Beretta 1301 Competition Review
ฝัง
- เผยแพร่เมื่อ 3 ก.ค. 2024
- My review of the Beretta 1301 Competition. 12 gauge, 3" shells, 24" barrel.
00:00 Introduction
4:12 Disassembly:
5:12 Slow motion
7:31 How to Ghost load the Beretta 1301
8:10 Included Accessories
Article Review with high def pictures: www.huntinggearguy.com/shotgun...
Great review, thanks. I've had my eye on one of these for a while.
Great review sir!
You earn a subscriber with a good review. Keep doing it good job
Really good review, subscribed!
Good review. I use this 1301 Comp for 3 gun. Only complaint is it double feeds RIO metric shells. Loves winchester cheap stuff and everything else. I think the dilemma for the RIO (.5mm rim diameter difference from standard) is caused by the fact I have a Briley extension tube that makes the capacity 11+1, which increased spring tension on the shell stop.
Very good review
Looking to get the stoeger for duck hunting. Excited for the review!
+ben beau Here ya go! th-cam.com/video/T3hLXkUjiLU/w-d-xo.html
Hi Adriel. I have a quick question. On the receiver of my 1301 comp(24" barrel), I have four plastic plugs. How do I remove them to install a rail?
Very good review. There's another video by MrGunslinger on TH-cam mentioning a fatal flaw of this shotgun..some double feed after one hits the button on the right...can you, please, address that in another video?
Thanks.
If you were to hit the back of that button, sure because the button is connected to the shell latch. Some other semi auto shotguns are designed the same way, makes it handy for unloading at the end of your run because you can push the latch up and pull rounds straight out of the tube using the back of the bolt release button.
Nice shotgun...
Very nice gun but an expensive gun too. I am very jealous sir.
I’m having an issue with mine. I can’t load more than 2 rounds in the magazine tube. Should hold 5 but I can’t get the third in there. Any suggestions?
There's probably a plastic plug in there so you can hunt waterfowl (2 in tube + 1 in chamber for waterfowl). Just unscrew the cap at the end of the tube and there's probably a plastic stick there.
The Hunting Gear Guy you are correct. Thank you very much. I just installed a lancer 5+ tube extension and found that plastic stick inside
What barrel length would you recommend for someone new to 3 gun?
I really like 24" but you can make do with any length as long as it has interchangeable chokes.
Can you put on a mag +2 or +3extension for 3 gun in Canada??
www.huntinggearguy.com/tips/maximum-shotshell-capacity-canada/
Wow a whole +3? Watch out
can you ghost load the 1301 comp?
Yes. Skip ahead to about 7:30 to watch him do it
I really want to like this shotgun, but the ability to jam up the gun by dropping more shells than needed or when you didn't want them, kills it for a home defense shotgun for me. This will, however, be amazing for hunting and skeet.
Yeoman Archer aridus industries makes a aluminum button for 60$ which prevents that feature from being used thus eliminating the flaw making it able to be reliably counted on for a variety of uses.
can take other chokes *, * * , * * *,* * * * ???
Yes, the 1301 competition takes interchangeable chokes. Beretta Optima HP style
What is the price?
They're around $1300-1500
You kinda glossed-over the fact that the mid-barrel bead fell off, but that's a real red flag to manufacturing issues for me. For a +$1,200 shotgun, that's completely unacceptable.
It could be just hard use. Maybe they caught it on something. Maybe he glossed over it, knowing he caused himself?
They screwed up by not moving the serial number. That port isnt open near enough.
I wonder how hard it is to re-stamp the serial number and if it's legal in Canada.
The Hunting Gear Guy We looked into it down here and there are some provisions for doing it in certain situations, but it relates to old firearms where they are so worn that they have to be re-stamped.
Some people have done it but last I heard the ATF hadn't replied on a request for info on it.
Up there i have no idea at all.
The Hunting Gear Guy I talked to our match director for our 3-Gun. He worked for Beretta up until about 6 months ago. I asked him about the SN# and he said that the they moved it on the newer ones.
They changed it on the Gen 2 I just ordered today.
They open it up right up to the serial numbers. Mine quad loads like a champ
is not fiber optic
The switch on the outside of the receiver is for breech loading when empty. In this way you can load lefty, a single round, and begin loading the magazine while hot.........inaccurate review. should have read the manual.
I get you used dummy shells and THAT'S what was in their but your safety was off the whole time...... some would say unsafe.. lol