Hello Sir.... Thanks again for your time. You made such a wonderful tutorial. I use to wait every day. Sir plz make one video for Foundation work like footing... and on REVIT STRUCTURE. Thank you sir.
Copy from this Tutorial: th-cam.com/video/mqpWpcDvt7A/w-d-xo.html Worth watching the original since the author actually understands the maths behind the family. Copy/pasting material from other people and not giving them credit is not very ethical.
Can you please explain the formulas and how did you manage them because it makes me confused? To learn I want to know the way you thought not only the steps, Can you please explain it?
Thanks for the your useful channel, I personally learned lots of things; but the question is(about the two parts videos) „How can we reach to these mathematical formula?“ and it‘s better to say „ Finding an exacted way to reach the formulas is really really difficult“ and what‘s the way. Thanks again ❤
hi, i really love waching your tutorials. can I suggest if you can make a tutorial on how to make a adaptive solar skin. i really need it for my thesis. I hope you would help me. thank you very much.
At 14:27 why didn't you write 0.333 in normalized curve parameter from the start? do you really need to write down the geometric formulas and then write a/h to ger the 0.333?? great tuts by the way
Sir, this video is amazing, thank you. However i got stuck in between, its probably a very petty issue, but being a beginner, a little heads up will be very helpful When you've joined the medians with a spline and made them references, and then placing a point near the intersection of the medians, to which you're applying some parametric constraints so that for a bent surface, the family works. But after placing the point as shown, in the properties palette, there was no Measurement Type option under Dimensions tab, as in your project. I am only getting 'offset' under dimensions. And that's where I'm stuck. Can you please suggest me what to do? Any help would be appreciated. I'm a student of architecture and i want to use such a family in my project
Hi Amazing tutorial, very helpful although I am stuck in a pickle when placing the reference point to where we located the intersecting reference point. My reference point seems to be given a negative/inverted toggle position rather than the standard RGB gumball toggle. I am presented with a blue/orange with the vertical toggle facing down. Can you please help? :)
Hey, I really like watching your channel . I would love to consult whit you. I'm trying to create a brick wall from scratch. That the bricks will stand out. Like stones of a fort or castle for example, to actually create a wall with chiseled stones. Thank you 🌺😄🌺
How do i activate the measurement type of the parametric point as normalized curve parameter? Please help. Whatever i do, when i put a point, it only shows 'offset' under dimensions tab, not Measurement Type..
Hello, I'm trying to model up this facade. I'm having a bit of trouble when I get to the 13 minute mark on the video. The part where you add the parameter value for dimension a. I see yours goes grey and you can't edit it after you enter the formula whereas with mine I can still edit it and it's giving me an error, do you know what might be the problem?
hello sir...How to create Room tag including length x Depth parameters ... There is no direct parameters for Width and Depth of room... revit 2015 shows total area .. i want area in length x width format
Thank you so much please when i want to create a vertical line i can't sat the horizontal plane of the point why and who can I do it ?in my revit 2013.thanks
Hello Sir.... Thanks again for your time. You made such a wonderful tutorial. I use to wait every day. Sir plz make one video for Foundation work like footing... and on REVIT STRUCTURE. Thank you sir.
Hello sir ....... thank you for your time . please make video for calculate work and on Revit structure
I really want to create this in my project..but i just finished my submission xD ...
I dont understand the u grid formula.can anybody explain that?
Greeting from Lome(Togo). Please a tutorial about truss
Copy from this Tutorial:
th-cam.com/video/mqpWpcDvt7A/w-d-xo.html
Worth watching the original since the author actually understands the maths behind the family.
Copy/pasting material from other people and not giving them credit is not very ethical.
Can you please explain the formulas and how did you manage them because it makes me confused? To learn I want to know the way you thought not only the steps, Can you please explain it?
Thanks for the your useful channel, I personally learned lots of things; but the question is(about the two parts videos) „How can we reach to these mathematical formula?“ and it‘s better to say „ Finding an exacted way to reach the formulas is really really difficult“ and what‘s the way. Thanks again ❤
hi, i really love waching your tutorials. can I suggest if you can make a tutorial on how to make a adaptive solar skin. i really need it for my thesis. I hope you would help me. thank you very much.
