The production and overall quality of this video is off the charts. And that's coming from a Swiss guy. Well done, must have taken a lot of sweat to produce this. You can be proud. Cheers from Switzerland
These videos have come a long way! With rockshox suspension, I typically only run 20-25% sag to help with mid stroke diving (Not relevant to flight attendant). Compression can be used up to a few click, but tends to be too much after that. As for rebound start in the middle and bracket up and down, you’ll probably end up a few clicks faster than at halfway.
30% sag is too much for a fork (if measured with weight balanced between front and rear wheels). This would put your weight too far forward. 20% sag on most bikes/forks is ideal. Then work through rebound and compression. Search up Seb Stott's guide from a few year's back for one of the best guides for suspension setup.
“When it comes to suspension and ugly friends…” 😂 In seriousness, love the format and the stress on how, if you’re willing to do your own service, or just pay for service instead of upgrade, you can save money and get performance gains! Spending money on new stuff doesn’t make your bike better for sure, and it doesn’t make you a better rider 🤘🏼
I've been running a Yari 160 fork on my budget 2022 Marin Alpine Trail 7 Enduro Bike. Was $3,000 new in 22 and it seems same spec "budget" bikes now go for $$2,000-$2,400. I upgraded a few of the usual things most MTBs do and my buddies with $4-$6,000 bikes. I've never had problems keeping up and am usually up top climbs and down first. It's a "heavy" bike, prolly around 36lbs, but I also ride 3-4 days a week enduro or xc trails. I rebuild the suspension & drivetrain after the first year because I put 2,500 miles on it and will probably be 3 this year. Point being. You don't need super high end parts or bikes to ride trails and have fun. And you can always slowly upgrade things or replace as you progress and time goes along. Your videos are fun to watch because a lot of us can relate to these things getting into the sport ! Keep em coming!
Epic video bro! You’ve really stepped it up over the last year! Tires upgrade > suspension. Custom tuned suspension > electronic BS. Keep up the excellent work my guy!
I spent $22 on a Krsec AliExpress stem and $60 for a clone novitech hub for my 6k Cannondale Jeckyll. Absolutely proud of it. 😂 We're all the same with different budgets.
I’ve dropped far too much money on high end bikes over the years, but largely because I just like getting my stuff dialed in exactly how I want it. For people newer to the sport who really want to improve performance, a properly fit mid range bike with dialed in components will be significantly cheaper than a high-end bike dialed in the same way and will barely give up any performance. Combine that mid range bike with proper nutrition, fitness, and skill training (even if paying for real coaching) and you will be a much better rider than the person who just throws money at their bike. For racers, honest evaluation of where you fall in your class will almost certainly prove that training and fitness are the better investment in time and money than any gear.
You're doing a great work! That's pretty interesting topic to discuss and your area is so damn cool! And you even prevented all the questions we may have by doing your lowers service and getting shock for your frame.
I have the same Lyrik Select+, you can upgrade it to charger 2.1 RC2 changing the entire cartridge for about 250$, you can also fit the new Charger 3 RC2 with buttercups for about the same price (the only problem is that you're limited to 160mm of travel) and last option, but the one that I've chosen, you can install the Push HC97 compression and basically get a RC2 (with 28 clicks of LSC and HSC) for 100$ shipped, is currently discounted
Hey Evan you can upgrade that foc float to have low speed compression buy just ordering the low speed compression dial rebuild kit from fox. It took my less then 10 minutes to do
difference between fox/rockshox is that fox suspension has a consistent stiffness all the way through the travel, whereas rockshox has the progressive. For me, I much rather the feeling of the fox, but I know that a lot of people prefer rockshox, I guess it's up to what you are used to/what feels more comfortable for you.
@@EvansMTBSaga Oh i get that, if you want to buy it its your bike and money so you do what you want, I feel people are so worried about every last gram or if they have the latest and greatest damper, that they are sorta pressed into having up to date parts or gear. But i think the best way to shave seconds off your time is to improve your skills by riding more challenging terrain or bettering your fitness. And you didnt seem to be encouraging anyone to buy the newest suspension or anything which is one of the things i like about your channel. But for most people i really dont think you should spend all that money for the half second gain. That comment came off more mean than i meant it to :/
I upgraded from the Recon, on my Siskiu T6 to a Used Pike Select 2021. I bought it used for a great price, and in near new condition. Wow, so much lighter, and it runs better on the trail to boot. No chips in the stantions, luckily. Slightly older used Pike Select can be had for under 300.
