It happens that I need to start welding myself! I don't mind learning from someone else mistakes, I've been watching some videos with master welders that were having the opposite effect on my confidence...
Chief your gonna do pie cuts with that stainless steel?? He said hit it from the back :) :) :).. in for the welding vlogs always good to learn new skills... Hope your young one will appreciate what you and the misses are leaving for him when he gets older..
Man I just saw them radium fittings on a IG posting. I was going to drill & tap AN fittings into my valve cover but them radium fittings are legit. Thanks my guy!
Drift motion has all of the hoses, those offset smaller one inside the valve covers. Also is this car running a stand alone computer? I am on my Supra infinity 6 but upon decending it falls below normal idle and won't to shut off. Have you had any issues with burping the cooling system? Feedback is welcomed. Thanks
@@boostedproject sweet! I've heard anecdotal stories of totally chewed up turbos running absolutely fine even with chunks missing. With owners only realising incidentally due to other issues that might cause them to come across turbo damage. I.e. these little buggers are resilient. Just ensure comp wheel isn't contacting housing/there isn't too much in out play, as you don't want it grenading into intake 👍
n0v0s yeah I actually ran bad turbo on my eclipse and I never new it until I took off the intake pipe to clean it lol. Thankfully it doesn’t have shaft play and does spin well. But either way, I wouldn’t give it more than this year lol.
Nice video bro, I recently installed a catch can on my supra and noticed I’m getting a lot of blow by coming out of the catch can. I’ll be parked at a stop light and you can literally see all the smoke coming out from underneath the hood. Does your catch can seem to smoke a lot by chance?
This one only does it when it is warming up. I hate to tell you this because I don't want to worry you but my Supra did what yours is doing and I shortly found out the motor was blown.
Awesome dude! Keep it up. And yes show the progress or your welding. I'm self taught and all my car was welded/fabricated by me. Check it out on IG at slolex12. And while your at it, untles you're going to add a coolant temp sensor get rid of the hose on the upper water neck and weld those ports up!
Rick Shults just followed you back bro. And you mean those two little ports where the small hose is like folded and routing back into each other? I was wondering about that.
This man is really good people ... keep going make all your project happening...
Ivan Piedra Thank you so much Ivan.
Attention to detail really makes this pop
Loving your videos man, im a big fan of supras.
2jzSupra thanks bro.
It happens that I need to start welding myself! I don't mind learning from someone else mistakes, I've been watching some videos with master welders that were having the opposite effect on my confidence...
Yeah I’ve seen lots of videos. But honestly you can see so many videos. This is something that you will best learn by experience.
Let's see tht welding😂😂
Johannes Layne lol. It will be rough lol. But I can give it a shot.
Love the enthusiasm and energy man 🤣 you have that cool uncle vibe 🏁🏁🏁
lol Thanks bro.
That little man is a lucky one 4:43
Thank you! I'm lucky to have him.
Supra in my blood keep it coming. Someday I'll have 2jz in my mk3
Yes sir!
Chief your gonna do pie cuts with that stainless steel?? He said hit it from the back :) :) :).. in for the welding vlogs always good to learn new skills... Hope your young one will appreciate what you and the misses are leaving for him when he gets older..
I think I may need to do a few pie cuts not many but I'll make sure and record that.
2:10 I love your point of view on this
Thank you!
Man I just saw them radium fittings on a IG posting. I was going to drill & tap AN fittings into my valve cover but them radium fittings are legit. Thanks my guy!
They are awesome bro, you won't regret it.
Awesome job on the car bro. Would like to see how you do the welding. Keep up the good job.
Thanks bro. I might make a video or two on it then.
@@boostedproject ok bruv, looking forward to it.
“hit it on the back...” lol
Charley__VM lol
The supra videos is about to hit a 1mil bro im gassed for you
Assassin xd yeah bro that is insane!
I mean know that you are not doing yt for money but i hope u get some so you can upgrade the car🤣🤞
Assassin xd lol. It would be nice fir sure. I would then be able to bring videos much more often lol.
Really nice people !!!!!