I am not getting option label dimension in my revit 2016, how to make it as a base parameters. Help please
Part 2 pleasee!!!!! :) This is great! I cant wait to finish on my project
Thanks for all the help! I'm already incorporating it into my work! i hope i get better approvals after learning from your tutorials
At 14:27 why didn't you write 0.333 in normalized curve parameter from the start? do you really need to write down the geometric formulas and then write a/h to ger the 0.333?? great tuts by the way
just one complaint. why couldnt you just set 0.333333??
Love ur channel’s a lot, test it by myself too, so inspiring, always wanna know more about adaptive components
.Interesting Im waiting for the next video
can u explain how can we know which formla we should use
Excellent u r helping alot thsnks!#@
Sir, this video is amazing, thank you. However i got stuck in between, its probably a very petty issue, but being a beginner, a little heads up will be very helpful
When you've joined the medians with a spline and made them references, and then placing a point near the intersection of the medians, to which you're applying some parametric constraints so that for a bent surface, the family works. But after placing the point as shown, in the properties palette, there was no Measurement Type option under Dimensions tab, as in your project. I am only getting 'offset' under dimensions. And that's where I'm stuck. Can you please suggest me what to do?
Any help would be appreciated. I'm a student of architecture and i want to use such a family in my project
Did you ever find the solution for this? I am also getting this issue.
@@OneAsianMonkey yes.place refrence point on the reference line.but dont set the workplane, select by face.
there is some advance shit going on in this video folks..
Hi Amazing tutorial, very helpful although I am stuck in a pickle when placing the reference point to where we located the intersecting reference point. My reference point seems to be given a negative/inverted toggle position rather than the standard RGB gumball toggle. I am presented with a blue/orange with the vertical toggle facing down. Can you please help? :)
How to use it in the facade
Hey,
I really like watching your channel
. I would love to consult whit you. I'm trying to create a brick wall from scratch. That the bricks will stand out. Like stones of a fort or castle for example, to actually create a wall with chiseled stones. Thank you 🌺😄🌺
How to download this facade family?
How do i activate the measurement type of the parametric point as normalized curve parameter? Please help. Whatever i do, when i put a point, it only shows 'offset' under dimensions tab, not Measurement Type..
U are
creative engineer
Thank u sir.Balkan
Hello, I'm trying to model up this facade.
I'm having a bit of trouble when I get to the 13 minute mark on the video. The part where you add the parameter value for dimension a. I see yours goes grey and you can't edit it after you enter the formula whereas with mine I can still edit it and it's giving me an error, do you know what might be the problem?
hello, i'm having the same problem :( can you fixed it?
@@ricardofortiz14 I was unable to fix it, I downloaded the family on revitcity.com
Having same problem, not getting option for dimension to a parameter. Can you please help me
Why you talk so fast. Hard to follow you
tanks sir need full video rivet
This is a very good tutorial, thank you for sharing.
another nice subject. thanks for sharing
Thank you Serbian brother!
hello sir...How to create Room tag including length x Depth parameters ... There is no direct parameters for Width and Depth of room... revit 2015 shows total area .. i want area in length x width format
Thank you so much please when i want to create a vertical line i can't sat the horizontal plane of the point why and who can I do it ?in my revit 2013.thanks
Balkan bhai k is tutorial ny tu halkaan kr dia
i need the library .. where can i found it .. i have metric labrary but i didn t found metric mass into it !!
I like what you do. But don't copy jeremy rosh with tutorials man :D
Make your own :)
I just spent one year trying to learn this facade! But did not like the outcome, i hope your version is better than the other tutorials.
This is getting better. Thank you for the amazing content.
how to open new conceptual mass page..please help me...Thanks
This is going to be good to watch :o
I think this is the most underrated and most powerful tool in Revit for architects
Love ur channel’s a lot , kowing what you are a treasure
There some place that I can download this facade?
THIS IS FOR EINSTEIN ONLY !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
So good
excelente video. gran ejercicio
hey balkan how can i contact u
Thanks for the awesome video
can't wait for the next ☺☺
rendering tutorials ,please 💔
jangar sirah anjiw
Very good
Thank you