You, Steve, and the other FrSky reviewers need to put their product through the paces, let you collaborate writing the manual and communicate what is needed on firmware and GUI!
When will FrSky release product with fully prepared firmware, manual, and working like such? I loved my S6R in a Corsair, and the R9 STAB in a Ranger 1600. But both crashed when I didn't disengage the setup switch which I engaged by accident in flight. The R9 Stab did an uncontrolled full throttle ripping the motor from the plastic mount of the Ranger and nearly getting me. I found a cap had fallen off one of the pcb inside the case. Nowadays I am sure it is easier and cheaper to put a SpeedyBee FC and an ELRS rcvr and setting it up to whatever level wanted.
Question: In the SRX Stable LUA script, what "Mounting Type" should be selected if the receiver is mounted inverted, but otherwise as shown in the manual? Had my first flight today using a TW SR8 and had some problems even though it was calibrated and did the self-check.
@@AndrewNewton Just to close the loop on this. FrSky Ben gave me the answer, that yes, "Horizontal Reversed" does in fact mean inverted. It's poorly worded and/or documented.
I bought all these FrSky bits plus more that I was gong to fit in a glider. The instructions etc were impossibly complicated for me to understand as nothing seemed to make sense or work as adverised, subsequently all these bits are now in my junk box. The glider is now fitted with a trusted and easy to setup Byme A and a simple SBUS mini reciever. I consoled myself with this waste of money by thinking the extra telemetry would have been a distraction
You, Steve, and the other FrSky reviewers need to put their product through the paces, let you collaborate writing the manual and communicate what is needed on firmware and GUI!
Yes their instructions, website and user interfaces all need improvement. But I'm not volunteering for the job.
You need to be level left to right also, instead of redoing the self-check it has the option in the receiver to adjust the flight trim.
When will FrSky release product with fully prepared firmware, manual, and working like such? I loved my S6R in a Corsair, and the R9 STAB in a Ranger 1600. But both crashed when I didn't disengage the setup switch which I engaged by accident in flight. The R9 Stab did an uncontrolled full throttle ripping the motor from the plastic mount of the Ranger and nearly getting me. I found a cap had fallen off one of the pcb inside the case. Nowadays I am sure it is easier and cheaper to put a SpeedyBee FC and an ELRS rcvr and setting it up to whatever level wanted.
Not only FrSKY. SpeedyBee had very similar premature-release problems with both Wing boards.
@@AndrewNewton Ah. We are the Beta testers.
Thanks Andrew 👍💪✌
👍🏻
This would be awesome on my spec racing wing especially for those bumpy days!
Oh yeah!
Boa noite meu amigo Andrew, muito bom os seus vídeos, aqui no Brasil são 21:42 horas da noite!
Good evening Brasil!
We would like to see how the knife edge and hover modes work, please. 😊
Bet you do!
Where did you get the gimbal boots?
3d printed. I'll add them to my Thingiverse and post the link
www.thingiverse.com/thing:6771450
@@AndrewNewton AWESOME!! Thanks!
Thank you!
Welcome!
Question: In the SRX Stable LUA script, what "Mounting Type" should be selected if the receiver is mounted inverted, but otherwise as shown in the manual? Had my first flight today using a TW SR8 and had some problems even though it was calibrated and did the self-check.
Don't know. Ask Ethos FrSKY facebook group facebook.com/groups/324132953138607
@@AndrewNewton Just to close the loop on this. FrSky Ben gave me the answer, that yes, "Horizontal Reversed" does in fact mean inverted. It's poorly worded and/or documented.
@@TheBigChinoDon Excellent, they are quite helpful at FrSKY
I bought all these FrSky bits plus more that I was gong to fit in a glider. The instructions etc were impossibly complicated for me to understand as nothing seemed to make sense or work as adverised, subsequently all these bits are now in my junk box. The glider is now fitted with a trusted and easy to setup Byme A and a simple SBUS mini reciever. I consoled myself with this waste of money by thinking the extra telemetry would have been a distraction
Yes there is a steep learning curve. Glad the simple FC works for you.