I have had quite a lot of experience with the suspension on the low bike and I can say for sure that flat feeling is just a fox problem. I have rode that shock brand new on a specialized status and I couldn't tolerate how terrible the feeling of it was. I ended up changing it to a rockshox monarch fron 2019 and it was 3x better instantly without even being tuned for the frame. As for the lyric fork. I have over a year spent riding a base level one from 2019 and the best tip I could give you would be to set the sag at or just under 25% and either speed up the rebound a bit or add another volume spacer to keep the fork in the soft begging of it's travel. I live in New Zealand though and I ride like I'm on crack so I have a much harder suspension setup than most. (185 psi rear and 95 front for a 60 kg rider) hope that helps though. I am loving the series so far and I've got to say that was a very nice touch adding the $ per second in there to show the true value.
I put a RS Charger 2.1 RC2 damper and the corresponding updated air can in my 2020 RS Revelation, turning a rather mudane fork into a Pike Ultimate for only a couple hundred bux.....Rockshox upgrades are an inexpensive DIY performance upgrade if you're handy with tools.
I would love to upgrade my 22' Revelation. Im just scared to do it myself. I know the RS app shows all the upgrades, but does it show all the proper tools needed??
@@mikeburgh3956 I had NO special tools at all, but did buy the requisite oil and lubes recommended by RS. It took about 2 hours to do both tubes. I did have a brain fart, and forget to purge the air can of PSI and almost blew a hole in my face when the cap finally unscrewed all the way - scared the heck out of me (can't believe I forgot to do such a fundamental task!) - was going to use the stock air damper, but had to order the upgraded version cuz I nicked the shaft when it shot past my face into the garage rafters. Kinda glad I got the upgrade air damper, because it rides higher in the travel and is more plush than stock. RS Trailforks app, has a list of all the upgrades for your serial number....so much easier to find out info than with fox stuff.
Only charger 3 and above are fitted with buttercups. Flight Attendant needs a charger 3 damper to operate. It is a three position damper with open , pedal, and lock. Which the FA system selects through.
I love my 1000 dollar basic hardtail. All I can afford but still beats the 80s bikes I learned on. Gear helps. I own a 10k guitar, it sounds good. But I had been plating for 11 years before I got one.
@EvansMTBSaga they probably sell a surprisingly small number of them for the cost of the engineering, patents, and low volume manufacturing. Every time you buy one you're probably paying for the engineer's time lol.
I suspect the time difference between high and low bike on the tech trail was due to fatigue. The improvement in smoothness with the FA suspension is likely more to do with being brand new, and low bike's suspension probably needs a damper service at both ends. The Lyrik is a buttery smooth fork if it's not in need of a damper service.
You can upgrade the LSC adjuster on the Fox Float X Performance, making it a lot more adjustable. Upgrade costs 20ish dollars and maybe half an hour for install.
I have the same deluxe+ and ride Colorado chunk. To improve the feel on the chunk, drop the psi a bit and bump up the *rebound*. I have a couple tokens in mine as well (155lbs). If gets chunky i drop the compression a bit and when the trails are flowy and jumpy a bump it up. Its been working well and ive yet to bottom out.
Is a lyrik select+ really a low end end option, more like old high end vs new high end. Feel like would have been more value in comparing a Yari with a MC damper vs the Lyrik.
Your editing skills have really improved! All the graphics and animations fit with the video style. The audio levels are also great! Do you use adobe premiere pro/aftereffects?
It is. If you look back at my videos, I'm constantly reusing parts for builds to keep costs down. The entire YT was purchased as a parts bike for this series 😁
So what we've learned is that a suspension upgrade is always worth it and the best suspension is the one you can find the best deal on. Btw I'm stealing "Hold my electrolytes!"
@@EvansMTBSaga sweet! Those aftermarket components can really improve the performance. I still have my Megneg and I might put that on my newer ultimate shock and see how it feels 👍
Most fork scratches that are surface have no effect on overall performance, it’s the larger ones that get it there and tear it apart from the inside out, if it really bugs you you can simply put some black nail polish on there you can’t tell unless your really looking for it
110 sounds like a pretty high pressure. I’m 190 as well and I’m at 97 for 30% sag. I know setting based on sag on the lyrik B1 spring is hard you kinda have to mess with lowering the pressure.
You should also add a “fun” category. Did the new parts make the bike noticeably more fun/enjoyable to ride? That’s the whole point of mountain biking for your average rider
@@EvansMTBSaga I ride upper mid level bikes. I have a GX Kenevo Comp for an EMTB and a AL Canyon Grizl with the Rockshox Rudy fork for the chunky gravel here in WA. I haven’t had any crazy nice bikes yet but planning on getting a pretty sick Amish bike eventually. I’m a slightly above average rider anyway so I’m not sure if I’d benefit from crazy nice suspension. Would be fun to do a test like this myself!