Love the vids bro keep them coming, also could you possibly make some more content with the mustang? Much love from Utah! 🤘🏼
Dakota Harper thanks bro. And I sure can! Anything in particular you would like to see?
Boosted Project maybe some highway POV with some pulls? Those always tickle everyone’s fancy!❤️
Yes bro do it
Drift motion has all of the hoses, those offset smaller one inside the valve covers. Also is this car running a stand alone computer? I am on my Supra infinity 6 but upon decending it falls below normal idle and won't to shut off. Have you had any issues with burping the cooling system? Feedback is welcomed. Thanks
It has an AEM Infinity. But I haven’t driven it yet so I will find out eventually. I haven’t burped the system yet.
i wanna see the welding
I’ll give it a shot
Guaoooo ya casi lo terminas 😲😲😲🚗🚘🤗😘😘
Ya mero
😍 beautiful car
Thank you.
1:03 One of the vanes on your turbo impeller is chewed up.
Yeah it is. It’s just a temporary turbo. Will go bigger eventually.
@@boostedproject Right on.
90 likes and Z-Ro haters what's up with that LOL good job 😷✌️
Lol. That didn’t last long. They always around lurking waiting to hate lol!
I don't care who you are that's s*** is funny hey bro on a different note need to polish up those headlights it's coming together really nice 😷✌️
Jeremy Lutzz I was going to redo them bro but man I just don’t have time. So I went with something better. You will love them.
Great job. Have you done the Abs delete? If yes, how do you like how it stops
🔥
dfmforlife1 🙏
AWESOME car, what down pipe are you running?
🤯🤯
Turbo needs looking at, comp wheel somewhat shagged!
lol. Yeah it is. It’s just temporary, will go bigger. Just using that until I get it all finished up and wife gets comfortable with the car.
@@boostedproject sweet!
I've heard anecdotal stories of totally chewed up turbos running absolutely fine even with chunks missing. With owners only realising incidentally due to other issues that might cause them to come across turbo damage. I.e. these little buggers are resilient.
Just ensure comp wheel isn't contacting housing/there isn't too much in out play, as you don't want it grenading into intake 👍
n0v0s yeah I actually ran bad turbo on my eclipse and I never new it until I took off the intake pipe to clean it lol. Thankfully it doesn’t have shaft play and does spin well. But either way, I wouldn’t give it more than this year lol.
How you learn to do all this with cars?
Experience honestly. Just got tired to taking my cars to shops and starting doing stuff on my own.
is that a 4" or 5" intake in front of your turbo?
Nice video bro, I recently installed a catch can on my supra and noticed I’m getting a lot of blow by coming out of the catch can. I’ll be parked at a stop light and you can literally see all the smoke coming out from underneath the hood. Does your catch can seem to smoke a lot by chance?
This one only does it when it is warming up. I hate to tell you this because I don't want to worry you but my Supra did what yours is doing and I shortly found out the motor was blown.
What song is this on the intro sounds dope🎶
DJ B I cant remember the name. Found it on TH-cam library
Link to catch can, tap ins, filters and lines? Thank you
Catch can setup(catch can, filters and lines) are from Freed Engineering. The press in fitting are from Radium Engineering
where u get it from
where do you buy your supras? how much do you spend on them?
Search every single market you can think of. And too much lol.
Awesome dude! Keep it up. And yes show the progress or your welding. I'm self taught and all my car was welded/fabricated by me. Check it out on IG at slolex12. And while your at it, untles you're going to add a coolant temp sensor get rid of the hose on the upper water neck and weld those ports up!
Rick Shults just followed you back bro. And you mean those two little ports where the small hose is like folded and routing back into each other? I was wondering about that.
@@boostedproject thanks Sir! And yes, they are very prone to blowing off and the hose dry rots due to the heat and psi easier.
@@boostedproject you can pull them out a tap with a 1/8npt plug also if thats easier.
First!
Finally lol.
Nice work bro, love the radium fittings. What radiator are you running? Didn’t notice a brand on it.
Thanks bro. It doesn't have a brand on it so I am not sure. It came with the car when I bought it.
Boosted Project do you have an IG?