปีที่แล้ว +1

    Hi, do you know if i can take facelift (03-07) speedometer in (00-02) model?

  • @XemodexInc
    @XemodexInc  10 ปีที่แล้ว +2

    This quick video demonstrates how to remove the Instrument Cluster (DIM) from your vehicle.
    HOW TO: Instrument Cluster / DIM Removal Procedure for V70, XC70, S60, S80, XC90
    #techtips #volvo #volvolove

    • @EDHBlvd
      @EDHBlvd 9 ปีที่แล้ว +1

      Thank you for posting this! Exactly what I needed to see.

  • @tukitukiteteo4239
    @tukitukiteteo4239 ปีที่แล้ว

    hello friend how are you I have a volvo v70xc 2004 in the instrument panel it turns on the lights from time to time that is to say sometimes when connecting the switch I would like to know if replacing the instrument panel as in your video I solve this problem

  • @rickypyun
    @rickypyun หลายเดือนก่อน

    I have spots on the plexiglass screen covering the instrument cluster. I have C70. I tried speaking the outside of the screen but they won't come off. Could it be on the inside of the screen? How could I remove just the screen and clean it?

  • @baldyslapnut.
    @baldyslapnut. 11 หลายเดือนก่อน

    400k miles and rising. Testament to Volvo engineering.

  • @RennaeFord
    @RennaeFord 7 ปีที่แล้ว

    my husband installed a cluster board in his 02 Volvo V70. The car was reading 87,000. Now its showing 200,000. How do he fix this issue?

  • @AxisDSTC
    @AxisDSTC 7 ปีที่แล้ว

    Hello, I have a volvo v70 year 2005. If I swap the DIM from a used volvo of the same year model, would I have to program it at a volvo shop or such? Nice video and thanks!

    • @XemodexInc
      @XemodexInc  7 ปีที่แล้ว +1

      Hi AxisDSTC. I spoke to our tech and he said it depends on the software inside of the used module. There is no way to tell if the module is compatible from the outside, even if the stickers match. The software inside the module could be different. He suggests that you get your existing module repaired instead.

    • @AxisDSTC
      @AxisDSTC 7 ปีที่แล้ว

      XeMODeX Inc thanks alot for the quick answer!!

  • @michaelduncan5948
    @michaelduncan5948 3 ปีที่แล้ว

    Hi great video, I have a late 2002 V70 D5, with the cluster all blacked out, I am looking to get a used dash cluster could you tell me what V70s are the same dash cluster? is it any V70 D5 from 2002 to 2006? thanks

    • @XemodexInc
      @XemodexInc  3 ปีที่แล้ว

      Hi Michael. If you're looking for a used cluster, make sure that the hardware number and part number matches the cluster from your vehicle. The module also contains programming specific to your vehicle. Before you install the used cluster into your car, take it to a shop that can program the cluster for you. Otherwise the used cluster will still have the mileage from the original vehicle. If you have any further questions about our instrument cluster repair services, you can contact us by email or visit our website xemodex.com.

  • @vicentepallamare2608
    @vicentepallamare2608 11 หลายเดือนก่อน

    Can I see the dim part number without removing it?

  • @Midorireed
    @Midorireed 8 ปีที่แล้ว +1

    I have a 2003 xc90 that the dealer said I need a new dash for $1400 I found one on eBay for $99 if I follow your directions I should be okay? To back track my dash would flash the srs bag maintaince warning and then my gages would go all the way to the left then the dash would cut out. Is a new cluster unit what I need? TIA

    • @XemodexInc
      @XemodexInc  8 ปีที่แล้ว

      Yes is seems like you do need a DIM (as long as you are not losing any other functions in the vehicle at the same time). We do offer a repair service for your DIM. You can contact us toll-free at 1-888-712-2525 and ask to speak with our tech support. Thank you.

  • @jtsatman1
    @jtsatman1 8 ปีที่แล้ว +1

    Hello I have a 2002 Volvo XC70 that the Dim only shows the service engine light. is there a fix for this?

    • @XemodexInc
      @XemodexInc  8 ปีที่แล้ว +1

      Hi Joe. Our tech said to check the fuse on the side of your dash for the DIM. If it's OK then you should contact us to send your DIM in for repair. You may contact us toll-free at 1-888-712-2525. Thank you.

  • @HomeschoolGamers
    @HomeschoolGamers 4 ปีที่แล้ว

    My fuel gauge has stopped working and the SRS is on. Would picking up a new cluster (from autowrecker) work?

    • @XemodexInc
      @XemodexInc  4 ปีที่แล้ว

      Hello. Please contact us to speak to our tech so we can help you diagnose your vehicle over the phone. You may contact us toll-free at 1-888-712-2525 or visit xemodex.com.

  • @karlagarcia48
    @karlagarcia48 7 ปีที่แล้ว

    I have the same problem on my volvo s60 however my car is also not driving regularly. it takes a lot of acceleration to move just a few inches. is that a whole different issue?