I've seen some pretty gnarly crashes from forks breaking and I don't really care too much what my bike weighs, so I'm running Fox 40's and a full face helmet (Fox Rampage) 😅
These videos are so good to watch, very high quality. However having good parts doesn’t only affect your times, it affects the feel on the trail, the comfort, tricks and so much more, could be worth taking into consideration for all the expensive parts?
Alot of expensive upgrades are not worth it. But some make it really better. Like suspension, its not so much about seconds but the feel on the ride. I have superdeluxe ultimate thrushaft on my slash and select plus on my rail. While i would probably ditvh more or less same seconds on both. The ride feel is not even close. The ultimate feels so smooth and comfortable. So maybe not worth in seconds but worth in feel. However flight attendent is mostly overkill
@@EvansMTBSaga isn't it the 'feel' that increases your confidence to attack a faster line? OTOH, for me, upgrades like carbon fiber stems and handlebars that improve 'feel' would not increase my confidence because that next gap I case could result in catastrophic failure
Although, isn't the price kinda off? One is used, the other is new, how much was it when new? Because that's a better comparison in price. And also because it's used there might be issues, that sticktion might have something to do with that.
Not sure if I'm right (i don't know those trails), but looks like not a single crank was performed during the descents and that's where the flight attendant shines.
Yeah that's the rule throughout the series. No pedaling on the downhill, so you're right. Although Chad said that the suspension does firm a little on the downhill jumpy trails and the bike was faster on those trails
Charger 3 uses Pistons inside the damper but the older Charger 2.1 uses a expanding and contracting bladder that makes the older one a bit more sensitive to small bumbs and a lil blusher
I'm pretty sure you tightened the bolts on the budget fork when it was compressed. Doing that will create a vacuum in the lowers, that's why had to put way more pressure in it compared to the other fork. Always pump like 25 psi in the fork(so that it extends fully) before tightening the screws on the bottom. The pressures should be pretty close in both forks at the same sag. The low bike must feel awful with that much pressure.
@@EvansMTBSaga You don't have to take it apart, don't let the air out either. Just unscrew the 2 bolts half way and push them in, you should hear some air rushing in. With high end forks you can just use the pressure release valves, those work both ways.
Suspension manufacturers will do some internal tuning and valve adjustments to suit the rear linkage design, kinematics and geometry changes durning travel. A Santa Cruz 5010 VPP design (stable under pedal load) is different than a Specialized Stumpjumper’s FSR (active under pedal load), and have different travel arcs. The Sisku, I believe, is single pivot, which behaves differently than the previous 2. The shock that comes on a frame when you buy it as a complete bike or just frame by itself is most likely tuned for that frame, and using it as a take off for a different frame design can result in sub-optimal performance.
I don't need Supersession from top shelf because I am amator and Ride in freeride. My suspension is set to max hard. I need only Basic select. It all depends on what the bike is to be used for, in my opinion, and that's it
Nice as always, by the way, I'm about to buy a new bike that cames with a flight attendent set up, hopefully i won't regreat, in question of the time per lap it's could be also o with the rider fatigue.
@@EvansMTBSaga hopefully yes. Then i need to also do the tubeless conversion and i will use the milkit valves like i already told you in another video. Related to the tyres for me the continental are better than the specialized and I tried both
Another great video. When I was building Weight Weenie Bikes I always did a Dollar per Gram analysis. Great to see you doing a Dollar per Second analysis. 🤘🏻
Heck yeah man! Glad to hear other people are doing a cost per second analysis. I don't see anyone else doing it on TH-cam, so sometimes I think "do people care about timed runs as much as I do?"
Maybe I'm being picky about the video, and maybe you were limited by availability for used parts... but you could have found a used Lyrik ultimate with a charger 2.1 for probably just a few bucks more which would have been a serious upgrade over the select
Oh, I made this comment before you said the select had the charger 2.1 lol. My bad... Also, I had no idea flight attendant only works with SRAM. I hate that because I know SRAM owns RS but I prefer RS suspension and Shimano drivetrain 😢
@@EvansMTBSaga I have lost 50 lbs since October, but I am 6 feet tall, I am never going to be 155 lbs. I just find it odd, given the average weight in the US is 199.7 lbs. (Canada is 187)
Oh yes the High Low song is back!!! Now it really feels like a Hi Low episode! Great job with the edits as well!
The production and overall quality of this video is off the charts.
And that's coming from a Swiss guy.
Well done, must have taken a lot of sweat to produce this.
