Xiaomi Redmi Note 4X Battery Replacement
ฝัง
- เผยแพร่เมื่อ 7 พ.ค. 2018
- A Battery Replacement on a Xiaomi redmi note 4X
If you are having trouble finding a decent battery to replace yours with, i would recommend
Nohon's Note 4X Battery: s.click.aliexpress.com/e/c49gXrpI
Shipping is a bit of await, took about 2 weeks from China to Australia
=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Tools that i use frequently that are Ali-express Affiliate linked
CPB Heat pad: s.click.aliexpress.com/e/68nLSbQ
This is the Blue Pad i always have on my videos usually set at 60 Oc
I use this to soften adhesive on mobile devices.
Heat Resistant Tape: s.click.aliexpress.com/e/dQ283f6
When using the heat gun near sensitive parts, its best to cover them
With this to protect them
Double Sided Black Tape: s.click.aliexpress.com/e/bO46kXwg
The usual tape i use on most repairs, on screens
Red Clear Tape: s.click.aliexpress.com/e/cK4DNmIU
For things that need more Stick!,usually on tablet digitizers
Phone Repair Tool Kit: s.click.aliexpress.com/e/bH1lqUe4
A Similar tool kit to mine, that i use for those random screws that you dont normally see
Hakko FX 951 Clone Station: s.click.aliexpress.com/e/b5YamiMs
My Soldering Station i use, so far it has been good
Quick 861DW Hot Air Station: s.click.aliexpress.com/e/bAdNJvNI
This was a purchase to learn a bit more in micro soldering
So far it has been a great purchase
Power Z USB Amp Tester: s.click.aliexpress.com/e/TlwI4w8
Advanced readouts of power draw on devices
Basic USB Amp Tester: s.click.aliexpress.com/e/cUjjwpDW
A Simple Amp tester to see if your charger is actually putting out power
Black Tweezers Set: s.click.aliexpress.com/e/I80EZbE
The Black Tweezers i use in my videos
Metal Pry Tool :s.click.aliexpress.com/e/ckqD1TNQ
This is the same as the metal pry tool i use, different brand printed on it
Pry Tool: s.click.aliexpress.com/e/y0dvtNW
A New Version of the pry tools
Basic Digital Microscope: s.click.aliexpress.com/e/beN6u068
This is the kit i purchased to do micro soldering, if you see a video
of me micro soldering it was captured on this cameras feed
Orico 120w 10 Port Charging Station: s.click.aliexpress.com/e/miqk2Le
The Charging station i use out the back, usually having multiple devices connected
Doesn't support Fast charging but still does a good job
One page i go to when I'm curious what new repair tools is Wozniak Store: s.click.aliexpress.com/e/9eDP9uy
The Gold and Black Iphone 4s Screw Mats Im using 90% of the time
s.click.aliexpress.com/e/mg7GyLA - วิทยาศาสตร์และเทคโนโลยี
![[안방1열 직캠4K] 베이비몬스터 치키타 'FOREVER' (BABYMONSTER CHIQUITA FanCam) @SBS Inkigayo 2404707](http://i.ytimg.com/vi/Tn3bGHiBWkg/mqdefault.jpg)
Thanks... Successfully replace the battery thanks to your video
Thank you for this video. I'm gonna change my battery tomorrow.
BN41 battery model compatible on Redmi Note 4X ? or I should buy the BN43?
Do you need to have new glue for the battery? I thought with the screws and back casing would keep the battery secured.
a little bit of double sided take should do the job fine and stop it from rattling around inside the phone
I suspect the battery on my old xiaomi is dead after it fell into water months ago. It gets to the charging screen but the battery doesn't gain any charge. Do you think this would be doable for someone who's never repaired a phone before? It looks pretty easy in the video, but that might just be because you know what you're doing. I'd appreciate if you could tell me if this is a stupid idea haha
If you think of the repair as basically.
The phone is dead now, if I fail the repair then it's still dead.
I would attempt to open it, prior to ordering the battery.
So if it does go bad you haven't spent much or any money
hhhhhhmmmm why did the customer not get you to put a new back on it while there cheap as chips lol good video do looked at a other vid and they pulled the logic board and 90 % of the phone to bits lol you sir earned a sub
Great! Thank you!
Your welcome
BN43
I have successfully taken off the cover of RN4X which won't charge. Mi logo appears it vibrates and goes off then Mi logo appears and it repeats cycle while charger is plugged. The battery inside is BN41 and NOT BN43. It is definitely a Redmi Note 4X. Are the two batteries interchangeable? I think I should replace with BN41 though everywhere it says BN43 for Redmi Note 4X.
i dont know if they are interchangeable sorry
Is it necessary to remove the fingerprint sensor? Other videos they don't remove the fingerprint sensor.
For me it was
does the RN4x 4/64 and 3/32 are same battery?? hope you see my comment
i believe it would be the same battery
the RN4 and the RN4X have different batterys tho
What is that tape you use on battery the white one
4:25
thanks for the time stamp, that is just some generic double sided tape, anything will do
do you need to unscrew the bottom.part?
Once inside, no
Hope you know, after charging my redmi note 4 for a couple of hours I went ahead to turn it on, I saw the ....mi... Logo on the screen, then it went completely black. Right now it just will not turn on and when connected to charge a red flashing light comes on. Any idea how to fix this problem or might battery replacement will fix it? Thanks.
First thing I would do is swap it back to the original battery from the phone and see how it goes from there
@@rickstechrepairs thanks for reply. I have not changed the battery yet. I have seen videos claiming to correct this condition but none have resulted positive after trying. That's why I thought about the battery replacement option.
does fast boot mode or recovery mode able to be booted?
@@rickstechrepairs no... It does not do anything. Only a red flashing light when connected to charger. when not connected there is no light, it's what I think people refer as bricked phone.
I wouldn't quite go that far to say it's bricked, but isn't a promising sign
Was the phone also getting hot while charging prior to it failing
Is the battery glue really that necessary?
If you are happy to have a battery flapping around in your phone - no it's not.
Otherwise, yes I would use it
What is the name of screw driver your using?
pentalob for the bottom screws,
000 phillips screw driver for everything else
@@rickstechrepairs thanks
i do it and when i put a charger to my phone it start red flashing what do i do wrong?
I would be thinking the new battery is a dud
@@rickstechrepairs okay thanks for the response
Where do i buy good battery for redmi 4x
www.aliexpress.com/item/1005005408058409.html?spm=a2g0o.productlist.main.5.31ed65cdsVkOcd&algo_pvid=60d64a4f-2a8d-4247-82a7-42829967a6e3&aem_p4p_detail=202310172115263036965080463200003611853&algo_exp_id=60d64a4f-2a8d-4247-82a7-42829967a6e3-2&pdp_npi=4%40dis%21AUD%2129.68%2117.51%21%21%21136.00%21%21%402101ea8c16976025262493089e8259%2112000032958027965%21sea%21AU%21766477670%21&curPageLogUid=PCtCsHJzVYcZ&search_p4p_id=202310172115263036965080463200003611853_3
is the battery BN42? hope you answer.
Battery for the 4x is BN43
mediatek or snapdragon?
4x is the Snapdragon model
@@rickstechrepairs oh, i see because the battery of the mtk variant is different
i tried this and cracked my screen :(
sorry to hear that
omg
OH sorry