It did work, a warning said "mass contains only mesh geometry which can’t be used to compute mass floors volume or surface area". Now sure if that's what the problem is and if it is, how to fix it?
Please make sure to create the panels with the exact steps as shown in the video, also be sure to copy the measurements correctly is you don't you will see that error message
The two sides have to add up to a certain number so if it's saying it's too short you must be entering the number that's supposed to be on the other side of the panel or too small for the family you're making
Please make sure to create the panels with the exact steps as shown in the video, also be sure to copy the measurements correctly is you don't you will see that error message
![[UNCUT]"ตุลามรณะ"ย้อนฟังคำทำนาย หมอดูทุกสาย ดวงเมืองร้อน (หมอปลาย ฟองสนาน อ.โอเล่)I คนดังนั่งเคลียร์](http://i.ytimg.com/vi/lE5az5VvT9M/mqdefault.jpg)
![The Wall Song ร้องข้ามกำแพง | EP.213 | กรีน อัษฎาพร | 3 ต.ค. 67 [1/5]](http://i.ytimg.com/vi/3KrlLbCsadI/mqdefault.jpg)
Comment below what video you want me to make next
Hi, thanks for the great video. 😀
The shape is applied with me in the end, it remains only how to control the opening of the shape, each element individually
Press the button (tab) on your keyboard and then select one panel it then the parameter will appear
It did work, a warning said "mass contains only mesh geometry which can’t be used to compute mass floors volume or surface area". Now sure if that's what the problem is and if it is, how to fix it?
Please make sure to create the panels with the exact steps as shown in the video, also be sure to copy the measurements correctly is you don't you will see that error message
Thx a lot it is useful
it works
but I can't control the shapes,
the shape is opening and closing in family but it doesn't change in the project
Make sure you followed the steps in Dynamo correctly
THANK YOU !
CAN YOU PLEASE RECORD WITHOUT THE MUSIC? It so Annoying
Why? It would be so boring without the background sound. This isn't math class, why not spice it up?
Would you make a tutorial the building that you make on this video
Yes, coming soon
@@simulationcorner4312 thanks for your replay.
My dynamo stuck on run part. how can i solve it?
Isn't it easy to model in grasshopper ?
If you know Grasshopper sure
It tell me that the span is too short when I match the points . How can I solve it ?
The two sides have to add up to a certain number so if it's saying it's too short you must be entering the number that's supposed to be on the other side of the panel or too small for the family you're making
Didn't work for me, kept on bringing the error code.
Please make sure to create the panels with the exact steps as shown in the video, also be sure to copy the measurements correctly is you don't you will see that error message