You can be proud.
Cheers from Switzerland
Thank you! I put in a lot of work, especially on those animations! Thanks for the compliments
Love the cost per second evaluation....
That helps me in the diminishing returns category. 😊
These videos have come a long way! With rockshox suspension, I typically only run 20-25% sag to help with mid stroke diving (Not relevant to flight attendant). Compression can be used up to a few click, but tends to be too much after that. As for rebound start in the middle and bracket up and down, you’ll probably end up a few clicks faster than at halfway.
30% sag is too much for a fork (if measured with weight balanced between front and rear wheels). This would put your weight too far forward. 20% sag on most bikes/forks is ideal. Then work through rebound and compression. Search up Seb Stott's guide from a few year's back for one of the best guides for suspension setup.
i love your videos. they taught me i dont need to have top end expensive part to have fun. thank you so much
Lmao I love the format of this video because it’s the same as Donut media 😂😂 High/low series
Still just as good
Hey Evan to make sure you don’t get the chatter on the rocks put the rebound up so that it can take every rock individually, if you know what I mean
Great video love the content and hope you are having fun with these bikes
“When it comes to suspension and ugly friends…” 😂
In seriousness, love the format and the stress on how, if you’re willing to do your own service, or just pay for service instead of upgrade, you can save money and get performance gains!
Spending money on new stuff doesn’t make your bike better for sure, and it doesn’t make you a better rider 🤘🏼
Haha full disclaimer - that was a line from donut media's High Low
@@EvansMTBSaga that’s still funny 😆
I've been running a Yari 160 fork on my budget 2022 Marin Alpine Trail 7 Enduro Bike. Was $3,000 new in 22 and it seems same spec "budget" bikes now go for $$2,000-$2,400. I upgraded a few of the usual things most MTBs do and my buddies with $4-$6,000 bikes.
I've never had problems keeping up and am usually up top climbs and down first. It's a "heavy" bike, prolly around 36lbs, but I also ride 3-4 days a week enduro or xc trails. I rebuild the suspension & drivetrain after the first year because I put 2,500 miles on it and will probably be 3 this year. Point being. You don't need super high end parts or bikes to ride trails and have fun. And you can always slowly upgrade things or replace as you progress and time goes along.
Your videos are fun to watch because a lot of us can relate to these things getting into the sport ! Keep em coming!
Editing and quality/production value are top notch on this video. You can tell a lot of work went into it!
Thanks!!! That rear shock animation was made entirely from scratch and took hours and hours haha
@@EvansMTBSaga nice thought that was pretty cool 👍🏼
Evan, I'm local, and I have a lyrik select with bad lowers if you decide you need want to replace your stanchions!
Epic video bro! You’ve really stepped it up over the last year! Tires upgrade > suspension. Custom tuned suspension > electronic BS. Keep up the excellent work my guy!
You spend $500 on a fork, I spend $500 on a bike. We are not the same.
Watch the very first episodes Evan made and he started with a very cheap bike and started upgrading. He mostly uses used bikes and parts.
That's fine. I hope you found the video enjoyable
I spent $22 on a Krsec AliExpress stem and $60 for a clone novitech hub for my 6k Cannondale Jeckyll.
Absolutely proud of it. 😂
We're all the same with different budgets.
@@EvansMTBSaga Lmao, it's a meme format. The video was entertaining enough. Hope you enjoyed making it.
😂😂😂 I love the “budget reviews” where the cheapest bike is 5k. Like, I have to put the cheapest option on layaway? 🤬
i loved the original high low series im so pumped you decided to do it again
I’ve dropped far too much money on high end bikes over the years, but largely because I just like getting my stuff dialed in exactly how I want it. For people newer to the sport who really want to improve performance, a properly fit mid range bike with dialed in components will be significantly cheaper than a high-end bike dialed in the same way and will barely give up any performance. Combine that mid range bike with proper nutrition, fitness, and skill training (even if paying for real coaching) and you will be a much better rider than the person who just throws money at their bike. For racers, honest evaluation of where you fall in your class will almost certainly prove that training and fitness are the better investment in time and money than any gear.
You're doing a great work! That's pretty interesting topic to discuss and your area is so damn cool! And you even prevented all the questions we may have by doing your lowers service and getting shock for your frame.
Haha I remember all the comments from last time! I am a little bummed because less comments this time around, so I appreciate you!
Production quality is wild. The scripting and preparation this surely took is admirable and appreciated!