    • @XemodexInc
      @XemodexInc  7 ปีที่แล้ว

      Hi Karla. I spoke to our tech and he said that the DIM is on the low speed CANbus network. This generally should not hinder the car's engine performance which is on a separate network. He said that it could also be a separate CEM issue, but he needs a copy of the diagnostic trouble codes report (DTC) from your vehicle to be sure. Please send an email to info@xemodex.com with your vehicle information, VIN number, symptoms your vehicle is experiencing, as well as a copy of the DTC report. Our tech support will reply to your email and help determine the issue. Thank you!

  • @sharonkirven9570
    @sharonkirven9570 6 ปีที่แล้ว

    Hello, I ran across your video by putting in the youtube Search, (1998 S70 VOLVO needles not working).. Last August I purchased a 1998 S70 Non turbo Volvo 2.4 , the following has never worked and I've called this car my Great lil fixer upper from day 1. I actually just Love this Particular Volvo Model. Now the Problem is My cluster does nothing other than the lights lighting up and the check engine and service engine lights etc. Now when i say it does nothing, I'm talking about the Needles, meaning i get NO rpm, fuel, hot, oil, etc. readings from the cluster. I only know its time to get fuel when the fuel light comes on. Please advise what I should do to get my needles working.. Can I buy another cluster all together or do you have the info where id go purchase a new one, or would one from the salvage yard work.. HELP Im at a lost here. A Sincere Thanks In Advance!!

    • @XemodexInc
      @XemodexInc  6 ปีที่แล้ว

      Hi Sharon, please contact us directly to speak to our tech specialist regarding your vehicle diagnosis. Call us toll-free at 1-888-712-2525 (US & Canada) or email us info(at)xemodex.com. Thank you.

  • @Miranda-bs4xc
    @Miranda-bs4xc 6 ปีที่แล้ว

    I have gotten new clusters for a 2002 Volvo S80 and it still won’t work at all. The gauages won’t move and the lights don’t work is there a different problem ?

    • @XemodexInc
      @XemodexInc  6 ปีที่แล้ว

      Hi Miranda, we would need more information about your vehicle to determine your issue. Please contact us toll-free at 1-888-712-2525 (US & Canada) or email us info@xemodex.com. Thank you.

  • @Jmoney-db4rp
    @Jmoney-db4rp 7 ปีที่แล้ว

    Thanks for the video. I had a little over 100k miles on my Volvo I order one from eBay and it says 200k! How can I make it go back to the original miles ? Is there a way. Crap

    • @XemodexInc
      @XemodexInc  7 ปีที่แล้ว

      Hi Jose. I spoke to our tech and he suggests removing the used DIM and plugging your original DIM back into your vehicle. See if the mileage goes back to the original 100k. If it does, then just get your original module repaired. To check the mileage on your vehicle, go to your local Volvo shop that has access to VIDA. Ask them to scan your CEM to see what mileage is stored on the module. You have to be careful when you buy used DIM off of ebay, especially if the used DIM has higher mileage than your original module. You will risk programming your CEM to the higher mileage stored from the used DIM. This is why our tech suggests repairing your original unit.

    • @Bacon91
      @Bacon91 4 ปีที่แล้ว

      XeMODeX Inc what would it take to repair the current DIM? My error code screen works only intermittently.

  • @sydneyflanders8504
    @sydneyflanders8504 7 ปีที่แล้ว

    I removed it but I can't find the answer to this: Can I still drive it while the cluster is out? And if so, will the correct mileage still accumulate?

    • @XemodexInc
      @XemodexInc  7 ปีที่แล้ว

      Hi Sydney. We do not recommend driving your vehicle without first reinstalling your cluster. Thank you.

  • @shaquillebrown5989
    @shaquillebrown5989 8 ปีที่แล้ว

    mine doesn't do anything, it doesn't work at all.. can I buy a replacement off of eBay or do I have to send in the one I have to be repaired? if i have to send it in to be repaired will I be able to drive my car without it?

    • @XemodexInc
      @XemodexInc  8 ปีที่แล้ว

      Hi Keea. We do not recommend that you drive your vehicle without your instrument cluster installed. We offer a number of services for the Volvo instrument cluster. Please contact us toll-free at 1-888-712-2525 and ask to speak to our technical support. They will help diagnose your vehicle and find a solution. Sometimes it may be another module interfering in the network, depending on the symptoms.

  • @rahulforworld
    @rahulforworld 8 ปีที่แล้ว

    At first my 2003 Volvo S60 was showing airbag warning and then all DIM lights and indicators went off. I was not sure if it was DIM problem but I replaced my old DIM Instrument cluster with new one but lights and indicators are not working yet.

    • @XemodexInc
      @XemodexInc  8 ปีที่แล้ว

      Hi rahulforworld. Our tech said you should try a hard reset on the battery to see if you can get communication. If you have any further questions, give us a call toll-free at 1-888-712-2525 and ask to speak to our tech specialist. Hope this helps!

