BMW 335i N54 Transmission Swap Into E46 M54
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- 335i N54 transmission (GS6-53BZ) swap into my E46 with an M54.
Seems Legit Garage driveshaft adapter
Seems Legit Garage driveshaft
Fresh Produce MFG transmission mount
XClutch 335i 8-bolt clutch kit
Stock 335i selector rod (flattened)
Hill Performance Bimmers starter adapter
Please let me know if you have any questions.
I’m trying to do a gs6-53bz and b30 swap on my 325i do I just need the starter relocator and drill out two bolt holes to make it work on the m54
I have a clutch flywheel and shifter all set I just need to know if it fits and get a driveshaft and diff then I’m good
Hey man. Watch the video, I explain it all.
I appreciated all the knowledge you all drop for the e46 community.
Trying our best!
Hi. I have a m54 on my vehicle can I put a e90 transmission?
That car is sick…… Does the new transmission have the same gear ratios as the old one?
Thanks! The gear ratios are slightly different - little bit longer.
Awesome I did the opposite!
Installed a n55 into my e46
with a e90 GS6 37bz. That trans allows me to use the e46 6speed driveshaft and e46
6 speed trans brace 🫡
More content with Cory! He is the man!
Car is so sick, this trans option is a game changer for sure
Thanks man! I’ll film some more content with Cory next time I break my car 😂
Finaly found someone that makes all kind of good stuff on e46 😁😃
Trying my best!
Are M54 and M52 bellhousing patterns the same?
I see QuickTime offers a M52 to T56 bellhousing.
I want to put a T56 magnum behind N54, if the bell housings are the same between M54/M52 then the bellhousing should work with minor mods to the bolt holes correct?
Of course I’d have to figure out flywheel/clutch and mounting etc.
Yes they are.
It should work with some modifications. I would run the GS6-53BZ over a T56 though.
thats clean, did you use the entire n54 shifter or just the linkage?
Sorry for the late reply. Just the linkage.
Just curious on how you adjust your clutch pedal, would love mine to grab lower
I was kinda referring to the clutch stop. My bad.
I wish I knew you had a channel! I bought your 330 last year and now I want another e46 already 😅. in love with your build 🔥
Hey dude, glad you found my channel! Which 330 did you buy from me? I had a silver and a black one.
I picked up the black one, after riding in your car and getting used to that car I definitly wanna try out drifting myself. I never would have thought about it not getting the car from you though 😂
Can you use an M54 clutch and flywheel to avoid the starter alignment issue?
You can’t unfortunately, the input shafts are totally different. As well as the flywheel.
@@dylanlobbestael, appreciated, thank you.
What was the intention of drilling the holes? Does it not line up with the block?
The holes on the gearbox are slightly offset so you have to open them up a bit
@@1411MEDIAahhhh makes sense thank you!!
Great vid man
Thanks so much!
hell yeah i guess this is what i gotta do😂
It's probably the most affordable transmission solution at the moment.