I have the same Lyrik Select+, you can upgrade it to charger 2.1 RC2 changing the entire cartridge for about 250$, you can also fit the new Charger 3 RC2 with buttercups for about the same price (the only problem is that you're limited to 160mm of travel) and last option, but the one that I've chosen, you can install the Push HC97 compression and basically get a RC2 (with 28 clicks of LSC and HSC) for 100$ shipped, is currently discounted
Well produced video. Great acting, videography and formatting. Keep it up.
I absolutely love this series and all the love and attention you put into it!
Hey Evan you can upgrade that foc float to have low speed compression buy just ordering the low speed compression dial rebuild kit from fox. It took my less then 10 minutes to do
difference between fox/rockshox is that fox suspension has a consistent stiffness all the way through the travel, whereas rockshox has the progressive. For me, I much rather the feeling of the fox, but I know that a lot of people prefer rockshox, I guess it's up to what you are used to/what feels more comfortable for you.
Moral of he story: dont spend thousands on suspension. Youre not a pro so save your money and take the extra second :)
I appreciate the comment. But the argument "youre not a pro, so don't buy _____" is flawed. Anyone can buy anything.
Don't tell me what to do 😂 jk. I wouldn't spend money like that
I don't but useless stuff, but expensive components shouldn't be limited to pros. I hear what you're saying tho
@@EvansMTBSaga Oh i get that, if you want to buy it its your bike and money so you do what you want, I feel people are so worried about every last gram or if they have the latest and greatest damper, that they are sorta pressed into having up to date parts or gear. But i think the best way to shave seconds off your time is to improve your skills by riding more challenging terrain or bettering your fitness. And you didnt seem to be encouraging anyone to buy the newest suspension or anything which is one of the things i like about your channel. But for most people i really dont think you should spend all that money for the half second gain. That comment came off more mean than i meant it to :/
I just want small bumps compliance and sadly that shit is expensive 😂
I upgraded from the Recon, on my Siskiu T6 to a Used Pike Select 2021. I bought it used for a great price, and in near new condition. Wow, so much lighter, and it runs better on the trail to boot. No chips in the stantions, luckily. Slightly older used Pike Select can be had for under 300.
Your videos dramatically improved! High quality
First thing, fantastic video which provided so much information and detail. You definitely earned a subscriber! - Keep it up
I have had quite a lot of experience with the suspension on the low bike and I can say for sure that flat feeling is just a fox problem. I have rode that shock brand new on a specialized status and I couldn't tolerate how terrible the feeling of it was. I ended up changing it to a rockshox monarch fron 2019 and it was 3x better instantly without even being tuned for the frame. As for the lyric fork. I have over a year spent riding a base level one from 2019 and the best tip I could give you would be to set the sag at or just under 25% and either speed up the rebound a bit or add another volume spacer to keep the fork in the soft begging of it's travel. I live in New Zealand though and I ride like I'm on crack so I have a much harder suspension setup than most. (185 psi rear and 95 front for a 60 kg rider) hope that helps though. I am loving the series so far and I've got to say that was a very nice touch adding the $ per second in there to show the true value.
I put a RS Charger 2.1 RC2 damper and the corresponding updated air can in my 2020 RS Revelation, turning a rather mudane fork into a Pike Ultimate for only a couple hundred bux.....Rockshox upgrades are an inexpensive DIY performance upgrade if you're handy with tools.
Nice man! And hats off to Rockshox for making everything DIY friendly like using a cassette tool to remove the air side cap
I would love to upgrade my 22' Revelation. Im just scared to do it myself. I know the RS app shows all the upgrades, but does it show all the proper tools needed??
@@mikeburgh3956 I had NO special tools at all, but did buy the requisite oil and lubes recommended by RS. It took about 2 hours to do both tubes. I did have a brain fart, and forget to purge the air can of PSI and almost blew a hole in my face when the cap finally unscrewed all the way - scared the heck out of me (can't believe I forgot to do such a fundamental task!) - was going to use the stock air damper, but had to order the upgraded version cuz I nicked the shaft when it shot past my face into the garage rafters. Kinda glad I got the upgrade air damper, because it rides higher in the travel and is more plush than stock. RS Trailforks app, has a list of all the upgrades for your serial number....so much easier to find out info than with fox stuff.
Extremely well done video. I really enjoyed watching it.
Only charger 3 and above are fitted with buttercups. Flight Attendant needs a charger 3 damper to operate. It is a three position damper with open , pedal, and lock. Which the FA system selects through.