    • @rahulforworld
      @rahulforworld 8 ปีที่แล้ว

      Thanks for your response... Actually I tried another instrument cluster and now Light and meters are working good, but my actual mileage was 135k, and went up to 146k and airbag service warning is there. I think, New instrument cluster took the another car's reading from where it came. Any suggestion please how to remove the SRS airbag warning message and fix the mileage as it was before.

    • @XemodexInc
      @XemodexInc  8 ปีที่แล้ว

      You will need to take the vehicle to the dealership or to a specialty repair shop to get diagnosed and reset.

  • @MrLeigion
    @MrLeigion 9 ปีที่แล้ว +1

    So I don't need to get anything reprogrammed to replace the DIM?

    • @XemodexInc
      @XemodexInc  9 ปีที่แล้ว +1

      Onyx Leigion Hi Onyx! Whether you choose to repair your DIM with us or buy a preprogrammed unit from stock, they are both plug and play. No software reload required! Thanks.

  • @ricanbee2849
    @ricanbee2849 3 ปีที่แล้ว +1

    What does it mean if the miles doesn’t go back to the right number

    • @XemodexInc
      @XemodexInc  3 ปีที่แล้ว

      Hi Rican! The miles from your vehicle are saved in the Driver Information Module as well as the Central Electronic Module. That is why we do not recommend installing a used DIM into your Volvo unless it has the correct programming for your vehicle.

  • @Callemout997
    @Callemout997 6 ปีที่แล้ว

    How much to repair my original unit ..03 Volvo xc 90 ??goes off and on shows the warning lights ten sometimes completely goes out

    • @XemodexInc
      @XemodexInc  6 ปีที่แล้ว

      Hi Dave. Our pricing for DIM repair is listed on our website, please visit www.xemodex.com for more information. You can also contact us toll-free at 1-888-712-2525 (US & Canada) or email us info@xemodex.com. Thank you.

    • @XemodexInc
      @XemodexInc  6 ปีที่แล้ว

      Hi Dave, please contact us directly to speak to our sales department regarding costs for our repair service. Call us toll-free at 1-888-712-2525 (US & Canada) or email us info(at)xemodex.com. Thank you.

  • @ookerbaba
    @ookerbaba 8 ปีที่แล้ว +2

    2004 S80 has two hidden screws holding the bezel on! Do not try to pry this off!

    • @XemodexInc
      @XemodexInc  8 ปีที่แล้ว

      Hi Carl. Thank you for your comment. This was mentioned in the video description at the top of the page. For customers with S80 or XC90, there are two extra screws on the DIM surround trim that require removal before proceeding to extract the cluster from the vehicle.

    • @ookerbaba
      @ookerbaba 8 ปีที่แล้ว +1

      We missed it but your support has been great! Thank you.

  • @LilReynolds77
    @LilReynolds77 8 ปีที่แล้ว

    If I buy an used DIM elsewhere, would I then need to get it reprogrammed?

    • @XemodexInc
      @XemodexInc  8 ปีที่แล้ว

      Hi Corey. Yes, you will need to get it reprogrammed. We do offer a cloning service for most Volvo DIM if you are interested. We would transfer the programming from your original unit onto the used unit that you provide us. If you have any further questions you may contact us toll-free at 1-888-712-2525. Thank you.

  • @pajen19971997
    @pajen19971997 7 ปีที่แล้ว

    Hello i know this video is old but i wanted to ask you if you can change the instument cluster from a volvo v70 2009 to a instrument cluster on a volvo v70 2015, if it is the same plugins and if they would line up the same way ( if they fit correct) and also if all the lights and led and stuff that are in the 2015 cluster would work on my 2009 volvo v70 if i change.. Thanks !

    • @XemodexInc
      @XemodexInc  7 ปีที่แล้ว

      Hi Isak. I spoke to our tech and he said it is not possible to use a cluster from a 2015 model for a 2009 model. The plugs and functions are different in the newer clusters.

    • @pajen19971997
      @pajen19971997 7 ปีที่แล้ว

      okej thank you for answering !

  • @freshsolis8739
    @freshsolis8739 2 ปีที่แล้ว

    Do the miles stay the same?

  • @CroatianJan97
    @CroatianJan97 7 ปีที่แล้ว

    Hello,
    important Question;
    How did you manage to get the R-Design Badge at you steering wheel?

    • @XemodexInc
      @XemodexInc  7 ปีที่แล้ว +1

      Hi Jan. I asked our tech and he said you would have to swap your current steering wheel with a sport steering wheel that fits your model. Or you could buy an R badge from eBay and apply it to your current steering wheel.

    • @CroatianJan97
      @CroatianJan97 7 ปีที่แล้ว

      Yes, can you send me the link for the R Badge.
      Searched for years and couldnt find it..
      THANKS!!

  • @cyanur6791
    @cyanur6791 4 ปีที่แล้ว

    No s 40 😢

  • @justchill135
    @justchill135 3 ปีที่แล้ว +1

    Forcing the corn? Hmm I didn't realize I needed to use corn to remove my
    dash.

  • @justchill135
    @justchill135 3 ปีที่แล้ว

    Make sure you only use a toonie. I didnt realize and my loonie actual created an electric reaction and fried my cluster.