That's not true. Mine is the first gen flight attendant released in 2022
Props to your wife for letting you buy all this stuff 😅
She's my #1 supporter ❤️
Behind every good TH-camr is the best wife ever........plus TH-cam money helps 😂😂😂
TH-cam money is barely paying the bills in this economy unfortunately. 2 episodes in and haven't had an ad read either. Hoping to break even though
@@EvansMTBSaga so the 1st part is the most important best wife ever
Just watched bunch of the ads, hope it helps@@EvansMTBSaga
I love my 1000 dollar basic hardtail. All I can afford but still beats the 80s bikes I learned on. Gear helps. I own a 10k guitar, it sounds good. But I had been plating for 11 years before I got one.
loved every second of this, great job man
Thanks man! New episode tomorrow!
Those prices for the Flight Attendant are pure fantasy
Haha yeah idk why they settled at that crazy price
Cant you get full xo1 transmission for 2k?
@EvansMTBSaga they probably sell a surprisingly small number of them for the cost of the engineering, patents, and low volume manufacturing. Every time you buy one you're probably paying for the engineer's time lol.
Good stuff. Want this channel to thrive!
Thanks Abe!
Trek Fuel Ex 7 is a 2015 model. What do you think? Could it be a good option?
I suspect the time difference between high and low bike on the tech trail was due to fatigue. The improvement in smoothness with the FA suspension is likely more to do with being brand new, and low bike's suspension probably needs a damper service at both ends. The Lyrik is a buttery smooth fork if it's not in need of a damper service.
You can upgrade the LSC adjuster on the Fox Float X Performance, making it a lot more adjustable. Upgrade costs 20ish dollars and maybe half an hour for install.
A got a lyrik select on my honzo a got it cheap from chain reaction during there closure sales its very good
I have the same deluxe+ and ride Colorado chunk. To improve the feel on the chunk, drop the psi a bit and bump up the *rebound*. I have a couple tokens in mine as well (155lbs). If gets chunky i drop the compression a bit and when the trails are flowy and jumpy a bump it up. Its been working well and ive yet to bottom out.
Love the quality of your video man !!
These comparison videos are brilliant.
Thanks Rob!! More to come
I’m digging Chad’s “Send -Daddy” button up shirts.
Best mountain bike content creator on the Internet!!!!
The part you removed from the pedals is actually not shown in the video right? It’s actually a small o ring that you need to take out.
Oh I went back to the document and you're right. I gotta check that out now. Thanks
I threw them away and then mowed the lawn and all the grass clippings are on top. I can't find them lol
Oh no!!!
I run the lyrik charger 2.1 on my remedy. Its a unbelievable fork, 160mm of super plush traction
Is a lyrik select+ really a low end end option, more like old high end vs new high end. Feel like would have been more value in comparing a Yari with a MC damper vs the Lyrik.
I think it's one step above low end, there's some crazy deals these days
I love this series. It helps me figure out where the real value is at. Can you do a hi/low on a wheelset?
Yeah wheels will be coming soon
Your editing skills have really improved! All the graphics and animations fit with the video style. The audio levels are also great! Do you use adobe premiere pro/aftereffects?
0:26 I wouldn’t call a suspension upgrades “easy” necessarily. But most effective, most impactful
You can try Volume Spacers in the fork and shock. But I am sure you already considered it.
Is that nice Lyrik from the YT bike you rebuilt not too long ago?
It is. If you look back at my videos, I'm constantly reusing parts for builds to keep costs down. The entire YT was purchased as a parts bike for this series 😁
@@EvansMTBSagaClever! 👍 😉
So what we've learned is that a suspension upgrade is always worth it and the best suspension is the one you can find the best deal on.
Btw I'm stealing "Hold my electrolytes!"
Chad 😂
Great video man! I get great performance from my inexpensive suspension. They’re much easier to tune also which is a massive plus for me 👍
Absolutely. I wanna try the little mods like Vorsprung or w/e. Similar to what you did with the MegNeg
@@EvansMTBSaga sweet! Those aftermarket components can really improve the performance. I still have my Megneg and I might put that on my newer ultimate shock and see how it feels 👍
Most fork scratches that are surface have no effect on overall performance, it’s the larger ones that get it there and tear it apart from the inside out, if it really bugs you you can simply put some black nail polish on there you can’t tell unless your really looking for it
Just put forks and shock on my daughter’s bike, and upgraded my son Jeffsey to a floatX. World of difference
110 sounds like a pretty high pressure. I’m 190 as well and I’m at 97 for 30% sag. I know setting based on sag on the lyrik B1 spring is hard you kinda have to mess with lowering the pressure.
You should also add a “fun” category. Did the new parts make the bike noticeably more fun/enjoyable to ride? That’s the whole point of mountain biking for your average rider
Good point. The expensive suspension definitely made me happier
@@EvansMTBSaga I ride upper mid level bikes. I have a GX Kenevo Comp for an EMTB and a AL Canyon Grizl with the Rockshox Rudy fork for the chunky gravel here in WA. I haven’t had any crazy nice bikes yet but planning on getting a pretty sick Amish bike eventually. I’m a slightly above average rider anyway so I’m not sure if I’d benefit from crazy nice suspension. Would be fun to do a test like this myself!
The flight attendant just looks so good
It would be interesting to compare intend suspension or push.
I've seen some pretty gnarly crashes from forks breaking and I don't really care too much what my bike weighs, so I'm running Fox 40's and a full face helmet (Fox Rampage) 😅
These videos are so good to watch, very high quality. However having good parts doesn’t only affect your times, it affects the feel on the trail, the comfort, tricks and so much more, could be worth taking into consideration for all the expensive parts?
the best high low series!!!,......love it!
I got a pike ultimate, and now all of my cheaper suspension on other bikes makes me sad.
Alot of expensive upgrades are not worth it. But some make it really better. Like suspension, its not so much about seconds but the feel on the ride. I have superdeluxe ultimate thrushaft on my slash and select plus on my rail. While i would probably ditvh more or less same seconds on both. The ride feel is not even close. The ultimate feels so smooth and comfortable. So maybe not worth in seconds but worth in feel. However flight attendent is mostly overkill
Expensive suspension definitely has an unmatched feel. I've tried flight attendant for a few months and I love it haha
@@EvansMTBSaga isn't it the 'feel' that increases your confidence to attack a faster line? OTOH, for me, upgrades like carbon fiber stems and handlebars that improve 'feel' would not increase my confidence because that next gap I case could result in catastrophic failure
Does the t7 come with those bad rear shocks factory cuz mine come with a rockshox factory
No that was an upgrade in the video
Can you point me in the direction of your prescription MTB glasses?
The ones in this video were not prescription, I was wearing contacts. But the ones I normally wear: www.sportrx.com/?EvansMTBSaga&TH-cam&Influencer
The fancy stuff is cool, but the "cheap" suspension is already expensive to me 😆
Although, isn't the price kinda off?
One is used, the other is new, how much was it when new? Because that's a better comparison in price.
And also because it's used there might be issues, that sticktion might have something to do with that.
I'm doing the best with what I have available. It's a very expensive series 😔
@@EvansMTBSaga true, this is part of high low and not really a true assessment of forks, more a buyer's guide of sorts I guess.
Curious why you didn’t compare against something a little more specialized for the high end like push, ohlins, cane creek…
I wanted to! But I asked the audience back in February and it was overwhelmingly in favor of regular high end vs mid tier
Love it. These videos are really good to watch 👍🤘
Heck yeah thanks Steve!
So what sort of pre owned shock would be a good upgrade on the Siskiu t8 with a stock Fox Float dps ?
A Rockshox super deluxe if you can find one around $300 would be a good option
Not sure if I'm right (i don't know those trails), but looks like not a single crank was performed during the descents and that's where the flight attendant shines.
Yeah that's the rule throughout the series. No pedaling on the downhill, so you're right. Although Chad said that the suspension does firm a little on the downhill jumpy trails and the bike was faster on those trails
Charger 3 uses Pistons inside the damper but the older Charger 2.1 uses a expanding and contracting bladder that makes the older one a bit more sensitive to small bumbs and a lil blusher
Heck yeah. I'd probably like the 3 more. But I have a Zeb with 2.1 and it's so plush
i have a 32 Performance FIT CTD should i upgrade (this is satirical ik i should but im too poor lol)
I'm pretty sure you tightened the bolts on the budget fork when it was compressed. Doing that will create a vacuum in the lowers, that's why had to put way more pressure in it compared to the other fork. Always pump like 25 psi in the fork(so that it extends fully) before tightening the screws on the bottom. The pressures should be pretty close in both forks at the same sag. The low bike must feel awful with that much pressure.
Cool I will do that immediately cuz running 110 psi was a bit unnerving haha. It still felt great surprisingly
@@EvansMTBSaga You don't have to take it apart, don't let the air out either. Just unscrew the 2 bolts half way and push them in, you should hear some air rushing in. With high end forks you can just use the pressure release valves, those work both ways.
Noted ✔️ for when I service my Revelation
What lube do you use Evan? I just started using Silca hot wax, my chain is super quiet now😮
I have to switch between dry and wet lube all the time because of trail conditions. The rain blasts off the wax unfortunately
I got a new bike a few days ago with Lyrik select/Deluxe Select+ 😅
Good suspension!
What do you mean “tuned for the frame” regarding the shock
Suspension manufacturers will do some internal tuning and valve adjustments to suit the rear linkage design, kinematics and geometry changes durning travel. A Santa Cruz 5010 VPP design (stable under pedal load) is different than a Specialized Stumpjumper’s FSR (active under pedal load), and have different travel arcs. The Sisku, I believe, is single pivot, which behaves differently than the previous 2.
The shock that comes on a frame when you buy it as a complete bike or just frame by itself is most likely tuned for that frame, and using it as a take off for a different frame design can result in sub-optimal performance.
@@j.l.5966 ahh thank you. Would you take the shock to a suspension shop if you wanted to adjust the valves and other internal s?
"Chad" needs to upgrade his brakes! I'm still running the MT200 stock brakes, but I'm not riding as aggressively either.
I have a sisku T7 and want to upgrade to what you have. Did you stay with the same offset and travel like the stock forks?
Yup same offset and travel! If you're riding steep stuff, I'm sure 10mm more travel in the front would work well
@@EvansMTBSaga and Im guessing for the rear shock you put another 215x55 back on there since you found another rear shock from the T8 or T9 model?
@@Token650 yeah its a 210x55. I don't think the rear end can be overstroked
I don't need Supersession from top shelf because I am amator and Ride in freeride. My suspension is set to max hard. I need only Basic select.
It all depends on what the bike is to be used for, in my opinion, and that's it
Love the videos man❤
Nice as always, by the way, I'm about to buy a new bike that cames with a flight attendent set up, hopefully i won't regreat, in question of the time per lap it's could be also o with the rider fatigue.
Dude flight attendant will put a smile on your face!!
@@EvansMTBSaga hopefully yes. Then i need to also do the tubeless conversion and i will use the milkit valves like i already told you in another video. Related to the tyres for me the continental are better than the specialized and I tried both
Another great video. When I was building Weight Weenie Bikes I always did a Dollar per Gram analysis. Great to see you doing a Dollar per Second analysis. 🤘🏻
Heck yeah man! Glad to hear other people are doing a cost per second analysis. I don't see anyone else doing it on TH-cam, so sometimes I think "do people care about timed runs as much as I do?"
hey, what torque wrench you have?
Maybe I'm being picky about the video, and maybe you were limited by availability for used parts... but you could have found a used Lyrik ultimate with a charger 2.1 for probably just a few bucks more which would have been a serious upgrade over the select
Oh, I made this comment before you said the select had the charger 2.1 lol.
My bad... Also, I had no idea flight attendant only works with SRAM. I hate that because I know SRAM owns RS but I prefer RS suspension and Shimano drivetrain 😢
Yeah I said at the end of the video that an Ultimate is like $500 used
For me, upgrades haven’t made me much faster, but it has been more comfortable and I enjoy my rides more.
Definitely! The flight attendant makes rides more enjoyable as well so I get itb
i do t know what to do cuz i am saving for the high bike’s suspension but when i click your link it says that the cost is 4000 not 2800
Wow that's crazy. It used to say $2800
absolute banger of a title
Haha dude I'm tired from going all out on this series
@@EvansMTBSaga it shows man, great video! take care tho
You can buy the low speed compression knob for the float x i think that fanatik did a video about it also love the vid❤
Great video really enjoyed it. Looking forward to the wireless setup 😀
190 lbs is a "heavier rider"??? What sort of standard are you comparing to? (188 lbs here)
Much lower is really unrealistic for America 😂
Well it's close to 200 and that's when people start saying heavier rider. There's dudes out there riding around at 155lbs 😭
@@EvansMTBSaga I have lost 50 lbs since October, but I am 6 feet tall, I am never going to be 155 lbs. I just find it odd, given the average weight in the US is 199.7 lbs. (Canada is 187)
@@hannes6114 That was sort of my point, see my other comment on average wieghts
270 lbs rider here. (Started out at over 300)
Hey if been wondering if you may sponsor?me a bicycle by chans I am in need for one or if you have old brakes forks... Enyting helps
🙏😅
You should do new vs old, the best old parts vs budget new parts
Dude, where did you get your dinosaur shirt from?! I want one!
They're called Party Shirts! partyshirtinternational.com/collections/theshirts
I love the Evan Lolo vs Giga Chad money bags episodes.
I’ve been waiting for this video. I was wondering if buying electronics suspension is worth it for my canyon torque on
I'd love to try it on my E-Bike. If you have the money, I think it's great suspension and makes me smile every time I ride it
Marzzochi is also a good option for a lower end fork
I did that last season and the fork didn't have foam rings under the dust wipers haha